[Sat Jun 15 20:07:40 2013] Detection parameters:
  Position = (320.5, 368.6) = 5 35 29.23 -69 11 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.5 +/- 22.2
  Background counts = 89.5
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 5.33'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Sat Jun 15 20:08:43 2013] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.559
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.09"
[Sat Jun 15 20:08:43 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun 15 20:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src14.csv
[Sat Jun 15 20:08:43 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun 15 20:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src14.csv
[Sat Jun 15 20:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun 15 20:08:45 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jun 15 20:09:22 2013] Spatial fit model total counts = 1530.280000, observed total counts = 1464.000000
[Sat Jun 15 20:09:22 2013] Offset between fit and detection position for source 23 = 1.724551 pixels
[Sat Jun 15 20:09:22 2013] 1512.227000 total counts/ 1166.860000 bgd. counts: snr = 10.110473
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.724551 pixels
  Position = (318.9, 369.0) = 5 35 30.59 -69 11 28.9
  Extent = 18.1 (18.1-18.2)", rotation angle = 0
  Source counts = 345.4 +/- 38.9
  Background counts = 1166.9
  Rate = 0.003 +/- 0.0004
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:22 2013] Source is confused with source 21
[Sat Jun 15 20:10:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 18.15"
[Sat Jun 15 20:10:12 2013] source mask rpix=4.2, npix_max = 87, mask sum = 67, frac = 0.767
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 18.15"
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src14.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src14.csv
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src14.csv
[Sat Jun 15 20:10:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jun 15 20:10:13 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sat Jun 15 20:10:53 2013] Warning, spatial fit 14 centroid is now closest to src. 19
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:37 2013] XMMSAS src. selection expression = ellipse(27693.082600, 32057.638920, 1088.958031, 1088.958031, 0.000000, X, Y)
[Sun Jun 16 03:31:37 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_src.reg
[Sun Jun 16 03:31:37 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (256, 306) - (381, 432)
[Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(27693.082600, 32057.638920, 1814.930052, 3629.860104, X, Y) && !ellipse(26340.630000, 33875.584000, 1528.048044, 1528.048044, 0.000000, X, Y) && !ellipse(25763.412000, 34365.364000, 936.664027, 936.664027, 0.000000, X, Y) && !ellipse(23131.080000, 34425.431600, 1614.984046, 1614.984046, 0.000000, X, Y) && !ellipse(24869.255280, 34743.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.357400, 31565.772200, 324.743209, 324.743209, 0.000000, X, Y) && !ellipse(26822.807251, 32850.817627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.172000, 32761.037400, 814.136023, 814.136023, 0.000000, X, Y) && !ellipse(27053.409600, 30039.487600, 1308.768038, 751.209622, 304.961000, X, Y) && !ellipse(23514.014364, 35235.787765, 1528.048044, 907.046523, 74.348845, X, Y) && !ellipse(26543.956000, 33602.128000, 1494.864043, 1494.864043, 0.000000, X, Y) && !ellipse(26526.176000, 29387.660000, 643.986419, 643.986419, 0.000000, X, Y) && !ellipse(25300.272736, 34654.148041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25194.761871, 34110.743195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26794.618000, 29645.936000, 1490.424043, 1490.424043, 0.000000, X, Y) && !ellipse(23593.025177, 30257.278809, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23.gif
[Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:41 2013] Mean detx,y = (4274.89, -4345.97) 
[Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:41 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jun 16 03:31:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23.rmf exists, delete to re-create
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Sun Jun 16 03:37:22 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:22 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 2670.00
[Sun Jun 16 03:37:22 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 8086.00
[Sun Jun 16 03:37:22 2013] Got source and background scale factors 3412876.000000, 17304496.000000
[Sun Jun 16 03:37:22 2013] User source parameters:
  Position = (318.9, 369.0) = 5 35 30.59 -69 11 28.9
  Extent = 18.1 (18.1-18.2)", rotation angle = 0
  Source aperture counts = 1075.2 +/- 52.7
  Background aperture counts = 1594.8
  Rate = 0.01 +/- 0.0005

[Sun Jun 16 03:37:36 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:36 2013] Using photon index=1.80, rate=0.0034, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23.arf
[Sun Jun 16 03:37:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:36 2013] Updating source flux to 5.4e-14
[Sun Jun 16 03:38:15 2013] Flag c found in src. 23 procflags, skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete