[Wed Oct  5 21:00:40 2011] Detection parameters:
  Position = (142.5, 206.9) = 9 33 0.85 21 21 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 18.4
  Background counts = 81.1
  Rate = 0.001 +/- 0.0002

[Wed Oct  5 21:00:42 2011] Off-axis axis estimate = 13.11'
[Thu Oct  6 00:11:39 2011] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 00:11:39 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Thu Oct  6 00:11:39 2011] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.988
[Thu Oct  6 00:11:39 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 12.98"
[Thu Oct  6 01:54:25 2011] fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_src36.ximg exists
[Thu Oct  6 01:54:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_src36.csv
[Thu Oct  6 01:54:25 2011] fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Oct  6 01:54:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_src36.csv
[Thu Oct  6 01:54:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 01:54:25 2011] fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Oct  6 01:54:25 2011] fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Oct  6 01:54:25 2011] Fit fullrun_mos1_xmm0556280301_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu Oct  6 04:21:09 2011] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.431307 pixels away
[Thu Oct  6 04:21:09 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 04:21:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 04:21:09 2011] Assessing source extent using major
[Thu Oct  6 04:21:09 2011] Source does appear to be extended
[Thu Oct  6 04:21:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 08:40:32 2011] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:40:32 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Thu Oct  6 08:40:32 2011] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.988
[Thu Oct  6 08:40:32 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 12.98"
[Thu Oct  6 10:01:29 2011] fullrun_mos1_xmm0556280301_pi300-10000_cl_pass1_src33.ximg exists
[Thu Oct  6 10:01:29 2011] fullrun_mos1_xmm0556280301_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Oct  6 10:01:29 2011] Fit fullrun_mos1_xmm0556280301_pi300-10000_cl_pass1_src33 appears to have run properly
[Thu Oct  6 10:01:30 2011] fullrun_mos1_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Oct  6 10:01:30 2011] fullrun_mos1_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Oct  6 10:01:30 2011] Fit fullrun_mos1_xmm0556280301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Oct  6 11:51:18 2011] Warning, spatial fit 33 centroid is now closest to src. 24
[Thu Oct  6 11:51:18 2011] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.200592 pixels away
[Thu Oct  6 11:51:18 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:51:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:51:18 2011] Assessing source extent using major
[Thu Oct  6 11:51:18 2011] Source does appear to be extended
[Thu Oct  6 11:51:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 17:40:40 2011] XMMSAS src. selection expression = ellipse(12349.659775, 17950.255569, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Oct  6 17:40:40 2011] Writing source region out to fullrun_mos1_xmm0556280301_pi300-10000_pass1_cl_src6_src.reg
[Thu Oct  6 17:40:40 2011] Extracting stamp from image fullrun_mos1_xmm0556280301_pi300-10000_cl_sm2.00.img.gz, (105, 169) - (180, 244)
[Thu Oct  6 17:40:40 2011] XMMSAS bgd. selection expression = annulus(12349.659775, 17950.255569, 1087.500000, 2175.000000, X, Y) && !ellipse(11289.345947, 20118.729507, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Oct  6 17:40:40 2011] Writing fullrun_mos1_xmm0556280301_pi300-10000_pass1_cl_src6.gif
[Thu Oct  6 17:55:48 2011] Mean detx,y = (-4099.63, -16769.11) 
[Thu Oct  6 17:55:49 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 17:56:11 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 17:56:11 2011] Setting source spectrum file to fullrun_mos1_xmm0556280301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Oct  6 17:56:11 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0556280301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Oct  6 18:31:54 2011] Not generating rmf since there are only 87 counts
[Thu Oct  6 18:31:54 2011] rmf not generated due to insufficient counts
[Thu Oct  6 19:57:38 2011] Updating aperture counts using extracted products
[Thu Oct  6 19:57:38 2011] Error reading totcts from fullrun_mos1_xmm0556280301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Oct  6 19:57:43 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 19:57:43 2011] Using photon index=1.80, rate=0.000962, arf fullrun_mos1_xmm0556280301_pi300-10000_pass1_cl_src6.arf
[Thu Oct  6 19:57:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 19:57:43 2011] Updating source flux to 3.7e-14
[Thu Oct  6 19:57:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting