[Sat Jun 15 20:07:39 2013] Detection parameters: Position = (307.5, 384.1) = 5 35 39.90 -69 10 23.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 167.0 +/- 21.8 Background counts = 107.1 Rate = 0.003 +/- 0.0003 [Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 6.24' [Sat Jun 15 20:08:43 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 9.55" [Sat Jun 15 20:08:43 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.963 [Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.55" [Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src20.ximg exists [Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src20_1.ximg exists [Sat Jun 15 20:08:44 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src20 appears to have run properly [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Sat Jun 15 20:08:45 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly [Sat Jun 15 20:09:22 2013] Spatial fit model total counts = 1911.000000, observed total counts = 1840.000000 [Sat Jun 15 20:09:22 2013] Offset between fit and detection position for source 17 = 3.260059 pixels [Sat Jun 15 20:09:22 2013] Warning, changing simple spatial fit ID from 20 to 16 [Sat Jun 15 20:09:22 2013] 1722.232000 total counts/ 1319.670000 bgd. counts: snr = 11.081540 Spatial fit parameters: Offset between fit and detection position for source 17 = 3.260059 pixels Position = (305.7, 386.8) = 5 35 41.38 -69 10 11.8 Extent = 18.7 (18.6-37.4)", rotation angle = 0 Source counts = 402.6 +/- 41.5 Background counts = 1319.7 Rate = 0.004 +/- 0.0004 [Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:22 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:22 2013] Source does appear to be extended [Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:22 2013] Source is confused with source 16 [Sat Jun 15 20:10:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 18.69" [Sat Jun 15 20:10:12 2013] source mask rpix=4.3, npix_max = 91, mask sum = 78, frac = 0.848 [Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 18.69" [Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src20.ximg exists [Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src20.csv [Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src20_1.ximg exists [Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src20.csv [Sat Jun 15 20:10:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src20_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists [Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20.csv [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists [Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20.csv [Sat Jun 15 20:10:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:53 2013] Warning, spatial fit 20 centroid is now closest to src. 7 [Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:10:53 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:10:53 2013] Source does appear to be extended [Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(26543.956000, 33602.128000, 1121.148032, 1121.148032, 0.000000, X, Y) [Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_src.reg [Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (241, 322) - (370, 451) [Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(26543.956000, 33602.128000, 1868.580054, 3737.160108, X, Y) && !ellipse(22911.439331, 30007.987488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26340.630000, 33875.584000, 1528.048044, 1528.048044, 0.000000, X, Y) && !ellipse(25763.412000, 34365.364000, 936.664027, 936.664027, 0.000000, X, Y) && !ellipse(23131.080000, 34425.431600, 1614.984046, 1614.984046, 0.000000, X, Y) && !ellipse(24869.255280, 34743.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.082600, 32057.638920, 1451.944042, 1451.944042, 0.000000, X, Y) && !ellipse(26438.357400, 31565.772200, 324.743209, 324.743209, 0.000000, X, Y) && !ellipse(26822.807251, 32850.817627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.172000, 32761.037400, 814.136023, 814.136023, 0.000000, X, Y) && !ellipse(27053.409600, 30039.487600, 1308.768038, 751.209622, 304.961000, X, Y) && !ellipse(23514.014364, 35235.787765, 1528.048044, 907.046523, 74.348845, X, Y) && !ellipse(26526.176000, 29387.660000, 643.986419, 643.986419, 0.000000, X, Y) && !ellipse(25300.272736, 34654.148041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22695.476593, 30659.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25194.761871, 34110.743195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26794.618000, 29645.936000, 1490.424043, 1490.424043, 0.000000, X, Y) && !ellipse(23593.025177, 30257.278809, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17.gif [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create [Sun Jun 16 03:31:42 2013] Mean detx,y = (4610.67, -6034.98) [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create [Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_src_b10.pi.gz [Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.pi.gz [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17.rmf exists, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17.arf exists, delete to re-create [Sun Jun 16 03:37:24 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:24 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 2930.00 [Sun Jun 16 03:37:24 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 7522.00 [Sun Jun 16 03:37:24 2013] Got source and background scale factors 2877830.000000, 18211494.000000 [Sun Jun 16 03:37:24 2013] User source parameters: Position = (305.7, 386.8) = 5 35 41.38 -69 10 11.8 Extent = 18.7 (18.6-37.4)", rotation angle = 0 Source aperture counts = 1741.4 +/- 55.1 Background aperture counts = 1188.6 Rate = 0.02 +/- 0.0005 [Sun Jun 16 03:37:37 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:37:37 2013] Using photon index=1.80, rate=0.00396, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17.arf [Sun Jun 16 03:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:37:37 2013] Updating source flux to 7e-14 [Sun Jun 16 03:38:15 2013] Flag c found in src. 17 procflags, skipping spectral fitting [Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete