[Sun Dec 25 17:14:31 2011] Detection parameters:
  Position = (282.1, 248.2) = 12 30 40.75 41 33 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.0 +/- 12.8
  Background counts = 29.4
  Rate = 0.002 +/- 0.0005

[Sun Dec 25 17:14:31 2011] Off-axis axis estimate = 3.83'
[Sun Dec 25 17:15:07 2011] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 17:15:07 2011] Initial guess for spatial extent in simple fitting = 8.34"
[Sun Dec 25 17:15:07 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Sun Dec 25 17:15:07 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 8.34"
[Sun Dec 25 17:15:08 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src16.ximg exists
[Sun Dec 25 17:15:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src16.csv
[Sun Dec 25 17:15:08 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Dec 25 17:15:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src16.csv
[Sun Dec 25 17:15:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 17:15:09 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Dec 25 17:15:09 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Dec 25 17:15:09 2011] Fit fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Dec 25 17:15:37 2011] Source 26 is offset by -1.066733 and -8.038502 pixels which is larger than
2 X fitted extent = 1.565434 x 1.565434, not incorporating fit results
[Sun Dec 25 17:15:37 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 17:15:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 17:15:37 2011] Assessing source extent using major
[Sun Dec 25 17:15:37 2011] Source does appear to be extended
[Sun Dec 25 17:15:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 17:15:59 2011] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 17:15:59 2011] Initial guess for spatial extent in simple fitting = 8.34"
[Sun Dec 25 17:15:59 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Sun Dec 25 17:15:59 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 8.34"
[Sun Dec 25 17:16:00 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src15.ximg exists
[Sun Dec 25 17:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src15.csv
[Sun Dec 25 17:16:00 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Dec 25 17:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src15.csv
[Sun Dec 25 17:16:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 17:16:00 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Dec 25 17:16:00 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Dec 25 17:16:01 2011] Fit fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Dec 25 17:16:23 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 52.766132 pixels away
[Sun Dec 25 17:16:23 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.113369 pixels away
[Sun Dec 25 17:16:23 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 17:16:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 17:16:23 2011] Assessing source extent using major
[Sun Dec 25 17:16:23 2011] Source does appear to be extended
[Sun Dec 25 17:16:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 17:17:02 2011] XMMSAS src. selection expression = ellipse(24490.762268, 21545.518356, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 25 17:17:02 2011] Not overwriting source region fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_src.reg
[Sun Dec 25 17:17:02 2011] Extracting stamp from image fullrun_mos2_xmm0556300101_pi300-10000_cl_sm2.00.img.gz, (245, 211) - (320, 286)
[Sun Dec 25 17:17:02 2011] XMMSAS bgd. selection expression = annulus(24490.762268, 21545.518356, 1087.500000, 2175.000000, X, Y)
[Sun Dec 25 17:17:02 2011] Writing fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26.gif
[Sun Dec 25 17:17:03 2011] ../../xmm0556300101/products/events/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0556300101/products/events/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Sun Dec 25 17:17:03 2011] Mean detx,y = (5255.48, -3810.79) 
[Sun Dec 25 17:17:03 2011] ../../xmm0556300101/products/images/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0556300101/products/images/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Sun Dec 25 17:17:03 2011] ../../xmm0556300101/products/spectra/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0556300101/products/spectra/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Sun Dec 25 17:17:03 2011] Setting source spectrum file to fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Dec 25 17:17:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Dec 25 17:17:03 2011] ../../xmm0556300101/products/lightcurves/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0556300101/products/lightcurves/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Sun Dec 25 17:17:11 2011] Not generating rmf since there are only 66 counts
[Sun Dec 25 17:17:11 2011] rmf not generated due to insufficient counts
[Sun Dec 25 17:17:11 2011] fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Sun Dec 25 17:19:03 2011] Updating aperture counts using extracted products
[Sun Dec 25 17:19:03 2011] Error reading totcts from fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Dec 25 17:19:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 17:19:05 2011] Using photon index=1.80, rate=0.00247, arf fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src26.arf
[Sun Dec 25 17:19:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 17:19:05 2011] Updating source flux to 3.4e-14
[Sun Dec 25 17:19:10 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting