[Sat Jun 15 20:07:41 2013] Detection parameters: Position = (296.6, 250.1) = 5 35 48.78 -69 20 4.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 125.4 +/- 21.4 Background counts = 133.4 Rate = 0.001 +/- 0.0003 [Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 3.51' [Sat Jun 15 20:08:43 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 8.18" [Sat Jun 15 20:08:43 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.882 [Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 8.18" [Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src36.ximg exists [Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src36.csv [Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src36_1.ximg exists [Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src36.csv [Sat Jun 15 20:08:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src36_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists [Sat Jun 15 20:08:45 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly [Sat Jun 15 20:09:22 2013] Spatial fit model total counts = 1866.300000, observed total counts = 1867.000000 [Sat Jun 15 20:09:22 2013] Offset between fit and detection position for source 56 = 5.729680 pixels [Sat Jun 15 20:09:22 2013] 1847.772000 total counts/ 1573.410000 bgd. counts: snr = 6.916765 Spatial fit parameters: Offset between fit and detection position for source 56 = 5.729680 pixels Position = (301.1, 246.6) = 5 35 45.04 -69 20 21.6 Extent = 16.4 (16.3-32.7)", rotation angle = 0 Source counts = 274.4 +/- 43.0 Background counts = 1573.4 Rate = 0.003 +/- 0.0004 [Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:22 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:22 2013] Source does appear to be extended [Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:10:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 16.36" [Sat Jun 15 20:10:12 2013] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.991 [Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 16.36" [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src35.ximg exists [Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src35.csv [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src35_1.ximg exists [Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src35.csv [Sat Jun 15 20:10:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Sat Jun 15 20:10:14 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Sat Jun 15 20:10:53 2013] Warning, spatial fit 35 centroid is now closest to src. 57 [Sat Jun 15 20:10:53 2013] Source 56 is offset by -3.217793 and 6.862506 pixels which is larger than 2 X fitted extent = 2.025963 x 2.025963, not incorporating fit results [Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:10:53 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:10:53 2013] Source does appear to be extended [Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(26151.116000, 21406.086000, 981.870028, 981.870028, 0.000000, X, Y) [Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_src.reg [Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (245, 190) - (358, 303) [Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(26151.116000, 21406.086000, 1636.450047, 3272.900094, X, Y) && !ellipse(26270.086042, 24227.261800, 1289.624037, 1289.624037, 0.000000, X, Y) && !ellipse(26264.162537, 24470.363678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.776154, 24730.689301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30035.785645, 23338.389282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25253.712200, 22024.064600, 1285.272037, 1285.272037, 0.000000, X, Y) && !ellipse(25309.174000, 25387.550000, 1108.096032, 1108.096032, 0.000000, X, Y) && !ellipse(27520.318000, 21279.668200, 1362.632039, 1362.632039, 0.000000, X, Y) [Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56.gif [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.evt exist, delete to re-create [Sun Jun 16 03:31:42 2013] Mean detx,y = (-4499.46, 1793.88) [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.img exist, delete to re-create [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.pi exist, delete to re-create [Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_src_b10.pi.gz [Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.pi.gz [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.lc exist, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56.rmf exists, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56.arf exists, delete to re-create [Sun Jun 16 03:37:30 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:30 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 2535.00 [Sun Jun 16 03:37:30 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.pi.gz = 7677.00 [Sun Jun 16 03:37:30 2013] Got source and background scale factors 3029580.000000, 11936577.000000 [Sun Jun 16 03:37:30 2013] User source parameters: Position = (301.1, 246.6) = 5 35 45.04 -69 20 21.6 Extent = 16.4 (16.3-32.7)", rotation angle = 0 Source aperture counts = 586.5 +/- 51.4 Background aperture counts = 1948.5 Rate = 0.006 +/- 0.0005 [Sun Jun 16 03:37:37 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:37:37 2013] Using photon index=1.80, rate=0.0027, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56.arf [Sun Jun 16 03:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:37:38 2013] Updating source flux to 3.6e-14 [Sun Jun 16 03:38:15 2013] Flag b found in src. 56 procflags, skipping spectral fitting [Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete