[Sat Jun 15 20:07:40 2013] Detection parameters:
  Position = (271.7, 348.3) = 5 36 9.08 -69 12 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 19.2
  Background counts = 123.2
  Rate = 0.001 +/- 0.0003

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 4.10'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Sat Jun 15 20:08:43 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 8.48"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src44.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src44.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src44_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src44.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat Jun 15 20:08:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:22 2013] Warning, spatial fit 44 centroid is now closest to src. 35
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Sat Jun 15 20:10:12 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 8.48"
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src41.csv
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src41.csv
[Sat Jun 15 20:10:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jun 15 20:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jun 15 20:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jun 15 20:10:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:53 2013] Spatial fit model total counts = 2015.900000, observed total counts = 1610.000000
[Sat Jun 15 20:10:53 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:39 2013] XMMSAS src. selection expression = ellipse(23593.025177, 30257.278809, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:39 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_src.reg
[Sun Jun 16 03:31:39 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (234, 311) - (309, 386)
[Sun Jun 16 03:31:39 2013] XMMSAS bgd. selection expression = annulus(23593.025177, 30257.278809, 1087.500000, 2175.000000, X, Y) && !ellipse(22911.439331, 30007.987488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26340.630000, 33875.584000, 1528.048044, 1528.048044, 0.000000, X, Y) && !ellipse(21062.539800, 31789.561600, 529.003215, 529.003215, 0.000000, X, Y) && !ellipse(27053.409600, 30039.487600, 1308.768038, 751.209622, 304.961000, X, Y) && !ellipse(26543.956000, 33602.128000, 1494.864043, 1494.864043, 0.000000, X, Y) && !ellipse(22695.476593, 30659.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21782.423965, 30318.009949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20594.590000, 32424.296000, 1595.528046, 1595.528046, 0.000000, X, Y) && !ellipse(26794.618000, 29645.936000, 1490.424043, 1490.424043, 0.000000, X, Y) && !ellipse(21774.074000, 27114.289600, 1294.408037, 1294.408037, 0.000000, X, Y) && !ellipse(20964.565200, 32935.484000, 901.928026, 901.928026, 0.000000, X, Y) && !ellipse(23164.460000, 26987.526000, 1263.856036, 1263.856036, 0.000000, X, Y)
[Sun Jun 16 03:31:39 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31.gif
[Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:43 2013] Mean detx,y = (136.34, -6054.12) 
[Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:43 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Jun 16 03:31:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] Not generating rmf since there are only 87 counts
[Sun Jun 16 03:31:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Sun Jun 16 03:37:32 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:32 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 1178.00
[Sun Jun 16 03:37:32 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 4638.00
[Sun Jun 16 03:37:32 2013] Got source and background scale factors 1285118.000000, 7228996.000000
[Sun Jun 16 03:37:32 2013] User source parameters:
  Position = (271.7, 348.3) = 5 36 9.08 -69 12 56.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 353.5 +/- 35.3
  Background aperture counts = 824.5
  Rate = 0.003 +/- 0.0003

[Sun Jun 16 03:37:32 2013] Updating counts from extracted products
[Sun Jun 16 03:37:32 2013] Set source signif. to 353.49/28.71 = 12.31
[Sun Jun 16 03:37:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:38 2013] Using photon index=1.80, rate=0.00348, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31.arf
[Sun Jun 16 03:37:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:38 2013] Updating source flux to 5.8e-14
[Sun Jun 16 03:38:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete