[Tue Mar 20 08:35:05 2012] Detection parameters:
  Position = (290.5, 247.1) = 12 30 40.99 41 33 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.7 +/- 22.3
  Background counts = 187.0
  Rate = 0.004 +/- 0.0006

[Tue Mar 20 08:35:06 2012] Off-axis axis estimate = 3.77'
[Tue Mar 20 09:53:47 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 09:53:47 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Mar 20 09:53:47 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.075
[Tue Mar 20 09:53:47 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.31"
[Tue Mar 20 10:39:04 2012] fullrun_mos2_xmm0556300201_pi300-10000_cl_pass0_src12.ximg exists
[Tue Mar 20 10:39:04 2012] fullrun_mos2_xmm0556300201_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Mar 20 10:39:04 2012] Fit fullrun_mos2_xmm0556300201_pi300-10000_cl_pass0_src12 appears to have run properly
[Tue Mar 20 10:39:04 2012] fullrun_mos2_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Mar 20 10:39:04 2012] fullrun_mos2_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Mar 20 10:39:04 2012] Fit fullrun_mos2_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Mar 20 10:39:22 2012] Source 10 is offset by 6.595616 and 4.731106 pixels which is larger than
2 X fitted extent = 2.079333 x 2.079333, not incorporating fit results
[Tue Mar 20 10:39:22 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 10:39:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 10:39:22 2012] Assessing source extent using major
[Tue Mar 20 10:39:22 2012] Source does appear to be extended
[Tue Mar 20 10:39:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 12:13:05 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 12:13:05 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Mar 20 12:13:05 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.075
[Tue Mar 20 12:13:05 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.31"
[Tue Mar 20 13:04:24 2012] fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_src10.ximg exists
[Tue Mar 20 13:04:24 2012] fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Mar 20 13:04:24 2012] Fit fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Mar 20 13:04:24 2012] fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Mar 20 13:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Mar 20 13:04:24 2012] fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Mar 20 13:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Mar 20 13:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 13:04:35 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.157275 pixels away
[Tue Mar 20 13:04:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 13:04:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 13:04:35 2012] Assessing source extent using major
[Tue Mar 20 13:04:35 2012] Source does appear to be extended
[Tue Mar 20 13:04:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:22:55 2012] XMMSAS src. selection expression = ellipse(25221.062592, 21450.030228, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 20 15:22:55 2012] Writing source region out to fullrun_mos2_xmm0556300201_pi300-10000_pass1_cl_src10_src.reg
[Tue Mar 20 15:22:55 2012] Extracting stamp from image fullrun_mos2_xmm0556300201_pi300-10000_cl_sm2.00.img.gz, (253, 210) - (328, 285)
[Tue Mar 20 15:22:55 2012] XMMSAS bgd. selection expression = annulus(25221.062592, 21450.030228, 1087.500000, 2175.000000, X, Y)
[Tue Mar 20 15:22:55 2012] Writing fullrun_mos2_xmm0556300201_pi300-10000_pass1_cl_src10.gif
[Tue Mar 20 15:36:46 2012] Mean detx,y = (3455.49, -5538.30) 
[Tue Mar 20 15:36:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 15:37:26 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 15:37:26 2012] Setting source spectrum file to fullrun_mos2_xmm0556300201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 20 15:37:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556300201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Mar 20 15:54:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 20 15:54:10 2012] rmf not generated due to insufficient counts
[Tue Mar 20 15:56:31 2012] Updating aperture counts using extracted products
[Tue Mar 20 15:56:31 2012] Error reading totcts from fullrun_mos2_xmm0556300201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 20 15:56:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 15:56:31 2012] Using photon index=1.80, rate=0.00372, arf fullrun_mos2_xmm0556300201_pi300-10000_pass1_cl_src10.arf
[Tue Mar 20 15:56:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 15:56:32 2012] Updating source flux to 5e-14
[Tue Mar 20 15:57:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting