[Sun Dec 25 17:14:28 2011] Detection parameters:
  Position = (375.8, 464.5) = 12 30 4.31 41 49 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.9 +/- 12.3
  Background counts = 25.4
  Rate = 0.002 +/- 0.0004

[Sun Dec 25 17:14:31 2011] Off-axis axis estimate = 13.28'
[Sun Dec 25 17:15:07 2011] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 17:15:07 2011] Initial guess for spatial extent in simple fitting = 13.07"
[Sun Dec 25 17:15:07 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Sun Dec 25 17:15:07 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 13.07"
[Sun Dec 25 17:15:09 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Dec 25 17:15:09 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src25.csv
[Sun Dec 25 17:15:09 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Dec 25 17:15:09 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src25.csv
[Sun Dec 25 17:15:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 17:15:09 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Dec 25 17:15:09 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Dec 25 17:15:09 2011] Fit fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Dec 25 17:15:37 2011] Warning, spatial fit 25 centroid is now closest to src. 10
[Sun Dec 25 17:15:37 2011] Spatial fit model total counts = 297.838000, observed total counts = 297.000000
[Sun Dec 25 17:15:37 2011] Offset between fit and detection position for source 9 = 0.486226 pixels
[Sun Dec 25 17:15:37 2011] Warning, changing simple spatial fit ID from 25 to 26
[Sun Dec 25 17:15:37 2011] 302.779100 total counts/ 274.491000 bgd. counts: snr = 1.707417
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.486226 pixels
  Position = (375.3, 464.5) = 12 30 4.50 41 49 0.8
  Extent = 4.5 (3.2-8.1)", rotation angle = 0
  Source counts = 28.3 +/- 17.4
  Background counts = 274.5
  Rate = 0.0009 +/- 0.0005
  Deleting source due to low Poisson probability