[Thu Jun 28 15:13:29 2012] Detection parameters:
  Position = (222.6, 397.0) = 20 6 19.13 35 55 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2545.3 +/- 64.1
  Background counts = 195.1
  Rate = 0.04 +/- 0.001

[Thu Jun 28 15:13:31 2012] Off-axis axis estimate = 9.02'
[Thu Jun 28 15:19:06 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 15:19:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 28 15:19:06 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Thu Jun 28 15:19:06 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Thu Jun 28 15:19:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.94"
[Thu Jun 28 17:28:20 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 28 17:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src1.csv
[Thu Jun 28 17:28:20 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 28 17:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src1.csv
[Thu Jun 28 17:28:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 17:28:21 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 28 17:28:21 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 28 17:28:21 2012] Fit fullrun_pn_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 28 19:08:08 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.522716 pixels away
[Thu Jun 28 19:08:08 2012] Source 1 is offset by 1.704203 and 6.086588 pixels which is larger than
2 X fitted extent = 1.237048 x 1.237048, not incorporating fit results
[Thu Jun 28 19:08:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 19:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 19:08:08 2012] Assessing source extent using major
[Thu Jun 28 19:08:08 2012] Source does appear to be extended
[Thu Jun 28 19:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 19:08:08 2012] Source is confused with source 4
[Thu Jun 28 19:08:33 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 19:08:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 28 19:08:33 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Thu Jun 28 19:08:33 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Thu Jun 28 19:08:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.94"
[Thu Jun 28 21:43:34 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 28 21:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 21:43:34 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 28 21:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 21:43:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 21:43:35 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 28 21:43:35 2012] fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 28 21:43:35 2012] Fit fullrun_pn_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 28 23:19:28 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.522716 pixels away
[Thu Jun 28 23:19:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 23:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 23:19:28 2012] Assessing source extent using major
[Thu Jun 28 23:19:28 2012] Source does appear to be extended
[Thu Jun 28 23:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 23:19:53 2012] Counts = 2545.309570, rescaling region sizes by 2.000000
[Thu Jun 28 23:19:53 2012] XMMSAS src. selection expression = ellipse(19317.753632, 34489.021149, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 28 23:19:53 2012] Writing source region out to fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 28 23:19:53 2012] Extracting stamp from image fullrun_pn_xmm0556260301_pi300-10000_cl_sm2.00.img.gz, (148, 322) - (298, 472)
[Thu Jun 28 23:19:53 2012] XMMSAS bgd. selection expression = annulus(19317.753632, 34489.021149, 4350.000000, 8700.000000, X, Y) && !ellipse(18762.512800, 37506.520000, 2087.882460, 1216.341635, 338.012683, X, Y) && !ellipse(18875.383270, 34751.168121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21532.082581, 31379.634033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25668.263000, 30169.765000, 440.443213, 440.443213, 0.000000, X, Y) && !ellipse(19858.941528, 25181.964630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17733.930420, 36934.165070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26364.135010, 36334.091278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17823.188522, 37446.954773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19115.245255, 36506.888550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24373.957200, 29818.328400, 373.569611, 373.569611, 0.000000, X, Y) && !ellipse(17112.267258, 28457.283112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23578.169250, 28201.389330, 908.258392, 378.274652, 37.095631, X, Y) && !ellipse(26974.921844, 27521.199432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19212.289230, 39010.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20611.355591, 37719.841339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16848.843216, 37356.179321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16718.851654, 36393.253296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18311.266541, 33011.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.766174, 32235.817261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.847900, 32123.355530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18101.918808, 28747.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22613.728241, 28375.465729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24721.712646, 25696.681885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17898.862167, 26135.064392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.715042, 25201.457855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20035.628418, 39010.084686, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 23:19:53 2012] Writing fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src1.gif
[Thu Jun 28 23:20:20 2012] Mean detx,y = (6393.95, 9532.63) 
[Thu Jun 28 23:20:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 23:23:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 23:23:08 2012] Setting source spectrum file to fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 23:23:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 29 00:29:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 29 00:29:52 2012] rmf not generated due to insufficient counts
[Fri Jun 29 03:12:01 2012] Updating aperture counts using extracted products
[Fri Jun 29 03:12:02 2012] Error reading totcts from fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 29 03:12:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 03:12:03 2012] Using photon index=1.80, rate=0.043, arf fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src1.arf
[Fri Jun 29 03:12:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 03:12:03 2012] Updating source flux to 1.8e-13
[Fri Jun 29 03:15:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 29 03:18:23 2012] xmm0556260301/analysis//spectral/fullrun_pn_xmm0556260301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete