[Wed Oct  5 21:00:10 2011] Detection parameters:
  Position = (297.6, 465.4) = 9 32 12.55 21 40 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.5 +/- 21.4
  Background counts = 131.2
  Rate = 0.002 +/- 0.0002

[Wed Oct  5 21:00:12 2011] Off-axis axis estimate = 12.10'
[Wed Oct  5 21:06:58 2011] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:06:58 2011] Initial guess for spatial extent in simple fitting = 12.48"
[Wed Oct  5 21:06:58 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.079
[Wed Oct  5 21:06:58 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 12.48"
[Thu Oct  6 00:11:37 2011] fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_src24.ximg exists
[Thu Oct  6 00:11:37 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_src24.csv
[Thu Oct  6 00:11:37 2011] fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Oct  6 00:11:37 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_src24.csv
[Thu Oct  6 00:11:37 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 00:11:38 2011] fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Oct  6 00:11:38 2011] fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Oct  6 00:11:38 2011] Fit fullrun_pn_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Oct  6 04:20:57 2011] Spatial fit model total counts = 997.985000, observed total counts = 998.000000
[Thu Oct  6 04:20:57 2011] Offset between fit and detection position for source 25 = 0.244373 pixels
[Thu Oct  6 04:20:57 2011] 1012.301000 total counts/ 909.404000 bgd. counts: snr = 3.412120
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.244373 pixels
  Position = (297.4, 465.3) = 9 32 12.63 21 40 34.2
  Extent = 6.0 (3.7-9.1)", rotation angle = 0
  Source counts = 102.9 +/- 31.8
  Background counts = 909.4
  Rate = 0.002 +/- 0.0005
[Thu Oct  6 04:20:57 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 04:20:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 04:20:57 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 04:20:57 2011] Source does appear to be extended
[Thu Oct  6 04:20:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 04:21:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 04:21:45 2011] Initial guess for spatial extent in simple fitting = 6.00"
[Thu Oct  6 04:21:45 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.850
[Thu Oct  6 04:21:45 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 6.00"
[Thu Oct  6 08:40:30 2011] fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_src24.ximg exists
[Thu Oct  6 08:40:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_src24.csv
[Thu Oct  6 08:40:30 2011] fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Oct  6 08:40:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_src24.csv
[Thu Oct  6 08:40:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 08:40:32 2011] fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Oct  6 08:40:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Oct  6 08:40:32 2011] fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Oct  6 08:40:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Oct  6 08:40:32 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 11:51:08 2011] Warning, spatial fit 24 centroid is now closest to src. 30
[Thu Oct  6 11:51:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:51:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:51:08 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:51:08 2011] Source does appear to be extended
[Thu Oct  6 11:51:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:51:58 2011] XMMSAS src. selection expression = ellipse(25824.245860, 40433.481260, 359.961847, 359.961847, 0.000000, X, Y)
[Thu Oct  6 11:51:58 2011] Writing source region out to fullrun_pn_xmm0556280301_pi300-10000_pass1_cl_src25_src.reg
[Thu Oct  6 11:51:58 2011] Extracting stamp from image fullrun_pn_xmm0556280301_pi300-10000_cl_sm2.00.img.gz, (277, 445) - (318, 486)
[Thu Oct  6 11:51:59 2011] XMMSAS bgd. selection expression = annulus(25824.245860, 40433.481260, 599.936411, 1199.872822, X, Y) && !ellipse(26353.772430, 38539.515259, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Oct  6 11:51:59 2011] Writing fullrun_pn_xmm0556280301_pi300-10000_pass1_cl_src25.gif
[Thu Oct  6 12:35:39 2011] Mean detx,y = (4054.58, -12100.50) 
[Thu Oct  6 12:35:43 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 12:36:13 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 12:36:13 2011] Setting source spectrum file to fullrun_pn_xmm0556280301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Oct  6 12:36:13 2011] Setting bgd. spectrum file to fullrun_pn_xmm0556280301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu Oct  6 19:57:25 2011] Updating aperture counts using extracted products
[Thu Oct  6 19:57:25 2011] Error reading totcts from fullrun_pn_xmm0556280301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Oct  6 19:57:32 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 19:57:32 2011] Using photon index=1.80, rate=0.00154, arf fullrun_pn_xmm0556280301_pi300-10000_pass1_cl_src25.arf
[Thu Oct  6 19:57:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 19:57:32 2011] Updating source flux to 1.1e-14