[Sun Dec 25 17:14:29 2011] Detection parameters:
  Position = (209.8, 211.2) = 12 31 8.72 41 30 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.5 +/- 13.4
  Background counts = 23.0
  Rate = 0.003 +/- 0.0004

[Sun Dec 25 17:14:31 2011] Off-axis axis estimate = 9.01'
[Sun Dec 25 17:15:07 2011] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 17:15:07 2011] Initial guess for spatial extent in simple fitting = 10.93"
[Sun Dec 25 17:15:07 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Sun Dec 25 17:15:07 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 10.93"
[Sun Dec 25 17:15:08 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src15.ximg exists
[Sun Dec 25 17:15:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src15.csv
[Sun Dec 25 17:15:08 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Dec 25 17:15:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src15.csv
[Sun Dec 25 17:15:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 17:15:09 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Dec 25 17:15:09 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Dec 25 17:15:09 2011] Fit fullrun_mos2_xmm0556300101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Dec 25 17:15:37 2011] Spatial fit model total counts = 251.783000, observed total counts = 252.000000
[Sun Dec 25 17:15:37 2011] Offset between fit and detection position for source 20 = 0.266648 pixels
[Sun Dec 25 17:15:37 2011] 251.102000 total counts/ 209.298000 bgd. counts: snr = 2.889584
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.266648 pixels
  Position = (209.9, 211.5) = 12 31 8.71 41 30 40.3
  Extent = 4.0 (3.0-7.7)", rotation angle = 0
  Source counts = 41.8 +/- 15.8
  Background counts = 209.3
  Rate = 0.001 +/- 0.0005
[Sun Dec 25 17:15:37 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 17:15:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 17:15:37 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 17:15:37 2011] Source does appear to be extended
[Sun Dec 25 17:15:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 17:15:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 17:15:59 2011] Initial guess for spatial extent in simple fitting = 3.95"
[Sun Dec 25 17:15:59 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.133
[Sun Dec 25 17:15:59 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 3.95"
[Sun Dec 25 17:16:00 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src14.ximg exists
[Sun Dec 25 17:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src14.csv
[Sun Dec 25 17:16:00 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Dec 25 17:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src14.csv
[Sun Dec 25 17:16:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 17:16:00 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Dec 25 17:16:00 2011] fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Dec 25 17:16:00 2011] Fit fullrun_mos2_xmm0556300101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Dec 25 17:16:23 2011] Spatial fit model total counts = 251.999000, observed total counts = 252.000000
[Sun Dec 25 17:16:23 2011] Offset between fit and detection position for source 20 = 0.035665 pixels
[Sun Dec 25 17:16:23 2011] 251.333000 total counts/ 209.887000 bgd. counts: snr = 2.860816
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.035665 pixels
  Position = (209.9, 211.5) = 12 31 8.70 41 30 40.2
  Extent = 3.9 (3.0-7.7)", rotation angle = 0
  Source counts = 41.4 +/- 15.9
  Background counts = 209.9
  Rate = 0.001 +/- 0.0005
[Sun Dec 25 17:16:23 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 17:16:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 17:16:23 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 17:16:23 2011] Source does appear to be extended
[Sun Dec 25 17:16:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 17:17:02 2011] XMMSAS src. selection expression = ellipse(18211.938440, 18349.898000, 232.698007, 232.698007, 0.000000, X, Y)
[Sun Dec 25 17:17:02 2011] Not overwriting source region fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_src.reg
[Sun Dec 25 17:17:02 2011] Extracting stamp from image fullrun_mos2_xmm0556300101_pi300-10000_cl_sm2.00.img.gz, (197, 198) - (223, 225)
[Sun Dec 25 17:17:02 2011] XMMSAS bgd. selection expression = annulus(18211.938440, 18349.898000, 387.830011, 775.660022, X, Y)
[Sun Dec 25 17:17:02 2011] Writing fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20.gif
[Sun Dec 25 17:17:03 2011] ../../xmm0556300101/products/events/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0556300101/products/events/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sun Dec 25 17:17:03 2011] Mean detx,y = (11991.92, -1881.83) 
[Sun Dec 25 17:17:03 2011] ../../xmm0556300101/products/images/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_src.img and ../../xmm0556300101/products/images/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Sun Dec 25 17:17:03 2011] ../../xmm0556300101/products/spectra/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0556300101/products/spectra/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sun Dec 25 17:17:03 2011] Setting source spectrum file to fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Dec 25 17:17:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Dec 25 17:17:03 2011] ../../xmm0556300101/products/lightcurves/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0556300101/products/lightcurves/fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sun Dec 25 17:17:11 2011] Not generating rmf since there are only 41 counts
[Sun Dec 25 17:17:11 2011] rmf not generated due to insufficient counts
[Sun Dec 25 17:17:11 2011] fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20.arf exists, delete to re-create
[Sun Dec 25 17:19:03 2011] Updating aperture counts using extracted products
[Sun Dec 25 17:19:03 2011] Error reading totcts from fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Dec 25 17:19:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 17:19:05 2011] Using photon index=1.80, rate=0.00127, arf fullrun_mos2_xmm0556300101_pi300-10000_pass1_cl_src20.arf
[Sun Dec 25 17:19:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 17:19:05 2011] Updating source flux to 4.2e-14
[Sun Dec 25 17:19:10 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting