[Sat Jun 15 20:07:39 2013] Detection parameters:
  Position = (457.1, 395.1) = 5 33 37.98 -69 9 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.7 +/- 20.6
  Background counts = 62.1
  Rate = 0.002 +/- 0.0002

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 13.47'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 13.16"
[Sat Jun 15 20:08:43 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 13.16"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src27.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src27.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jun 15 20:08:45 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jun 15 20:09:22 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.469809 pixels away
[Sat Jun 15 20:09:22 2013] Source 13 is offset by 2.548422 and -8.259492 pixels which is larger than
2 X fitted extent = 1.614506 x 1.614506, not incorporating fit results
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 13.16"
[Sat Jun 15 20:10:12 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 13.16"
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src27.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src27.csv
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src27.csv
[Sat Jun 15 20:10:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Jun 15 20:10:14 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sat Jun 15 20:10:53 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 17.413850 pixels away
[Sat Jun 15 20:10:53 2013] Source 13 is offset by 2.583296 and -8.377055 pixels which is larger than
2 X fitted extent = 1.545914 x 1.545914, not incorporating fit results
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(39715.042755, 34328.920227, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (420, 358) - (495, 433)
[Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(39715.042755, 34328.920227, 1087.500000, 2175.000000, X, Y) && !ellipse(38482.142731, 36054.089233, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13.gif
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Mean detx,y = (14125.24, 3027.06) 
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:31:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Sun Jun 16 03:37:27 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:27 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 607.00
[Sun Jun 16 03:37:27 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 3191.00
[Sun Jun 16 03:37:27 2013] Got source and background scale factors 1282948.000000, 9786756.000000
[Sun Jun 16 03:37:27 2013] User source parameters:
  Position = (457.1, 395.1) = 5 33 37.98 -69 9 31.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 188.7 +/- 25.7
  Background aperture counts = 418.3
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 03:37:27 2013] Updating counts from extracted products
[Sun Jun 16 03:37:27 2013] Set source signif. to 188.69/20.45 = 9.23
[Sun Jun 16 03:37:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:37 2013] Using photon index=1.80, rate=0.00186, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13.arf
[Sun Jun 16 03:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:37 2013] Updating source flux to 5.1e-14
[Sun Jun 16 03:38:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete