[Sat Sep 24 02:39:33 2011] Detection parameters:
  Position = (326.0, 339.0) = 10 38 39.15 53 31 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.0 +/- 27.7
  Background counts = 290.1
  Rate = 0.005 +/- 0.0006

[Sat Sep 24 02:39:33 2011] Off-axis axis estimate = 3.55'
[Sat Sep 24 02:44:10 2011] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 02:44:10 2011] Initial guess for spatial extent in simple fitting = 8.21"
[Sat Sep 24 02:44:10 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.702
[Sat Sep 24 02:44:10 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 8.21"
[Sat Sep 24 03:22:09 2011] fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_src17.ximg exists
[Sat Sep 24 03:22:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_src17.csv
[Sat Sep 24 03:22:09 2011] fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Sep 24 03:22:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_src17.csv
[Sat Sep 24 03:22:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 03:22:09 2011] fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Sep 24 03:22:09 2011] fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Sep 24 03:22:09 2011] Fit fullrun_pn_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Sep 24 04:40:04 2011] Warning, spatial fit 17 centroid is now closest to src. 4
[Sat Sep 24 04:40:04 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 04:40:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 04:40:04 2011] Assessing source extent using major
[Sat Sep 24 04:40:04 2011] Source does appear to be extended
[Sat Sep 24 04:40:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 04:40:04 2011] Source is confused with source 32
[Sat Sep 24 04:40:21 2011] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 04:40:21 2011] Initial guess for spatial extent in simple fitting = 8.21"
[Sat Sep 24 04:40:21 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.702
[Sat Sep 24 04:40:21 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 8.21"
[Sat Sep 24 05:23:30 2011] fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_src17.ximg exists
[Sat Sep 24 05:23:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_src17.csv
[Sat Sep 24 05:23:30 2011] fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Sep 24 05:23:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_src17.csv
[Sat Sep 24 05:23:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:23:30 2011] fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Sep 24 05:23:30 2011] fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Sep 24 05:23:30 2011] Fit fullrun_pn_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Sep 24 07:15:37 2011] Source 17 is offset by 7.509809 and 6.529035 pixels which is larger than
2 X fitted extent = 1.407366 x 1.407366, not incorporating fit results
[Sat Sep 24 07:15:37 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:15:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:15:37 2011] Assessing source extent using major
[Sat Sep 24 07:15:37 2011] Source does appear to be extended
[Sat Sep 24 07:15:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:15:50 2011] XMMSAS src. selection expression = ellipse(28310.441406, 29443.114075, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 07:15:50 2011] Writing source region out to fullrun_pn_xmm0556280201_pi300-10000_pass1_cl_src17_src.reg
[Sat Sep 24 07:15:50 2011] Extracting stamp from image fullrun_pn_xmm0556280201_pi300-10000_cl_sm2.00.img.gz, (288, 301) - (363, 376)
[Sat Sep 24 07:15:50 2011] XMMSAS bgd. selection expression = annulus(28310.441406, 29443.114075, 1087.500000, 2175.000000, X, Y) && !ellipse(27130.344800, 27749.435000, 2746.488079, 2746.488079, 0.000000, X, Y) && !ellipse(27559.313200, 28784.087000, 396.908011, 396.908011, 0.000000, X, Y) && !ellipse(26345.294922, 26859.162567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.447968, 27533.197510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.896301, 29776.309631, 3480.000000, 3480.000000, 0.000000, X, Y)
[Sat Sep 24 07:15:50 2011] Writing fullrun_pn_xmm0556280201_pi300-10000_pass1_cl_src17.gif
[Sat Sep 24 07:38:13 2011] Mean detx,y = (2563.62, -475.22) 
[Sat Sep 24 07:38:15 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 07:38:28 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 07:38:28 2011] Setting source spectrum file to fullrun_pn_xmm0556280201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Sep 24 07:38:28 2011] Setting bgd. spectrum file to fullrun_pn_xmm0556280201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Sep 24 10:57:03 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 10:57:03 2011] rmf not generated due to insufficient counts
[Sun Sep 25 11:48:04 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:48:04 2011] Error reading totcts from fullrun_pn_xmm0556280201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Sep 25 11:48:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:48:05 2011] Using photon index=1.80, rate=0.00465, arf fullrun_pn_xmm0556280201_pi300-10000_pass1_cl_src17.arf
[Sun Sep 25 11:48:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:48:05 2011] Updating source flux to 1.2e-14
[Sun Sep 25 11:50:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting