[Sat Jun 15 20:07:40 2013] Detection parameters:
  Position = (325.4, 336.7) = 5 35 25.20 -69 13 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.7 +/- 18.1
  Background counts = 110.2
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 3.40'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 8.13"
[Sat Jun 15 20:08:43 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.13"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src51.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src51.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src51.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat Jun 15 20:08:45 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat Jun 15 20:09:22 2013] Source 36 is offset by -7.058605 and 6.204082 pixels which is larger than
2 X fitted extent = 0.934097 x 0.934097, not incorporating fit results
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 8.13"
[Sat Jun 15 20:10:12 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 8.13"
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src47.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src47.csv
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src47.csv
[Sat Jun 15 20:10:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Jun 15 20:10:14 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sat Jun 15 20:10:53 2013] Spatial fit model total counts = 1162.810000, observed total counts = 1146.000000
[Sat Jun 15 20:10:53 2013] Offset between fit and detection position for source 36 = 0.317381 pixels
[Sat Jun 15 20:10:53 2013] 1148.116100 total counts/ 1090.130000 bgd. counts: snr = 1.756244
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.317381 pixels
  Position = (325.3, 337.0) = 5 35 25.32 -69 13 48.2
  Extent = 3.1 (2.4-4.4)", rotation angle = 0
  Source counts = 58.0 +/- 33.9
  Background counts = 1090.1
  Rate = 0.0006 +/- 0.0003
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:53 2013] Deleting source due to low Poisson probability 0.9