[Wed Oct  5 21:01:12 2011] Detection parameters:
  Position = (303.1, 337.4) = 9 32 10.85 21 31 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.4 +/- 23.1
  Background counts = 155.0
  Rate = 0.003 +/- 0.0004

[Wed Oct  5 21:01:13 2011] Off-axis axis estimate = 2.85'
[Thu Oct  6 01:54:25 2011] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 01:54:25 2011] Initial guess for spatial extent in simple fitting = 7.85"
[Thu Oct  6 01:54:25 2011] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.659
[Thu Oct  6 01:54:25 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.85"
[Thu Oct  6 04:20:30 2011] fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_src13.ximg exists
[Thu Oct  6 04:20:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_src13.csv
[Thu Oct  6 04:20:30 2011] fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Oct  6 04:20:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_src13.csv
[Thu Oct  6 04:20:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 04:20:31 2011] fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Oct  6 04:20:31 2011] fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Oct  6 04:20:31 2011] Fit fullrun_mos2_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Oct  6 04:21:20 2011] Spatial fit model total counts = 1402.980000, observed total counts = 1403.000000
[Thu Oct  6 04:21:20 2011] Offset between fit and detection position for source 20 = 5.713592 pixels
[Thu Oct  6 04:21:20 2011] 1338.640000 total counts/ 938.019000 bgd. counts: snr = 13.080607
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 5.713592 pixels
  Position = (308.2, 334.9) = 9 32 9.26 21 31 6.9
  Extent = 15.7 (15.7-15.7)", rotation angle = 0
  Source counts = 400.6 +/- 36.6
  Background counts = 938.0
  Rate = 0.005 +/- 0.0005
[Thu Oct  6 04:21:20 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 04:21:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 04:21:20 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 04:21:20 2011] Source does appear to be extended
[Thu Oct  6 04:21:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 04:21:20 2011] Source is confused with source 2
[Thu Oct  6 10:01:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 10:01:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 10:01:30 2011] Initial guess for spatial extent in simple fitting = 15.70"
[Thu Oct  6 10:01:30 2011] source mask rpix=3.6, npix_max = 67, mask sum = 33, frac = 0.489
[Thu Oct  6 10:01:30 2011] Skipping simple spatial due to low active detector fraction
[Thu Oct  6 11:51:32 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.163960 pixels away
[Thu Oct  6 11:51:32 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:51:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:51:32 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:51:32 2011] Source does appear to be extended
[Thu Oct  6 11:51:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 18:32:28 2011] XMMSAS src. selection expression = ellipse(26765.022000, 29087.312000, 941.700027, 941.700027, 0.000000, X, Y)
[Thu Oct  6 18:32:28 2011] Writing source region out to fullrun_mos2_xmm0556280301_pi300-10000_pass1_cl_src20_src.reg
[Thu Oct  6 18:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0556280301_pi300-10000_cl_sm2.00.img.gz, (254, 281) - (362, 389)
[Thu Oct  6 18:32:28 2011] XMMSAS bgd. selection expression = annulus(26765.022000, 29087.312000, 1569.500045, 3139.000090, X, Y) && !ellipse(26543.090800, 27820.580200, 604.223217, 604.223217, 0.000000, X, Y) && !ellipse(27599.491200, 28897.545400, 446.285613, 446.285613, 0.000000, X, Y) && !ellipse(27836.182400, 30823.355600, 380.224011, 380.224011, 0.000000, X, Y) && !ellipse(25935.605316, 26991.359131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26730.842600, 26672.219200, 463.433613, 463.433613, 0.000000, X, Y) && !ellipse(28043.522200, 31846.730400, 350.120010, 350.120010, 0.000000, X, Y) && !ellipse(29074.667694, 31159.040924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.870000, 28227.002000, 1216.992035, 1174.096034, 87.997000, X, Y) && !ellipse(25955.807434, 28741.557098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28796.765200, 29134.906800, 357.436157, 357.436157, 0.000000, X, Y) && !ellipse(27641.568000, 25580.276800, 368.174411, 368.174411, 0.000000, X, Y) && !ellipse(25869.035767, 27553.205811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.203552, 27715.855560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26046.389069, 26013.811859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.400757, 26196.100861, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Oct  6 18:32:28 2011] Writing fullrun_mos2_xmm0556280301_pi300-10000_pass1_cl_src20.gif
[Thu Oct  6 18:35:48 2011] Mean detx,y = (-766.87, 832.42) 
[Thu Oct  6 18:35:50 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 18:36:01 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 18:36:02 2011] Setting source spectrum file to fullrun_mos2_xmm0556280301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Oct  6 18:36:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0556280301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Oct  6 19:57:44 2011] Updating aperture counts using extracted products
[Thu Oct  6 19:57:44 2011] Error reading totcts from fullrun_mos2_xmm0556280301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Oct  6 19:57:47 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 19:57:47 2011] Using photon index=1.80, rate=0.00535, arf fullrun_mos2_xmm0556280301_pi300-10000_pass1_cl_src20.arf
[Thu Oct  6 19:57:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 19:57:47 2011] Updating source flux to 4.9e-14
[Thu Oct  6 20:00:48 2011] Flag c found in src. 20 procflags, skipping spectral fitting