[Thu Jun 28 15:13:56 2012] Detection parameters:
  Position = (215.9, 399.6) = 20 6 21.51 35 55 59.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.3 +/- 13.1
  Background counts = 70.3
  Rate = 0.001 +/- 0.0002

[Thu Jun 28 15:13:57 2012] Off-axis axis estimate = 9.47'
[Thu Jun 28 17:28:22 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 17:28:22 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Thu Jun 28 17:28:22 2012] source mask rpix=2.6, npix_max = 37, mask sum = 21, frac = 0.559
[Thu Jun 28 17:28:22 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.16"
[Thu Jun 28 18:06:51 2012] fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jun 28 18:06:51 2012] fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jun 28 18:06:51 2012] Fit fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_src27 appears to have run properly
[Thu Jun 28 18:06:51 2012] fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jun 28 18:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jun 28 18:06:51 2012] fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jun 28 18:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jun 28 18:06:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556260301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 19:08:13 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.586920 pixels away
[Thu Jun 28 19:08:13 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 19:08:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 19:08:13 2012] Assessing source extent using major
[Thu Jun 28 19:08:13 2012] Source does appear to be extended
[Thu Jun 28 19:08:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 21:43:36 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 21:43:36 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Thu Jun 28 21:43:36 2012] source mask rpix=2.6, npix_max = 37, mask sum = 21, frac = 0.559
[Thu Jun 28 21:43:36 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.16"
[Thu Jun 28 22:18:16 2012] fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jun 28 22:18:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_src25.csv
[Thu Jun 28 22:18:16 2012] fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jun 28 22:18:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_src25.csv
[Thu Jun 28 22:18:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 22:18:16 2012] fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jun 28 22:18:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Jun 28 22:18:16 2012] fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jun 28 22:18:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Jun 28 22:18:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556260301_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 23:19:32 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.236712 pixels away
[Thu Jun 28 23:19:32 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 23:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 23:19:32 2012] Assessing source extent using major
[Thu Jun 28 23:19:32 2012] Source does appear to be extended
[Thu Jun 28 23:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 01:16:52 2012] XMMSAS src. selection expression = ellipse(18738.865646, 34720.444122, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 29 01:16:52 2012] Writing source region out to fullrun_mos1_xmm0556260301_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 29 01:16:52 2012] Extracting stamp from image fullrun_mos1_xmm0556260301_pi300-10000_cl_sm2.00.img.gz, (178, 362) - (253, 437)
[Fri Jun 29 01:16:52 2012] XMMSAS bgd. selection expression = annulus(18738.865646, 34720.444122, 1087.500000, 2175.000000, X, Y) && !ellipse(18751.992111, 37508.323120, 2610.000000, 2610.000000, 0.000000, X, Y)
[Fri Jun 29 01:16:52 2012] Writing fullrun_mos1_xmm0556260301_pi300-10000_pass1_cl_src3.gif
[Fri Jun 29 01:36:51 2012] Mean detx,y = (-9557.20, 6806.44) 
[Fri Jun 29 01:36:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 01:37:02 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 01:37:02 2012] Setting source spectrum file to fullrun_mos1_xmm0556260301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 29 01:37:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556260301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 29 02:15:23 2012] Not generating rmf since there are only 63 counts
[Fri Jun 29 02:15:23 2012] rmf not generated due to insufficient counts
[Fri Jun 29 03:12:05 2012] Updating aperture counts using extracted products
[Fri Jun 29 03:12:05 2012] Error reading totcts from fullrun_mos1_xmm0556260301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 29 03:12:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 03:12:06 2012] Using photon index=1.80, rate=0.00103, arf fullrun_mos1_xmm0556260301_pi300-10000_pass1_cl_src3.arf
[Fri Jun 29 03:12:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 03:12:06 2012] Updating source flux to 5.1e-14
[Fri Jun 29 03:12:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting