[Tue Mar 20 08:34:58 2012] Detection parameters:
  Position = (274.3, 295.9) = 12 30 47.27 41 36 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.6 +/- 27.0
  Background counts = 242.5
  Rate = 0.007 +/- 0.0009

[Tue Mar 20 08:35:00 2012] Off-axis axis estimate = 1.76'
[Tue Mar 20 08:40:46 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 08:40:46 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Mar 20 08:40:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Tue Mar 20 08:40:46 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.31"
[Tue Mar 20 09:25:33 2012] fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_src6.ximg exists
[Tue Mar 20 09:25:33 2012] fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Mar 20 09:25:33 2012] Fit fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_src6 appears to have run properly
[Tue Mar 20 09:25:33 2012] fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Mar 20 09:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 20 09:25:33 2012] fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Mar 20 09:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 20 09:25:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 10:39:12 2012] Spatial fit model total counts = 1293.150000, observed total counts = 1171.000000
[Tue Mar 20 10:39:12 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 10:39:12 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 10:39:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 10:39:12 2012] Assessing source extent using major
[Tue Mar 20 10:39:12 2012] Source does appear to be extended
[Tue Mar 20 10:39:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 10:39:35 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 10:39:35 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Mar 20 10:39:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Tue Mar 20 10:39:35 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.31"
[Tue Mar 20 11:47:33 2012] fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_src6.ximg exists
[Tue Mar 20 11:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_src6.csv
[Tue Mar 20 11:47:33 2012] fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Mar 20 11:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_src6.csv
[Tue Mar 20 11:47:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 11:47:33 2012] fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Mar 20 11:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Mar 20 11:47:33 2012] fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Mar 20 11:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Mar 20 11:47:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 13:04:31 2012] Source 6 is offset by -6.442747 and -6.774417 pixels which is larger than
2 X fitted extent = 1.380775 x 1.380775, not incorporating fit results
[Tue Mar 20 13:04:31 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 13:04:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 13:04:31 2012] Assessing source extent using major
[Tue Mar 20 13:04:31 2012] Source does appear to be extended
[Tue Mar 20 13:04:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 13:04:45 2012] XMMSAS src. selection expression = ellipse(23813.458984, 25698.383759, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 20 13:04:45 2012] Writing source region out to fullrun_pn_xmm0556300201_pi300-10000_pass1_cl_src6_src.reg
[Tue Mar 20 13:04:45 2012] Extracting stamp from image fullrun_pn_xmm0556300201_pi300-10000_cl_sm2.00.img.gz, (237, 258) - (312, 333)
[Tue Mar 20 13:04:45 2012] XMMSAS bgd. selection expression = annulus(23813.458984, 25698.383759, 1087.500000, 2175.000000, X, Y) && !ellipse(26272.580400, 27865.679460, 500.742414, 500.742414, 0.000000, X, Y) && !ellipse(24716.130000, 27449.262600, 403.520812, 403.520812, 0.000000, X, Y) && !ellipse(25374.202000, 27293.796000, 1091.328031, 187.412005, 0.000000, X, Y) && !ellipse(25705.262939, 26837.062103, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 13:04:45 2012] Writing fullrun_pn_xmm0556300201_pi300-10000_pass1_cl_src6.gif
[Tue Mar 20 13:14:58 2012] Mean detx,y = (-3065.91, 893.77) 
[Tue Mar 20 13:15:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 13:15:39 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 13:15:39 2012] Setting source spectrum file to fullrun_pn_xmm0556300201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 20 13:15:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556300201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Mar 20 14:31:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 20 14:31:51 2012] rmf not generated due to insufficient counts
[Tue Mar 20 15:56:25 2012] Updating aperture counts using extracted products
[Tue Mar 20 15:56:25 2012] Error reading totcts from fullrun_pn_xmm0556300201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 20 15:56:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 15:56:27 2012] Using photon index=1.80, rate=0.00705, arf fullrun_pn_xmm0556300201_pi300-10000_pass1_cl_src6.arf
[Tue Mar 20 15:56:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 15:56:27 2012] Updating source flux to 2.3e-14
[Tue Mar 20 15:58:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting