[Sat Jun 15 20:07:39 2013] Detection parameters: Position = (270.3, 403.8) = 5 36 10.22 -69 8 54.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 137.8 +/- 21.3 Background counts = 119.0 Rate = 0.003 +/- 0.0004 [Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 7.90' [Sat Jun 15 20:08:43 2013] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 10.38" [Sat Jun 15 20:08:43 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.080 [Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.38" [Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src19.ximg exists [Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src19_1.ximg exists [Sat Jun 15 20:08:44 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src19 appears to have run properly [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Sat Jun 15 20:08:45 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Sat Jun 15 20:09:22 2013] Source 10 is offset by -8.014756 and -1.527512 pixels which is larger than 2 X fitted extent = 1.160193 x 1.160193, not incorporating fit results [Sat Jun 15 20:09:22 2013] Spatial fit model total counts = 1763.020000, observed total counts = 1770.000000 [Sat Jun 15 20:09:22 2013] Offset between fit and detection position for source 10 = 1.899029 pixels [Sat Jun 15 20:09:22 2013] 1466.538000 total counts/ 1129.060000 bgd. counts: snr = 10.043543 Spatial fit parameters: Offset between fit and detection position for source 10 = 1.899029 pixels Position = (270.8, 405.6) = 5 36 9.76 -69 8 50.0 Extent = 19.1" x 11.3", rotation angle = 74 Source counts = 337.5 +/- 38.3 Background counts = 1129.1 Rate = 0.003 +/- 0.0004 [Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:22 2013] Assessing source extent using major [Sat Jun 15 20:09:22 2013] Source does appear to be extended [Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.68 [Sat Jun 15 20:09:22 2013] Source is asymmetric [Sat Jun 15 20:09:22 2013] Source is confused with source 15 [Sat Jun 15 20:10:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 15.22" [Sat Jun 15 20:10:12 2013] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.001 [Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 15.22" [Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src19.ximg exists [Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src19.csv [Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src19_1.ximg exists [Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src19.csv [Sat Jun 15 20:10:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sat Jun 15 20:10:13 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly [Sat Jun 15 20:10:53 2013] Warning, spatial fit 19 centroid is now closest to src. 12 [Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:10:53 2013] Assessing source extent using major [Sat Jun 15 20:10:53 2013] Source does appear to be extended [Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.68 [Sat Jun 15 20:10:53 2013] Source is asymmetric [Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(23514.014364, 35235.787765, 1146.036033, 680.284892, 74.348845, X, Y) [Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_src.reg [Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (205, 340) - (337, 471) [Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(23514.014364, 35235.787765, 1910.060055, 3820.120110, X, Y) && !ellipse(26340.630000, 33875.584000, 1528.048044, 1528.048044, 0.000000, X, Y) && !ellipse(25763.412000, 34365.364000, 936.664027, 936.664027, 0.000000, X, Y) && !ellipse(21062.539800, 31789.561600, 529.003215, 529.003215, 0.000000, X, Y) && !ellipse(23131.080000, 34425.431600, 1614.984046, 1614.984046, 0.000000, X, Y) && !ellipse(24869.255280, 34743.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.082600, 32057.638920, 1451.944042, 1451.944042, 0.000000, X, Y) && !ellipse(26438.357400, 31565.772200, 324.743209, 324.743209, 0.000000, X, Y) && !ellipse(26822.807251, 32850.817627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.172000, 32761.037400, 814.136023, 814.136023, 0.000000, X, Y) && !ellipse(26543.956000, 33602.128000, 1494.864043, 1494.864043, 0.000000, X, Y) && !ellipse(25300.272736, 34654.148041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22695.476593, 30659.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20290.634800, 31904.862400, 759.911222, 759.911222, 0.000000, X, Y) && !ellipse(25194.761871, 34110.743195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20594.590000, 32424.296000, 1595.528046, 1595.528046, 0.000000, X, Y) && !ellipse(20964.565200, 32935.484000, 901.928026, 901.928026, 0.000000, X, Y) [Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10.gif [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create [Sun Jun 16 03:31:42 2013] Mean detx,y = (3577.08, -9338.15) [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create [Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.pi.gz [Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10.rmf exists, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10.arf exists, delete to re-create [Sun Jun 16 03:37:24 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:24 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 1994.00 [Sun Jun 16 03:37:24 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 9528.00 [Sun Jun 16 03:37:24 2013] Got source and background scale factors 2448592.000000, 22973212.000000 [Sun Jun 16 03:37:24 2013] User source parameters: Position = (270.8, 405.6) = 5 36 9.76 -69 8 50.0 Extent = 19.1" x 11.3", rotation angle = 74 Source aperture counts = 978.5 +/- 45.7 Background aperture counts = 1015.5 Rate = 0.01 +/- 0.0004 [Sun Jun 16 03:37:37 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:37:37 2013] Using photon index=1.80, rate=0.00332, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10.arf [Sun Jun 16 03:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:37:37 2013] Updating source flux to 7.6e-14 [Sun Jun 16 03:38:15 2013] Flag b found in src. 10 procflags, skipping spectral fitting [Sun Jun 16 03:38:15 2013] Flag c found in src. 10 procflags, skipping spectral fitting [Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete