[Sun Dec 25 17:14:18 2011] Detection parameters:
  Position = (276.3, 314.5) = 12 30 42.99 41 38 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 811.2 +/- 40.0
  Background counts = 142.8
  Rate = 0.04 +/- 0.002

[Sun Dec 25 17:14:25 2011] Off-axis axis estimate = 1.98'
[Sun Dec 25 17:15:05 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 17:15:05 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Sun Dec 25 17:15:05 2011] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.771
[Sun Dec 25 17:15:05 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.42"
[Sun Dec 25 17:15:05 2011] fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 25 17:15:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 17:15:05 2011] fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 25 17:15:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 17:15:05 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 17:15:06 2011] fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 25 17:15:06 2011] fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 25 17:15:06 2011] Fit fullrun_pn_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 25 17:15:25 2011] Source 3 is offset by 7.133072 and 6.274247 pixels which is larger than
2 X fitted extent = 6.821793 x 6.821793, not incorporating fit results
[Sun Dec 25 17:15:25 2011] Spatial fit model total counts = 1879.350000, observed total counts = 1880.000000
[Sun Dec 25 17:15:25 2011] Offset between fit and detection position for source 3 = 1.821058 pixels
[Sun Dec 25 17:15:25 2011] Warning, changing simple spatial fit ID from 3 to 8
[Sun Dec 25 17:15:25 2011] 1829.735000 total counts/ 1342.250000 bgd. counts: snr = 13.305909
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.821058 pixels
  Position = (277.9, 315.3) = 12 30 42.38 41 38 12.3
  Extent = 14.5 (14.0-29.0)" x 5.0 (4.3-5.6)", rotation angle = 355 (350-358) degrees
  Source counts = 487.5 +/- 42.8
  Background counts = 1342.2
  Rate = 0.02 +/- 0.002
[Sun Dec 25 17:15:25 2011] Spatial fit model total counts = 1024.020000, observed total counts = 1023.000000
[Sun Dec 25 17:15:25 2011] Offset between fit and detection position for source 3 = 1.311860 pixels
[Sun Dec 25 17:15:25 2011] Warning, changing simple spatial fit ID from 8 to 26
[Sun Dec 25 17:15:25 2011] 898.011000 total counts/ 658.103000 bgd. counts: snr = 9.351856
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.311860 pixels
  Position = (276.6, 315.2) = 12 30 42.88 41 38 11.6
  Extent = 4.1 (3.6-4.6)", rotation angle = 0
  Source counts = 239.9 +/- 30.0
  Background counts = 658.1
  Rate = 0.01 +/- 0.001
[Sun Dec 25 17:15:25 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 17:15:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 17:15:25 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 17:15:25 2011] Source does appear to be extended
[Sun Dec 25 17:15:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 17:15:25 2011] Source is confused with source 8
[Sun Dec 25 17:15:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 17:15:56 2011] Initial guess for spatial extent in simple fitting = 4.05"
[Sun Dec 25 17:15:56 2011] source mask rpix=0.9, npix_max = 8, mask sum = 3, frac = 0.366
[Sun Dec 25 17:15:56 2011] Skipping simple spatial due to low active detector fraction
[Sun Dec 25 17:16:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 17:16:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 17:16:15 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 17:16:15 2011] Source does appear to be extended
[Sun Dec 25 17:16:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 17:16:40 2011] XMMSAS src. selection expression = ellipse(24015.406000, 27372.138000, 243.297607, 243.297607, 0.000000, X, Y)
[Sun Dec 25 17:16:40 2011] Not overwriting source region fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 25 17:16:40 2011] Extracting stamp from image fullrun_pn_xmm0556300101_pi300-10000_cl_sm2.00.img.gz, (263, 301) - (291, 329)
[Sun Dec 25 17:16:40 2011] XMMSAS bgd. selection expression = annulus(24015.406000, 27372.138000, 405.496012, 810.992023, X, Y) && !ellipse(24643.832000, 27379.472000, 959.216028, 305.480009, 10.114000, X, Y) && !ellipse(24257.117035, 28242.448761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24996.853333, 26822.244385, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 25 17:16:40 2011] Writing fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3.gif
[Sun Dec 25 17:16:41 2011] ../../xmm0556300101/products/events/fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0556300101/products/events/fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Dec 25 17:16:41 2011] Mean detx,y = (-1416.60, -875.33) 
[Sun Dec 25 17:16:41 2011] ../../xmm0556300101/products/images/fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0556300101/products/images/fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Dec 25 17:16:41 2011] ../../xmm0556300101/products/spectra/fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0556300101/products/spectra/fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Dec 25 17:16:41 2011] Setting source spectrum file to fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 25 17:16:41 2011] Setting bgd. spectrum file to fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 25 17:16:41 2011] ../../xmm0556300101/products/lightcurves/fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0556300101/products/lightcurves/fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Dec 25 17:17:00 2011] fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Sun Dec 25 17:17:00 2011] fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Sun Dec 25 17:18:56 2011] Updating aperture counts using extracted products
[Sun Dec 25 17:18:56 2011] Error reading totcts from fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 25 17:18:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 17:18:59 2011] Using photon index=1.80, rate=0.0111, arf fullrun_pn_xmm0556300101_pi300-10000_pass1_cl_src3.arf
[Sun Dec 25 17:18:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 17:18:59 2011] Updating source flux to 7.7e-14
[Sun Dec 25 17:19:11 2011] Flag b found in src. 3 procflags, skipping spectral fitting
[Sun Dec 25 17:19:11 2011] Flag c found in src. 3 procflags, skipping spectral fitting