[Thu Jun 28 15:13:29 2012] Detection parameters:
  Position = (272.8, 261.1) = 20 6 1.14 35 45 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 846.8 +/- 38.2
  Background counts = 246.6
  Rate = 0.02 +/- 0.0009

[Thu Jun 28 15:13:31 2012] Off-axis axis estimate = 3.28'
[Thu Jun 28 15:19:06 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 15:19:06 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Thu Jun 28 15:19:06 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.721
[Thu Jun 28 15:19:06 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.07"
[Thu Jun 28 17:28:20 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 28 17:28:20 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 28 17:28:20 2012] Fit fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src9 appears to have run properly
[Thu Jun 28 17:28:21 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 28 17:28:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 28 17:28:21 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 28 17:28:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 28 17:28:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 19:08:08 2012] Warning, spatial fit 9 centroid is now closest to src. 61
[Thu Jun 28 19:08:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 19:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 19:08:08 2012] Assessing source extent using major
[Thu Jun 28 19:08:08 2012] Source does appear to be extended
[Thu Jun 28 19:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 19:08:33 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 19:08:33 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Thu Jun 28 19:08:33 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.721
[Thu Jun 28 19:08:33 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.07"
[Thu Jun 28 21:43:35 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun 28 21:43:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src9.csv
[Thu Jun 28 21:43:35 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun 28 21:43:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src9.csv
[Thu Jun 28 21:43:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 21:43:36 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun 28 21:43:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Jun 28 21:43:36 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun 28 21:43:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Jun 28 21:43:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 23:19:28 2012] Source 10 is offset by 6.867171 and 4.962904 pixels which is larger than
2 X fitted extent = 0.927646 x 0.927646, not incorporating fit results
[Thu Jun 28 23:19:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 23:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 23:19:28 2012] Assessing source extent using major
[Thu Jun 28 23:19:28 2012] Source does appear to be extended
[Thu Jun 28 23:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 23:19:53 2012] XMMSAS src. selection expression = ellipse(23683.659912, 22667.784637, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 23:19:53 2012] Writing source region out to fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 28 23:19:53 2012] Extracting stamp from image fullrun_pn_xmm0556260301_pi300-10000_cl_sm2.00.img.gz, (235, 224) - (310, 299)
[Thu Jun 28 23:19:53 2012] XMMSAS bgd. selection expression = annulus(23683.659912, 22667.784637, 1087.500000, 2175.000000, X, Y) && !ellipse(24648.172200, 24313.240600, 1436.270441, 1405.360840, 240.473000, X, Y) && !ellipse(24895.040924, 23034.754822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25140.200400, 22421.991800, 369.231211, 369.231211, 0.000000, X, Y) && !ellipse(24721.712646, 25696.681885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.715042, 25201.457855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23525.738770, 24653.385468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.469391, 22927.749176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22202.959366, 22684.989227, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 23:19:53 2012] Writing fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src10.gif
[Thu Jun 28 23:42:20 2012] Mean detx,y = (945.73, -1917.33) 
[Thu Jun 28 23:42:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 23:42:41 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 23:42:41 2012] Setting source spectrum file to fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 28 23:42:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun 29 00:43:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 29 00:43:54 2012] rmf not generated due to insufficient counts
[Fri Jun 29 03:12:02 2012] Updating aperture counts using extracted products
[Fri Jun 29 03:12:02 2012] Error reading totcts from fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 29 03:12:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 03:12:03 2012] Using photon index=1.80, rate=0.0209, arf fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src10.arf
[Fri Jun 29 03:12:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 03:12:03 2012] Updating source flux to 6.4e-14
[Fri Jun 29 03:15:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting