[Tue Aug  7 21:27:18 2012] Detection parameters:
  Position = (301.8, 321.8) = 11 29 16.82 -4 24 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1959.2 +/- 53.7
  Background counts = 53.1
  Rate = 0.1 +/- 0.003

[Tue Aug  7 21:27:18 2012] Off-axis axis estimate = 1.71'
[Tue Aug  7 21:46:32 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 21:46:32 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Aug  7 21:46:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Tue Aug  7 21:46:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Aug  7 21:57:12 2012] fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug  7 21:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_src1.csv
[Tue Aug  7 21:57:12 2012] fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug  7 21:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_src1.csv
[Tue Aug  7 21:57:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 21:57:12 2012] fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug  7 21:57:12 2012] fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug  7 21:57:12 2012] Fit fullrun_mos2_xmm0556230701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug  7 21:57:17 2012] Spatial fit model total counts = 1535.580000, observed total counts = 1487.000000
[Tue Aug  7 21:57:17 2012] Offset between fit and detection position for source 1 = 0.178037 pixels
[Tue Aug  7 21:57:17 2012] 1538.391000 total counts/ 569.140000 bgd. counts: snr = 40.628118
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.178037 pixels
  Position = (301.6, 321.7) = 11 29 16.87 -4 24 8.3
  Extent = 5.1 (4.7-5.3)", rotation angle = 0
  Source counts = 969.3 +/- 39.2
  Background counts = 569.1
  Rate = 0.06 +/- 0.003
[Tue Aug  7 21:57:17 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 21:57:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 21:57:17 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 21:57:17 2012] Source does appear to be extended
[Tue Aug  7 21:57:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 22:11:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 22:11:36 2012] Initial guess for spatial extent in simple fitting = 5.09"
[Tue Aug  7 22:11:36 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.808
[Tue Aug  7 22:11:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.09"
[Tue Aug  7 22:22:28 2012] fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug  7 22:22:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 22:22:28 2012] fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug  7 22:22:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 22:22:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 22:22:28 2012] fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug  7 22:22:28 2012] fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug  7 22:22:28 2012] Fit fullrun_mos2_xmm0556230701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug  7 22:22:32 2012] Spatial fit model total counts = 1518.360000, observed total counts = 1485.000000
[Tue Aug  7 22:22:32 2012] Offset between fit and detection position for source 1 = 0.008583 pixels
[Tue Aug  7 22:22:32 2012] 1526.063000 total counts/ 560.358000 bgd. counts: snr = 40.795447
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008583 pixels
  Position = (301.6, 321.7) = 11 29 16.87 -4 24 8.3
  Extent = 5.1 (4.7-5.3)", rotation angle = 0
  Source counts = 965.7 +/- 39.1
  Background counts = 560.4
  Rate = 0.06 +/- 0.003
[Tue Aug  7 22:22:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 22:22:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 22:22:32 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 22:22:32 2012] Source does appear to be extended
[Tue Aug  7 22:22:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 23:21:46 2012] XMMSAS src. selection expression = ellipse(26189.516000, 27942.166000, 303.820209, 303.820209, 0.000000, X, Y)
[Tue Aug  7 23:21:46 2012] Writing source region out to fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug  7 23:21:46 2012] Extracting stamp from image fullrun_mos2_xmm0556230701_pi300-10000_cl_sm2.00.img.gz, (284, 304) - (319, 339)
[Tue Aug  7 23:21:46 2012] XMMSAS bgd. selection expression = annulus(26189.516000, 27942.166000, 506.367015, 1012.734029, X, Y)
[Tue Aug  7 23:21:46 2012] Writing fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1.gif
[Tue Aug  7 23:21:48 2012] Mean detx,y = (139.25, 128.06) 
[Tue Aug  7 23:21:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 23:21:56 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 23:21:56 2012] Setting source spectrum file to fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 23:21:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug  7 23:29:01 2012] Updating aperture counts using extracted products
[Tue Aug  7 23:29:01 2012] Error reading totcts from fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 23:29:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 23:29:01 2012] Using photon index=1.80, rate=0.0637, arf fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 23:29:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 23:29:01 2012] Updating source flux to 9e-13
[Tue Aug  7 23:29:26 2012] Reading fit data from xmm0556230701/analysis//spectral/fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug  7 23:29:26 2012] Spectral fit parameter nH value = 328339000000.0
[Tue Aug  7 23:29:26 2012] Spectral fit parameter PhoIndex value = 0.366745
[Tue Aug  7 23:29:26 2012] Failed to get F(0.3-8.0) from xmm0556230701/analysis//spectral/fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug  7 23:29:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 23:29:26 2012] Using Nh = 3.3e+11, photon index=0.37, rate=0.0637, arf fullrun_mos2_xmm0556230701_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 23:29:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 23:29:26 2012] Updating source flux to 1.9e-12