[Thu Jun 28 15:14:29 2012] Detection parameters:
  Position = (326.7, 177.7) = 20 5 41.86 35 39 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.9 +/- 13.9
  Background counts = 55.3
  Rate = 0.002 +/- 0.0004

[Thu Jun 28 15:14:29 2012] Off-axis axis estimate = 8.99'
[Thu Jun 28 18:06:51 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 18:06:51 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Thu Jun 28 18:06:51 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Thu Jun 28 18:06:51 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.92"
[Thu Jun 28 19:07:55 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jun 28 19:07:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src28.csv
[Thu Jun 28 19:07:55 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jun 28 19:07:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src28.csv
[Thu Jun 28 19:07:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 19:07:56 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jun 28 19:07:56 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jun 28 19:07:56 2012] Fit fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Jun 28 19:08:19 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 10.937528 pixels away
[Thu Jun 28 19:08:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 19:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 19:08:19 2012] Assessing source extent using major
[Thu Jun 28 19:08:19 2012] Source does appear to be extended
[Thu Jun 28 19:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 22:18:16 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 22:18:16 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Thu Jun 28 22:18:16 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Thu Jun 28 22:18:16 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.92"
[Thu Jun 28 23:19:14 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jun 28 23:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src27.csv
[Thu Jun 28 23:19:14 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jun 28 23:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src27.csv
[Thu Jun 28 23:19:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 23:19:15 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jun 28 23:19:15 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jun 28 23:19:15 2012] Fit fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Jun 28 23:19:39 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 10.937528 pixels away
[Thu Jun 28 23:19:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 23:19:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 23:19:39 2012] Assessing source extent using major
[Thu Jun 28 23:19:39 2012] Source does appear to be extended
[Thu Jun 28 23:19:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 02:15:33 2012] XMMSAS src. selection expression = ellipse(28378.120758, 15414.229996, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 29 02:15:33 2012] Writing source region out to fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src37_src.reg
[Fri Jun 29 02:15:33 2012] Extracting stamp from image fullrun_mos2_xmm0556260301_pi300-10000_cl_sm2.00.img.gz, (289, 140) - (364, 215)
[Fri Jun 29 02:15:33 2012] XMMSAS bgd. selection expression = annulus(28378.120758, 15414.229996, 1087.500000, 2175.000000, X, Y)
[Fri Jun 29 02:15:33 2012] Writing fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src37.gif
[Fri Jun 29 02:29:30 2012] Mean detx,y = (4637.28, 8613.49) 
[Fri Jun 29 02:29:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 02:29:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 02:29:44 2012] Setting source spectrum file to fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Fri Jun 29 02:29:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Fri Jun 29 03:08:53 2012] Not generating rmf since there are only 60 counts
[Fri Jun 29 03:08:53 2012] rmf not generated due to insufficient counts
[Fri Jun 29 03:12:06 2012] Updating aperture counts using extracted products
[Fri Jun 29 03:12:06 2012] Error reading totcts from fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Fri Jun 29 03:12:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 03:12:07 2012] Using photon index=1.80, rate=0.00192, arf fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src37.arf
[Fri Jun 29 03:12:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 03:12:07 2012] Updating source flux to 3.8e-14
[Fri Jun 29 03:13:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting