[Fri Sep 30 21:33:39 2011] Detection parameters:
  Position = (200.2, 325.9) = 10 39 35.93 53 30 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7046.0 +/- 99.6
  Background counts = 164.7
  Rate = 0.1 +/- 0.002

[Fri Sep 30 21:33:40 2011] Off-axis axis estimate = 7.39'
[Fri Sep 30 21:38:05 2011] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:38:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 21:38:05 2011] Initial guess for spatial extent in simple fitting = 10.13"
[Fri Sep 30 21:38:05 2011] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.907
[Fri Sep 30 21:38:05 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.13"
[Fri Sep 30 22:34:43 2011] fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Sep 30 22:34:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_src3.csv
[Fri Sep 30 22:34:43 2011] fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Sep 30 22:34:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_src3.csv
[Fri Sep 30 22:34:43 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 22:34:43 2011] fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 22:34:43 2011] fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 22:34:43 2011] Fit fullrun_pn_xmm0556280101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 23:45:05 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.942469 pixels away
[Fri Sep 30 23:45:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 23:45:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 23:45:05 2011] Assessing source extent using major
[Fri Sep 30 23:45:05 2011] Source does appear to be extended
[Fri Sep 30 23:45:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 23:45:29 2011] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 23:45:29 2011] Initial guess for spatial extent in simple fitting = 10.13"
[Fri Sep 30 23:45:29 2011] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.907
[Fri Sep 30 23:45:29 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.13"
[Sat Oct  1 00:45:53 2011] fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Oct  1 00:45:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_src3.csv
[Sat Oct  1 00:45:53 2011] fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Oct  1 00:45:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_src3.csv
[Sat Oct  1 00:45:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 00:45:53 2011] fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct  1 00:45:53 2011] fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct  1 00:45:53 2011] Fit fullrun_pn_xmm0556280101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct  1 02:01:36 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.150832 pixels away
[Sat Oct  1 02:01:36 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.998683 pixels away
[Sat Oct  1 02:01:36 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 02:01:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 02:01:36 2011] Assessing source extent using major
[Sat Oct  1 02:01:36 2011] Source does appear to be extended
[Sat Oct  1 02:01:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 02:02:04 2011] Counts = 7046.005859, rescaling region sizes by 2.000000
[Sat Oct  1 02:02:04 2011] XMMSAS src. selection expression = ellipse(17369.571457, 28303.814453, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Oct  1 02:02:04 2011] Writing source region out to fullrun_pn_xmm0556280101_pi300-10000_pass1_cl_src3_src.reg
[Sat Oct  1 02:02:04 2011] Extracting stamp from image fullrun_pn_xmm0556280101_pi300-10000_cl_sm2.00.img.gz, (125, 251) - (275, 401)
[Sat Oct  1 02:02:04 2011] XMMSAS bgd. selection expression = annulus(17369.571457, 28303.814453, 4350.000000, 8700.000000, X, Y) && !ellipse(26290.437400, 27681.414000, 2640.792076, 2640.792076, 0.000000, X, Y) && !ellipse(25495.741302, 26825.403870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21401.856049, 31467.767731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15472.055194, 27277.344915, 558.610404, 337.280125, 88.343388, X, Y) && !ellipse(25727.953000, 37042.489000, 434.538413, 434.538413, 0.000000, X, Y) && !ellipse(7925.101242, 35965.650208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10086.272522, 26909.438202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10378.718689, 37553.612610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18033.041000, 33489.290200, 334.900010, 334.900010, 0.000000, X, Y) && !ellipse(24046.833405, 24236.386566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22838.643780, 23172.890020, 344.963210, 344.963210, 0.000000, X, Y) && !ellipse(9213.242800, 21446.208000, 2230.016064, 1240.336036, 56.566000, X, Y)
[Sat Oct  1 02:02:04 2011] Writing fullrun_pn_xmm0556280101_pi300-10000_pass1_cl_src3.gif
[Sat Oct  1 02:25:11 2011] Mean detx,y = (-7171.33, -4908.61) 
[Sat Oct  1 02:25:24 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct  1 02:29:57 2011] Binned source spectrum to 10 counts/bin
[Sat Oct  1 02:29:58 2011] Setting source spectrum file to fullrun_pn_xmm0556280101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Oct  1 02:29:58 2011] Setting bgd. spectrum file to fullrun_pn_xmm0556280101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Oct  1 07:02:31 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Oct  1 07:02:31 2011] rmf not generated due to insufficient counts
[Sat Oct  1 08:54:49 2011] Updating aperture counts using extracted products
[Sat Oct  1 08:54:49 2011] Error reading totcts from fullrun_pn_xmm0556280101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Oct  1 08:54:50 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 08:54:50 2011] Using photon index=1.80, rate=0.12, arf fullrun_pn_xmm0556280101_pi300-10000_pass1_cl_src3.arf
[Sat Oct  1 08:54:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct  1 08:54:50 2011] Updating source flux to 6.2e-13
[Sat Oct  1 08:56:22 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting