[Sat Sep 24 02:40:12 2011] Detection parameters:
  Position = (313.5, 319.3) = 10 38 45.23 53 30 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5650.4 +/- 91.3
  Background counts = 108.0
  Rate = 0.1 +/- 0.002

[Sat Sep 24 02:40:12 2011] Off-axis axis estimate = 1.87'
[Sat Sep 24 04:07:08 2011] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 04:07:08 2011] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Sep 24 04:07:08 2011] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.520
[Sat Sep 24 04:07:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Sat Sep 24 04:39:57 2011] fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep 24 04:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 04:39:57 2011] fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep 24 04:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 04:39:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 04:39:57 2011] fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 04:39:57 2011] fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 04:39:57 2011] Fit fullrun_mos2_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 04:40:12 2011] Spatial fit model total counts = 6599.140000, observed total counts = 6598.000000
[Sat Sep 24 04:40:12 2011] Offset between fit and detection position for source 1 = 0.034597 pixels
[Sat Sep 24 04:40:12 2011] 6315.040000 total counts/ 2961.020000 bgd. counts: snr = 61.637495
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.034597 pixels
  Position = (313.5, 319.3) = 10 38 45.24 53 30 8.3
  Extent = 7.5 (7.3-7.8)", rotation angle = 0
  Source counts = 3354.0 +/- 79.5
  Background counts = 2961.0
  Rate = 0.07 +/- 0.002
[Sat Sep 24 04:40:12 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 04:40:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 04:40:12 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 04:40:12 2011] Source does appear to be extended
[Sat Sep 24 04:40:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 04:40:12 2011] Source is confused with source 6
[Sat Sep 24 06:15:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 06:15:27 2011] Initial guess for spatial extent in simple fitting = 7.54"
[Sat Sep 24 06:15:27 2011] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.701
[Sat Sep 24 06:15:27 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.54"
[Sat Sep 24 07:15:32 2011] fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 07:15:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 07:15:32 2011] fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 07:15:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 07:15:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 07:15:32 2011] fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 07:15:32 2011] fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 07:15:32 2011] Fit fullrun_mos2_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 07:15:42 2011] Spatial fit model total counts = 6598.960000, observed total counts = 6598.000000
[Sat Sep 24 07:15:42 2011] Offset between fit and detection position for source 1 = 0.022443 pixels
[Sat Sep 24 07:15:42 2011] 6312.280000 total counts/ 2895.080000 bgd. counts: snr = 63.509708
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022443 pixels
  Position = (313.5, 319.3) = 10 38 45.25 53 30 8.3
  Extent = 7.6 (7.4-7.9)", rotation angle = 0
  Source counts = 3417.2 +/- 79.4
  Background counts = 2895.1
  Rate = 0.08 +/- 0.002
[Sat Sep 24 07:15:42 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:15:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:15:42 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:15:42 2011] Source does appear to be extended
[Sat Sep 24 07:15:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:05:30 2011] Counts = 3417.200000, rescaling region sizes by 2.000000
[Sun Sep 25 11:05:30 2011] XMMSAS src. selection expression = ellipse(27224.047600, 27733.210200, 916.892426, 916.892426, 0.000000, X, Y)
[Sun Sep 25 11:05:30 2011] Writing source region out to fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1_src.reg
[Sun Sep 25 11:05:30 2011] Extracting stamp from image fullrun_mos2_xmm0556280201_pi300-10000_cl_sm2.00.img.gz, (261, 267) - (366, 372)
[Sun Sep 25 11:05:30 2011] XMMSAS bgd. selection expression = annulus(27224.047600, 27733.210200, 3056.308088, 6112.616176, X, Y) && !ellipse(26993.366000, 28240.916000, 491.059214, 491.059214, 0.000000, X, Y) && !ellipse(26861.450000, 27470.450000, 450.592013, 450.592013, 0.000000, X, Y) && !ellipse(26359.114349, 26856.032288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27572.383600, 28782.468600, 325.410409, 325.410409, 0.000000, X, Y) && !ellipse(32096.241000, 28696.383400, 352.026410, 352.026410, 0.000000, X, Y) && !ellipse(32963.261600, 29635.350400, 482.330414, 482.330414, 0.000000, X, Y) && !ellipse(28295.143127, 29432.600159, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 11:05:30 2011] Writing fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1.gif
[Sun Sep 25 11:05:35 2011] Mean detx,y = (-772.50, -541.43) 
[Sun Sep 25 11:05:36 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 11:06:03 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 11:06:04 2011] Setting source spectrum file to fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 11:06:04 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep 25 11:48:06 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:48:06 2011] Error reading totcts from fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 11:48:07 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:48:07 2011] Using photon index=1.80, rate=0.0752, arf fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 11:48:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:48:07 2011] Updating source flux to 7.5e-13
[Sun Sep 25 11:49:37 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Sep 25 11:50:28 2011] Reading fit data from xmm0556280201/analysis//spectral/fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Sep 25 11:50:28 2011] Spectral fit parameter nH value = 1.22723e+21
[Sun Sep 25 11:50:28 2011] Spectral fit parameter PhoIndex value = 2.24765
[Sun Sep 25 11:50:28 2011] Failed to get F(0.3-8.0) from xmm0556280201/analysis//spectral/fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 11:50:28 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:50:28 2011] Using Nh = 1.2e+21, photon index=2.25, rate=0.0752, arf fullrun_mos2_xmm0556280201_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 11:50:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:50:28 2011] Updating source flux to 7e-13