[Sat Jun 15 20:07:41 2013] Detection parameters:
  Position = (236.8, 278.7) = 5 36 37.86 -69 18 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.9 +/- 15.3
  Background counts = 87.2
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 4.69'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 8.78"
[Sat Jun 15 20:08:43 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.592
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.78"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src33.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src33.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src33.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat Jun 15 20:08:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:22 2013] Source 50 is offset by -8.339664 and 2.411453 pixels which is larger than
2 X fitted extent = 1.138864 x 1.138864, not incorporating fit results
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 8.78"
[Sat Jun 15 20:10:12 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.592
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 8.78"
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src33.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src33.csv
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src33_1.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src33.csv
[Sat Jun 15 20:10:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sat Jun 15 20:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sat Jun 15 20:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat Jun 15 20:10:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:53 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 12.174215 pixels away
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(20550.599228, 24198.390442, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_src.reg
[Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (199, 241) - (274, 316)
[Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(20550.599228, 24198.390442, 1087.500000, 2175.000000, X, Y) && !ellipse(19300.708344, 25985.379150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22135.937134, 27186.421478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21774.074000, 27114.289600, 1294.408037, 1294.408037, 0.000000, X, Y) && !ellipse(23164.460000, 26987.526000, 1263.856036, 1263.856036, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50.gif
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Mean detx,y = (-6153.64, -4140.16) 
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] Not generating rmf since there are only 98 counts
[Sun Jun 16 03:31:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50.arf exists, delete to re-create
[Sun Jun 16 03:37:29 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:29 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 532.00
[Sun Jun 16 03:37:29 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_bgd.pi.gz = 2253.00
[Sun Jun 16 03:37:29 2013] Got source and background scale factors 895376.000000, 4518185.000000
[Sun Jun 16 03:37:29 2013] User source parameters:
  Position = (236.8, 278.7) = 5 36 37.86 -69 18 0.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 85.5 +/- 24.1
  Background aperture counts = 446.5
  Rate = 0.0008 +/- 0.0002

[Sun Jun 16 03:37:29 2013] Updating counts from extracted products
[Sun Jun 16 03:37:29 2013] Set source signif. to 85.52/21.13 = 4.05
[Sun Jun 16 03:37:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:37 2013] Using photon index=1.80, rate=0.000842, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50.arf
[Sun Jun 16 03:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:37 2013] Updating source flux to 2e-14
[Sun Jun 16 03:38:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete