[Sat Jun 15 20:07:41 2013] Detection parameters:
  Position = (296.8, 284.8) = 5 35 48.57 -69 17 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.2 +/- 24.7
  Background counts = 146.3
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 0.99'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 6.93"
[Sat Jun 15 20:08:43 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 6.93"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src30.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src30.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src30.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Jun 15 20:08:45 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sat Jun 15 20:09:22 2013] Warning, spatial fit 30 centroid is now closest to src. 46
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:22 2013] Source is confused with source 6
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 6.93"
[Sat Jun 15 20:10:12 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 6.93"
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src30.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src30.csv
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src30.csv
[Sat Jun 15 20:10:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Jun 15 20:10:14 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Jun 15 20:10:53 2013] Warning, spatial fit 30 centroid is now closest to src. 45
[Sat Jun 15 20:10:53 2013] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 16.732161 pixels away
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(25776.776154, 24730.689301, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_src.reg
[Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (259, 247) - (334, 322)
[Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(25776.776154, 24730.689301, 1087.500000, 2175.000000, X, Y) && !ellipse(27976.496380, 26400.369400, 1378.850440, 1378.850440, 0.000000, X, Y) && !ellipse(26270.086042, 24227.261800, 1289.624037, 1289.624037, 0.000000, X, Y) && !ellipse(26264.162537, 24470.363678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.116000, 21406.086000, 1309.160038, 1309.160038, 0.000000, X, Y) && !ellipse(25253.712200, 22024.064600, 1285.272037, 1285.272037, 0.000000, X, Y) && !ellipse(23164.460000, 26987.526000, 1263.856036, 1263.856036, 0.000000, X, Y) && !ellipse(25309.174000, 25387.550000, 1108.096032, 1108.096032, 0.000000, X, Y) && !ellipse(27520.318000, 21279.668200, 1362.632039, 1362.632039, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48.gif
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Mean detx,y = (-2351.78, -575.27) 
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:31:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48.arf exists, delete to re-create
[Sun Jun 16 03:37:28 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:28 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 2044.00
[Sun Jun 16 03:37:28 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 4520.00
[Sun Jun 16 03:37:28 2013] Got source and background scale factors 1331200.000000, 4820800.000000
[Sun Jun 16 03:37:28 2013] User source parameters:
  Position = (296.8, 284.8) = 5 35 48.57 -69 17 37.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 795.9 +/- 46.2
  Background aperture counts = 1248.1
  Rate = 0.008 +/- 0.0005

[Sun Jun 16 03:37:28 2013] Updating counts from extracted products
[Sun Jun 16 03:37:28 2013] Set source signif. to 795.86/35.33 = 22.53
[Sun Jun 16 03:37:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:37 2013] Using photon index=1.80, rate=0.00784, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48.arf
[Sun Jun 16 03:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:37 2013] Updating source flux to 1e-13
[Sun Jun 16 03:38:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete