[Sat Jun 15 20:07:39 2013] Detection parameters:
  Position = (290.2, 392.6) = 5 35 54.02 -69 9 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.9 +/- 18.2
  Background counts = 120.6
  Rate = 0.001 +/- 0.0003

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 6.86'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Sat Jun 15 20:08:43 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.980
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 9.86"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src38.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src38.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src38.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sat Jun 15 20:08:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:22 2013] Source 14 is offset by -5.164967 and 1.952382 pixels which is larger than
2 X fitted extent = 1.164676 x 1.164676, not incorporating fit results
[Sat Jun 15 20:09:22 2013] Warning, spatial fit 38 centroid is now closest to src. 7
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:22 2013] Source is confused with source 7
[Sat Jun 15 20:09:22 2013] Source is confused with source 11
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Sat Jun 15 20:10:12 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.980
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 9.86"
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src36.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src36.csv
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src36_1.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src36.csv
[Sat Jun 15 20:10:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sat Jun 15 20:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sat Jun 15 20:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun 15 20:10:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:53 2013] Source 14 is offset by 4.918688 and 7.401232 pixels which is larger than
2 X fitted extent = 1.345779 x 1.345779, not incorporating fit results
[Sat Jun 15 20:10:53 2013] Warning, spatial fit 36 centroid is now closest to src. 7
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(25194.761871, 34110.743195, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_src.reg
[Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (253, 355) - (328, 430)
[Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(25194.761871, 34110.743195, 1087.500000, 2175.000000, X, Y) && !ellipse(26340.630000, 33875.584000, 1528.048044, 1528.048044, 0.000000, X, Y) && !ellipse(25763.412000, 34365.364000, 936.664027, 936.664027, 0.000000, X, Y) && !ellipse(23131.080000, 34425.431600, 1614.984046, 1614.984046, 0.000000, X, Y) && !ellipse(24869.255280, 34743.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.082600, 32057.638920, 1451.944042, 1451.944042, 0.000000, X, Y) && !ellipse(26822.807251, 32850.817627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.172000, 32761.037400, 814.136023, 814.136023, 0.000000, X, Y) && !ellipse(23514.014364, 35235.787765, 1528.048044, 907.046523, 74.348845, X, Y) && !ellipse(26543.956000, 33602.128000, 1494.864043, 1494.864043, 0.000000, X, Y) && !ellipse(25300.272736, 34654.148041, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14.gif
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Mean detx,y = (4206.46, -7515.64) 
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] Not generating rmf since there are only 79 counts
[Sun Jun 16 03:31:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14.arf exists, delete to re-create
[Sun Jun 16 03:37:30 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:30 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 1287.00
[Sun Jun 16 03:37:30 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 1336.00
[Sun Jun 16 03:37:30 2013] Got source and background scale factors 1191480.000000, 2988932.000000
[Sun Jun 16 03:37:30 2013] User source parameters:
  Position = (290.2, 392.6) = 5 35 54.02 -69 9 46.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 754.4 +/- 36.9
  Background aperture counts = 532.6
  Rate = 0.007 +/- 0.0004

[Sun Jun 16 03:37:30 2013] Updating counts from extracted products
[Sun Jun 16 03:37:30 2013] Set source signif. to 754.43/23.08 = 32.69
[Sun Jun 16 03:37:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:38 2013] Using photon index=1.80, rate=0.00743, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14.arf
[Sun Jun 16 03:37:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:38 2013] Updating source flux to 1.5e-13
[Sun Jun 16 03:38:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete