[Thu Jun 28 15:14:28 2012] Detection parameters:
  Position = (273.2, 274.0) = 20 6 0.98 35 46 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.9 +/- 16.6
  Background counts = 81.9
  Rate = 0.002 +/- 0.0003

[Thu Jun 28 15:14:29 2012] Off-axis axis estimate = 2.55'
[Thu Jun 28 18:06:51 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 18:06:51 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Jun 28 18:06:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.727
[Thu Jun 28 18:06:51 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.70"
[Thu Jun 28 19:07:55 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src35.ximg exists
[Thu Jun 28 19:07:55 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu Jun 28 19:07:55 2012] Fit fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_src35 appears to have run properly
[Thu Jun 28 19:07:56 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu Jun 28 19:07:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Thu Jun 28 19:07:56 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Jun 28 19:07:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Thu Jun 28 19:07:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 19:08:19 2012] Source 29 is offset by 8.558142 and 3.654596 pixels which is larger than
2 X fitted extent = 1.041903 x 1.041903, not incorporating fit results
[Thu Jun 28 19:08:19 2012] Warning, spatial fit 35 centroid is now closest to src. 26
[Thu Jun 28 19:08:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 19:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 19:08:19 2012] Assessing source extent using major
[Thu Jun 28 19:08:19 2012] Source does appear to be extended
[Thu Jun 28 19:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 22:18:16 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 22:18:16 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Jun 28 22:18:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.727
[Thu Jun 28 22:18:16 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.70"
[Thu Jun 28 23:19:14 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src32.ximg exists
[Thu Jun 28 23:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src32.csv
[Thu Jun 28 23:19:14 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Jun 28 23:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src32.csv
[Thu Jun 28 23:19:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 23:19:15 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Jun 28 23:19:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Jun 28 23:19:15 2012] fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Jun 28 23:19:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Jun 28 23:19:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 23:19:39 2012] Source 29 is offset by -9.718801 and 2.048136 pixels which is larger than
2 X fitted extent = 9.941701 x 1.242713, not incorporating fit results
[Thu Jun 28 23:19:39 2012] Spatial fit model total counts = -116.618000, observed total counts = 1135.000000
[Thu Jun 28 23:19:39 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 28 23:19:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 23:19:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 23:19:39 2012] Assessing source extent using major
[Thu Jun 28 23:19:39 2012] Source does appear to be extended
[Thu Jun 28 23:19:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 02:15:33 2012] XMMSAS src. selection expression = ellipse(23721.892334, 23788.615875, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 29 02:15:33 2012] Writing source region out to fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src29_src.reg
[Fri Jun 29 02:15:33 2012] Extracting stamp from image fullrun_mos2_xmm0556260301_pi300-10000_cl_sm2.00.img.gz, (236, 236) - (311, 311)
[Fri Jun 29 02:15:33 2012] XMMSAS bgd. selection expression = annulus(23721.892334, 23788.615875, 1087.500000, 2175.000000, X, Y) && !ellipse(24661.829240, 24317.754200, 1329.974438, 1170.424834, 15.449560, X, Y) && !ellipse(23684.751129, 22693.434875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.445400, 22435.781000, 313.767209, 313.767209, 0.000000, X, Y) && !ellipse(23604.999359, 24744.397217, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 29 02:15:33 2012] Writing fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src29.gif
[Fri Jun 29 02:30:44 2012] Mean detx,y = (-708.83, 619.01) 
[Fri Jun 29 02:30:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 02:30:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 02:30:53 2012] Setting source spectrum file to fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 29 02:30:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jun 29 03:09:18 2012] Not generating rmf since there are only 80 counts
[Fri Jun 29 03:09:18 2012] rmf not generated due to insufficient counts
[Fri Jun 29 03:12:06 2012] Updating aperture counts using extracted products
[Fri Jun 29 03:12:06 2012] Error reading totcts from fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 29 03:12:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 03:12:07 2012] Using photon index=1.80, rate=0.00153, arf fullrun_mos2_xmm0556260301_pi300-10000_pass1_cl_src29.arf
[Fri Jun 29 03:12:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 03:12:07 2012] Updating source flux to 1.6e-14
[Fri Jun 29 03:13:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting