[Tue Mar 20 08:35:02 2012] Detection parameters:
  Position = (296.7, 308.5) = 12 30 38.57 41 37 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.0 +/- 26.4
  Background counts = 236.5
  Rate = 0.004 +/- 0.0006

[Tue Mar 20 08:35:03 2012] Off-axis axis estimate = 0.74'
[Tue Mar 20 09:25:33 2012] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 09:25:33 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Tue Mar 20 09:25:33 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.175
[Tue Mar 20 09:25:33 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.80"
[Tue Mar 20 09:53:47 2012] fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_src11.ximg exists
[Tue Mar 20 09:53:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_src11.csv
[Tue Mar 20 09:53:47 2012] fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Mar 20 09:53:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_src11.csv
[Tue Mar 20 09:53:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 09:53:47 2012] fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Mar 20 09:53:47 2012] fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Mar 20 09:53:47 2012] Fit fullrun_mos1_xmm0556300201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Mar 20 10:39:17 2012] Source 10 is offset by 1.554140 and -5.841685 pixels which is larger than
2 X fitted extent = 1.532768 x 1.532768, not incorporating fit results
[Tue Mar 20 10:39:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 10:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 10:39:17 2012] Assessing source extent using major
[Tue Mar 20 10:39:17 2012] Source does appear to be extended
[Tue Mar 20 10:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 11:47:34 2012] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 11:47:34 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Tue Mar 20 11:47:34 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.175
[Tue Mar 20 11:47:34 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.80"
[Tue Mar 20 12:13:05 2012] fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_src9.ximg exists
[Tue Mar 20 12:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_src9.csv
[Tue Mar 20 12:13:05 2012] fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Mar 20 12:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_src9.csv
[Tue Mar 20 12:13:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 12:13:05 2012] fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Mar 20 12:13:05 2012] fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Mar 20 12:13:05 2012] Fit fullrun_mos1_xmm0556300201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Mar 20 13:04:33 2012] Source 10 is offset by 1.555694 and -5.859501 pixels which is larger than
2 X fitted extent = 1.619090 x 1.619090, not incorporating fit results
[Tue Mar 20 13:04:33 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 13:04:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 13:04:33 2012] Assessing source extent using major
[Tue Mar 20 13:04:33 2012] Source does appear to be extended
[Tue Mar 20 13:04:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 14:52:24 2012] XMMSAS src. selection expression = ellipse(25764.156799, 26794.629425, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 20 14:52:24 2012] Writing source region out to fullrun_mos1_xmm0556300201_pi300-10000_pass1_cl_src10_src.reg
[Tue Mar 20 14:52:24 2012] Extracting stamp from image fullrun_mos1_xmm0556300201_pi300-10000_cl_sm2.00.img.gz, (259, 271) - (334, 346)
[Tue Mar 20 14:52:24 2012] XMMSAS bgd. selection expression = annulus(25764.156799, 26794.629425, 1087.500000, 2175.000000, X, Y) && !ellipse(26253.634000, 27837.340000, 439.390413, 439.390413, 0.000000, X, Y) && !ellipse(27196.638031, 28633.667328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24691.007400, 27451.494200, 409.518412, 409.518412, 0.000000, X, Y)
[Tue Mar 20 14:52:24 2012] Writing fullrun_mos1_xmm0556300201_pi300-10000_pass1_cl_src10.gif
[Tue Mar 20 15:04:50 2012] Mean detx,y = (-450.67, -1179.51) 
[Tue Mar 20 15:04:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 15:05:09 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 15:05:10 2012] Setting source spectrum file to fullrun_mos1_xmm0556300201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 20 15:05:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556300201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Mar 20 15:22:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 20 15:22:30 2012] rmf not generated due to insufficient counts
[Tue Mar 20 15:56:28 2012] Updating aperture counts using extracted products
[Tue Mar 20 15:56:29 2012] Error reading totcts from fullrun_mos1_xmm0556300201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 20 15:56:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 15:56:29 2012] Using photon index=1.80, rate=0.00367, arf fullrun_mos1_xmm0556300201_pi300-10000_pass1_cl_src10.arf
[Tue Mar 20 15:56:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 15:56:29 2012] Updating source flux to 3.7e-14
[Tue Mar 20 15:56:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting