[Sat Jun 15 20:07:39 2013] Detection parameters:
  Position = (213.1, 341.1) = 5 36 57.08 -69 13 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1026.1 +/- 40.5
  Background counts = 78.2
  Rate = 0.02 +/- 0.0008

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 6.92'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 9.89"
[Sat Jun 15 20:08:43 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.170
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.89"
[Sat Jun 15 20:08:43 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 15 20:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 20:08:43 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 15 20:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 20:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 15 20:08:44 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 15 20:09:22 2013] Spatial fit model total counts = 1680.000000, observed total counts = 1680.000000
[Sat Jun 15 20:09:22 2013] Offset between fit and detection position for source 2 = 0.087152 pixels
[Sat Jun 15 20:09:22 2013] 1679.462000 total counts/ 908.223000 bgd. counts: snr = 25.591323
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.087152 pixels
  Position = (213.0, 341.2) = 5 36 57.10 -69 13 29.2
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source counts = 771.2 +/- 41.0
  Background counts = 908.2
  Rate = 0.008 +/- 0.0004
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 6.27"
[Sat Jun 15 20:10:12 2013] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.060
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.27"
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src3.csv
[Sat Jun 15 20:10:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 15 20:10:13 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 15 20:10:53 2013] Spatial fit model total counts = 1678.460000, observed total counts = 1680.000000
[Sat Jun 15 20:10:53 2013] Offset between fit and detection position for source 2 = 0.000208 pixels
[Sat Jun 15 20:10:53 2013] 1677.903000 total counts/ 905.668000 bgd. counts: snr = 25.660491
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000208 pixels
  Position = (213.0, 341.2) = 5 36 57.10 -69 13 29.2
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source counts = 772.2 +/- 41.0
  Background counts = 905.7
  Rate = 0.008 +/- 0.0004
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:37 2013] XMMSAS src. selection expression = ellipse(18485.215000, 29636.605800, 378.214811, 378.214811, 0.000000, X, Y)
[Sun Jun 16 03:31:37 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 16 03:31:37 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (191, 319) - (235, 363)
[Sun Jun 16 03:31:37 2013] XMMSAS bgd. selection expression = annulus(18485.215000, 29636.605800, 630.358018, 1260.716036, X, Y) && !ellipse(16542.722321, 29881.331970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20594.590000, 32424.296000, 1595.528046, 1595.528046, 0.000000, X, Y)
[Sun Jun 16 03:31:37 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2.gif
[Sun Jun 16 03:31:40 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:41 2013] Mean detx,y = (-3721.49, -9350.86) 
[Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:41 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 16 03:31:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sun Jun 16 03:37:19 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:19 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 983.00
[Sun Jun 16 03:37:19 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1379.00
[Sun Jun 16 03:37:19 2013] Got source and background scale factors 451200.000000, 3636800.000000
[Sun Jun 16 03:37:19 2013] User source parameters:
  Position = (213.0, 341.2) = 5 36 57.10 -69 13 29.2
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source aperture counts = 811.9 +/- 32.4
  Background aperture counts = 171.1
  Rate = 0.008 +/- 0.0003

[Sun Jun 16 03:37:35 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:35 2013] Using photon index=1.80, rate=0.0076, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 16 03:37:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:35 2013] Updating source flux to 2.1e-13
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete