[Sun Jun 17 20:42:12 2012] Detection parameters:
  Position = (266.4, 426.7) = 9 48 26.18 55 28 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.4 +/- 8.2
  Background counts = 7.6
  Rate = 0.006 +/- 0.001

[Sun Jun 17 20:42:12 2012] Off-axis axis estimate = 9.59'
[Sun Jun 17 20:43:25 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 20:43:25 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Sun Jun 17 20:43:25 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Sun Jun 17 20:43:25 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.22"
[Sun Jun 17 21:08:46 2012] fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 17 21:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_src5.csv
[Sun Jun 17 21:08:46 2012] fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 17 21:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_src5.csv
[Sun Jun 17 21:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 21:08:46 2012] fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 17 21:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 17 21:08:46 2012] fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 17 21:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 17 21:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556214801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 21:34:30 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.518125 pixels away
[Sun Jun 17 21:34:30 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 21:34:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 21:34:30 2012] Assessing source extent using major
[Sun Jun 17 21:34:30 2012] Source does appear to be extended
[Sun Jun 17 21:34:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 21:34:40 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 21:34:40 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Sun Jun 17 21:34:41 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Sun Jun 17 21:34:41 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.22"
[Sun Jun 17 21:59:03 2012] fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 17 21:59:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_src5.csv
[Sun Jun 17 21:59:03 2012] fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 17 21:59:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_src5.csv
[Sun Jun 17 21:59:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 21:59:03 2012] fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 17 21:59:03 2012] fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 17 21:59:03 2012] Fit fullrun_pn_xmm0556214801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 17 22:24:36 2012] Spatial fit model total counts = 102.222000, observed total counts = 93.000000
[Sun Jun 17 22:24:36 2012] Offset between fit and detection position for source 5 = 0.228346 pixels
[Sun Jun 17 22:24:36 2012] 103.690700 total counts/ 76.016900 bgd. counts: snr = 3.174050
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.228346 pixels
  Position = (266.2, 426.7) = 9 48 26.30 55 28 22.8
  Extent = 4.4 (3.4-5.8)", rotation angle = 0
  Source counts = 27.7 +/- 10.2
  Background counts = 76.0
  Rate = 0.004 +/- 0.001
[Sun Jun 17 22:24:36 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 22:24:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 22:24:36 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 22:24:36 2012] Source does appear to be extended
[Sun Jun 17 22:24:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 22:24:45 2012] XMMSAS src. selection expression = ellipse(23108.972420, 37070.225200, 265.485008, 265.485008, 0.000000, X, Y)
[Sun Jun 17 22:24:45 2012] Writing source region out to fullrun_pn_xmm0556214801_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 17 22:24:45 2012] Extracting stamp from image fullrun_pn_xmm0556214801_pi300-10000_cl_sm2.00.img.gz, (251, 411) - (281, 442)
[Sun Jun 17 22:24:45 2012] XMMSAS bgd. selection expression = annulus(23108.972420, 37070.225200, 442.475013, 884.950025, X, Y) && !ellipse(22054.455000, 36493.750000, 1369.400039, 1369.400039, 0.000000, X, Y)
[Sun Jun 17 22:24:45 2012] Writing fullrun_pn_xmm0556214801_pi300-10000_pass1_cl_src5.gif
[Sun Jun 17 22:26:42 2012] Mean detx,y = (-2817.67, 12844.56) 
[Sun Jun 17 22:26:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 22:26:53 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 22:26:53 2012] Setting source spectrum file to fullrun_pn_xmm0556214801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 17 22:26:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556214801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 17 22:37:12 2012] Not generating rmf since there are only 27 counts
[Sun Jun 17 22:37:12 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:47:58 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:47:58 2012] Error reading totcts from fullrun_pn_xmm0556214801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 17 22:47:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:47:58 2012] Using photon index=1.80, rate=0.00395, arf fullrun_pn_xmm0556214801_pi300-10000_pass1_cl_src5.arf
[Sun Jun 17 22:47:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:47:58 2012] Updating source flux to 3.2e-14
[Sun Jun 17 22:48:02 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting