[Sat Sep 24 02:39:54 2011] Detection parameters:
  Position = (312.7, 319.1) = 10 38 45.62 53 30 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7212.5 +/- 104.1
  Background counts = 133.6
  Rate = 0.1 +/- 0.002

[Sat Sep 24 02:39:55 2011] Off-axis axis estimate = 1.82'
[Sat Sep 24 03:22:09 2011] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 03:22:09 2011] Initial guess for spatial extent in simple fitting = 7.34"
[Sat Sep 24 03:22:09 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Sat Sep 24 03:22:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Sat Sep 24 04:07:07 2011] fullrun_mos1_xmm0556280201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep 24 04:07:07 2011] fullrun_mos1_xmm0556280201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep 24 04:07:07 2011] Fit fullrun_mos1_xmm0556280201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Sep 24 04:07:08 2011] fullrun_mos1_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 04:07:08 2011] fullrun_mos1_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 04:07:08 2011] Fit fullrun_mos1_xmm0556280201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 04:40:08 2011] Spatial fit model total counts = 7363.620000, observed total counts = 7576.000000
[Sat Sep 24 04:40:08 2011] Offset between fit and detection position for source 1 = 0.436793 pixels
[Sat Sep 24 04:40:08 2011] 7398.260000 total counts/ 2272.400000 bgd. counts: snr = 107.528689
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.436793 pixels
  Position = (312.5, 319.5) = 10 38 45.74 53 30 8.8
  Extent = 11.9" x 8.6", rotation angle = 54
  Source counts = 5125.9 +/- 86.0
  Background counts = 2272.4
  Rate = 0.1 +/- 0.002
[Sat Sep 24 04:40:08 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 04:40:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 04:40:08 2011] Assessing source extent using major
[Sat Sep 24 04:40:08 2011] Source does appear to be extended
[Sat Sep 24 04:40:08 2011] Computing asymmetry using major and minor axis, asym = 1.38
[Sat Sep 24 05:23:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 05:23:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 05:23:30 2011] Initial guess for spatial extent in simple fitting = 10.25"
[Sat Sep 24 05:23:30 2011] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.765
[Sat Sep 24 05:23:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.25"
[Sat Sep 24 06:15:26 2011] fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 06:15:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 06:15:26 2011] fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 06:15:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 06:15:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 06:15:27 2011] fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 06:15:27 2011] fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 06:15:27 2011] Fit fullrun_mos1_xmm0556280201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 07:15:40 2011] Spatial fit model total counts = 7958.540000, observed total counts = 7960.000000
[Sat Sep 24 07:15:40 2011] Offset between fit and detection position for source 1 = 0.020014 pixels
[Sat Sep 24 07:15:40 2011] 7956.630000 total counts/ 2305.090000 bgd. counts: snr = 117.712576
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020014 pixels
  Position = (312.5, 319.4) = 10 38 45.73 53 30 8.8
  Extent = 10.8 (10.5-11.2)", rotation angle = 0
  Source counts = 5651.5 +/- 89.2
  Background counts = 2305.1
  Rate = 0.1 +/- 0.002
[Sat Sep 24 07:15:40 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 07:15:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 07:15:40 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 07:15:40 2011] Source does appear to be extended
[Sat Sep 24 07:15:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 17:50:05 2011] Counts = 5651.540000, rescaling region sizes by 2.000000
[Sat Sep 24 17:50:05 2011] XMMSAS src. selection expression = ellipse(27138.439400, 27743.089000, 1301.856037, 1301.856037, 0.000000, X, Y)
[Sat Sep 24 17:50:05 2011] Writing source region out to fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep 24 17:50:05 2011] Extracting stamp from image fullrun_mos1_xmm0556280201_pi300-10000_cl_sm2.00.img.gz, (238, 245) - (387, 394)
[Sat Sep 24 17:50:05 2011] XMMSAS bgd. selection expression = annulus(27138.439400, 27743.089000, 4339.520125, 8679.040250, X, Y) && !ellipse(18192.557846, 28302.091681, 514.075087, 327.621927, 74.550200, X, Y) && !ellipse(26339.339691, 26861.570679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.446000, 28874.578000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(32394.518982, 35810.904480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32087.969299, 28684.139435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26819.010559, 28613.420074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22416.109100, 31453.332336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27359.956848, 28976.500641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28602.646000, 29653.472000, 2628.208076, 2628.208076, 0.000000, X, Y) && !ellipse(27061.564000, 25941.946000, 1089.104031, 1089.104031, 0.000000, X, Y) && !ellipse(28221.410309, 28639.333160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36377.631104, 25542.249451, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sat Sep 24 17:50:05 2011] Writing fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1.gif
[Sat Sep 24 17:50:11 2011] Mean detx,y = (-327.16, 532.97) 
[Sat Sep 24 17:50:13 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 17:53:00 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 17:53:00 2011] Setting source spectrum file to fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 17:53:00 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep 25 11:48:05 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:48:05 2011] Error reading totcts from fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 11:48:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:48:06 2011] Using photon index=1.80, rate=0.133, arf fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 11:48:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:48:06 2011] Updating source flux to 1.1e-12
[Sun Sep 25 11:49:37 2011] Reading fit data from xmm0556280201/analysis//spectral/fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Sep 25 11:49:37 2011] Spectral fit parameter nH value = 1.11631e+21
[Sun Sep 25 11:49:37 2011] Spectral fit parameter PhoIndex value = 2.21173
[Sun Sep 25 11:49:37 2011] Failed to get F(0.3-8.0) from xmm0556280201/analysis//spectral/fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 11:49:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:49:37 2011] Using Nh = 1.1e+21, photon index=2.21, rate=0.133, arf fullrun_mos1_xmm0556280201_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 11:49:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:49:37 2011] Updating source flux to 1.1e-12