[Sat Jun 15 20:07:41 2013] Detection parameters: Position = (297.8, 297.9) = 5 35 47.77 -69 16 35.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 95.0 +/- 21.8 Background counts = 141.4 Rate = 0.001 +/- 0.0002 [Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 0.06' [Sat Jun 15 20:08:43 2013] Using EEF radius (= 6.46 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 6.46" [Sat Jun 15 20:08:43 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015 [Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 6.46" [Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src55.ximg exists [Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src55.csv [Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src55_1.ximg exists [Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src55.csv [Sat Jun 15 20:08:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Sat Jun 15 20:08:46 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Sat Jun 15 20:08:46 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly [Sat Jun 15 20:09:22 2013] Source 45 is offset by -6.119989 and -2.091776 pixels which is larger than 2 X fitted extent = 1.721430 x 1.721430, not incorporating fit results [Sat Jun 15 20:09:22 2013] Source 45 is offset by 5.352586 and 3.809257 pixels which is larger than 2 X fitted extent = 1.580755 x 3.889470, not incorporating fit results [Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:22 2013] Assessing source extent using major [Sat Jun 15 20:09:22 2013] Source does appear to be extended [Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:22 2013] Source is confused with source 46 [Sat Jun 15 20:10:12 2013] Using EEF radius (= 6.46 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 6.46" [Sat Jun 15 20:10:12 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015 [Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 6.46" [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src50.ximg exists [Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src50.csv [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src50_1.ximg exists [Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src50.csv [Sat Jun 15 20:10:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src50_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists [Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists [Sat Jun 15 20:10:14 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly [Sat Jun 15 20:10:53 2013] Spatial fit model total counts = 2891.200000, observed total counts = 2888.000000 [Sat Jun 15 20:10:53 2013] Offset between fit and detection position for source 45 = 8.408922 pixels [Sat Jun 15 20:10:53 2013] Warning, changing simple spatial fit ID from 50 to 30 [Sat Jun 15 20:10:53 2013] 2927.785000 total counts/ 2714.600000 bgd. counts: snr = 4.091699 Spatial fit parameters: Offset between fit and detection position for source 45 = 8.408922 pixels Position = (291.5, 292.4) = 5 35 52.98 -69 17 2.5 Extent = 13.9 (13.8-27.7)", rotation angle = 0 Source counts = 213.2 +/- 54.1 Background counts = 2714.6 Rate = 0.002 +/- 0.0005 [Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:10:53 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:10:53 2013] Source does appear to be extended [Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:31:39 2013] XMMSAS src. selection expression = ellipse(25309.174000, 25387.550000, 831.072024, 831.072024, 0.000000, X, Y) [Sun Jun 16 03:31:39 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_src.reg [Sun Jun 16 03:31:39 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (244, 245) - (339, 340) [Sun Jun 16 03:31:39 2013] XMMSAS bgd. selection expression = annulus(25309.174000, 25387.550000, 1385.120040, 2770.240080, X, Y) && !ellipse(27976.496380, 26400.369400, 1378.850440, 1378.850440, 0.000000, X, Y) && !ellipse(26270.086042, 24227.261800, 1289.624037, 1289.624037, 0.000000, X, Y) && !ellipse(26264.162537, 24470.363678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.776154, 24730.689301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.116000, 21406.086000, 1309.160038, 1309.160038, 0.000000, X, Y) && !ellipse(26794.618000, 29645.936000, 1490.424043, 1490.424043, 0.000000, X, Y) && !ellipse(25253.712200, 22024.064600, 1285.272037, 1285.272037, 0.000000, X, Y) && !ellipse(22135.937134, 27186.421478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21774.074000, 27114.289600, 1294.408037, 1294.408037, 0.000000, X, Y) && !ellipse(23164.460000, 26987.526000, 1263.856036, 1263.856036, 0.000000, X, Y) && !ellipse(27520.318000, 21279.668200, 1362.632039, 1362.632039, 0.000000, X, Y) [Sun Jun 16 03:31:39 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45.gif [Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create [Sun Jun 16 03:31:43 2013] Mean detx,y = (-2164.78, -1374.56) [Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create [Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create [Sun Jun 16 03:31:43 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_src_b10.pi.gz [Sun Jun 16 03:31:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_bgd.pi.gz [Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45.rmf exists, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45.arf exists, delete to re-create [Sun Jun 16 03:37:34 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:34 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 2268.00 [Sun Jun 16 03:37:34 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_bgd.pi.gz = 6652.00 [Sun Jun 16 03:37:34 2013] Got source and background scale factors 2173580.000000, 8850380.000000 [Sun Jun 16 03:37:34 2013] User source parameters: Position = (291.5, 292.4) = 5 35 52.98 -69 17 2.5 Extent = 13.9 (13.8-27.7)", rotation angle = 0 Source aperture counts = 634.3 +/- 48.6 Background aperture counts = 1633.7 Rate = 0.006 +/- 0.0005 [Sun Jun 16 03:37:38 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:37:38 2013] Using photon index=1.80, rate=0.0021, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45.arf [Sun Jun 16 03:37:38 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:37:38 2013] Updating source flux to 2.6e-14 [Sun Jun 16 03:38:15 2013] Flag b found in src. 45 procflags, skipping spectral fitting [Sun Jun 16 03:38:15 2013] Flag c found in src. 45 procflags, skipping spectral fitting [Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete