[Wed Nov 30 21:35:29 2011] Detection parameters:
  Position = (382.4, 325.3) = 17 22 8.57 59 52 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.5 +/- 10.5
  Background counts = 19.1
  Rate = 0.02 +/- 0.004

[Wed Nov 30 21:35:29 2011] Off-axis axis estimate = 6.39'
[Wed Nov 30 21:37:21 2011] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 21:37:21 2011] Initial guess for spatial extent in simple fitting = 9.62"
[Wed Nov 30 21:37:21 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.850
[Wed Nov 30 21:37:21 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 9.62"
[Wed Nov 30 21:48:44 2011] fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_src4.ximg exists
[Wed Nov 30 21:48:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_src4.csv
[Wed Nov 30 21:48:44 2011] fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Nov 30 21:48:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_src4.csv
[Wed Nov 30 21:48:44 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 21:48:44 2011] fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Nov 30 21:48:44 2011] fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Nov 30 21:48:44 2011] Fit fullrun_pn_xmm0556214101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Nov 30 22:24:20 2011] Spatial fit model total counts = 101.444000, observed total counts = 103.000000
[Wed Nov 30 22:24:20 2011] Offset between fit and detection position for source 4 = 1.165194 pixels
[Wed Nov 30 22:24:20 2011] 99.388830 total counts/ 0.838530 bgd. counts: snr = 107.621403
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.165194 pixels
  Position = (383.5, 325.6) = 17 22 7.92 59 52 41.6
  Extent = 19.2 (19.2-19.2)", rotation angle = 0
  Source counts = 98.6 +/- 10.0
  Background counts = 0.8
  Rate = 0.03 +/- 0.003
[Wed Nov 30 22:24:20 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 22:24:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 22:24:20 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 22:24:20 2011] Source does appear to be extended
[Wed Nov 30 22:24:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 22:24:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 22:24:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 22:24:37 2011] Initial guess for spatial extent in simple fitting = 19.24"
[Wed Nov 30 22:24:37 2011] source mask rpix=4.4, npix_max = 96, mask sum = 87, frac = 0.898
[Wed Nov 30 22:24:37 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 19.24"
[Wed Nov 30 22:36:28 2011] fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Nov 30 22:36:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_src4.csv
[Wed Nov 30 22:36:28 2011] fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Nov 30 22:36:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_src4.csv
[Wed Nov 30 22:36:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 22:36:28 2011] fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Nov 30 22:36:28 2011] fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Nov 30 22:36:28 2011] Fit fullrun_pn_xmm0556214101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Nov 30 23:04:35 2011] Warning, spatial fit 4 centroid is now closest to src. 3
[Wed Nov 30 23:04:35 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 23:04:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 23:04:35 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 23:04:35 2011] Source does appear to be extended
[Wed Nov 30 23:04:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 23:04:44 2011] XMMSAS src. selection expression = ellipse(33315.888400, 28280.443800, 1154.214033, 1154.214033, 0.000000, X, Y)
[Wed Nov 30 23:04:44 2011] Writing source region out to fullrun_pn_xmm0556214101_pi300-10000_pass1_cl_src4_src.reg
[Wed Nov 30 23:04:44 2011] Extracting stamp from image fullrun_pn_xmm0556214101_pi300-10000_cl_sm2.00.img.gz, (317, 259) - (450, 392)
[Wed Nov 30 23:04:44 2011] XMMSAS bgd. selection expression = annulus(33315.888400, 28280.443800, 1923.690055, 3847.380111, X, Y) && !ellipse(29512.415649, 31365.209259, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 23:04:44 2011] Writing fullrun_pn_xmm0556214101_pi300-10000_pass1_cl_src4.gif
[Wed Nov 30 23:06:05 2011] Mean detx,y = (-1467.17, 9184.02) 
[Wed Nov 30 23:06:08 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 23:07:05 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 23:07:06 2011] Setting source spectrum file to fullrun_pn_xmm0556214101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Nov 30 23:07:06 2011] Setting bgd. spectrum file to fullrun_pn_xmm0556214101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Nov 30 23:09:32 2011] Not generating rmf since there are only 98 counts
[Wed Nov 30 23:09:32 2011] rmf not generated due to insufficient counts
[Wed Nov 30 23:15:48 2011] Updating aperture counts using extracted products
[Wed Nov 30 23:15:48 2011] Error reading totcts from fullrun_pn_xmm0556214101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Nov 30 23:15:48 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 23:15:48 2011] Using photon index=1.80, rate=0.0297, arf fullrun_pn_xmm0556214101_pi300-10000_pass1_cl_src4.arf
[Wed Nov 30 23:15:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 23:15:48 2011] Updating source flux to 1.2e-13
[Wed Nov 30 23:15:52 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Nov 30 23:15:53 2011] xmm0556214101/analysis//spectral/fullrun_pn_xmm0556214101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete