[Tue Nov 29 06:03:10 2011] Detection parameters:
  Position = (305.1, 253.7) = 10 21 13.45 61 9 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.3 +/- 11.2
  Background counts = 22.9
  Rate = 0.009 +/- 0.002

[Tue Nov 29 06:03:10 2011] Off-axis axis estimate = 3.28'
[Tue Nov 29 06:07:54 2011] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 06:07:54 2011] Initial guess for spatial extent in simple fitting = 8.07"
[Tue Nov 29 06:07:54 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.767
[Tue Nov 29 06:07:54 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 8.07"
[Tue Nov 29 06:13:48 2011] fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_src3.ximg exists
[Tue Nov 29 06:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_src3.csv
[Tue Nov 29 06:13:48 2011] fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Nov 29 06:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_src3.csv
[Tue Nov 29 06:13:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 06:13:49 2011] fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Nov 29 06:13:49 2011] fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Nov 29 06:13:49 2011] Fit fullrun_mos1_xmm0556213901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Nov 29 06:22:23 2011] Source 3 is offset by 7.247030 and 0.484770 pixels which is larger than
2 X fitted extent = 0.927200 x 0.927200, not incorporating fit results
[Tue Nov 29 06:22:23 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 06:22:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 06:22:23 2011] Assessing source extent using major
[Tue Nov 29 06:22:23 2011] Source does appear to be extended
[Tue Nov 29 06:22:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 06:24:19 2011] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 06:24:19 2011] Initial guess for spatial extent in simple fitting = 8.07"
[Tue Nov 29 06:24:19 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.767
[Tue Nov 29 06:24:19 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 8.07"
[Tue Nov 29 06:31:49 2011] fullrun_mos1_xmm0556213901_pi300-10000_cl_pass1_src3.ximg exists
[Tue Nov 29 06:31:49 2011] fullrun_mos1_xmm0556213901_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Nov 29 06:31:49 2011] Fit fullrun_mos1_xmm0556213901_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Nov 29 06:31:49 2011] fullrun_mos1_xmm0556213901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Nov 29 06:31:49 2011] fullrun_mos1_xmm0556213901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Nov 29 06:31:49 2011] Fit fullrun_mos1_xmm0556213901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Nov 29 06:39:51 2011] Source 3 is offset by 7.522963 and 6.161605 pixels which is larger than
2 X fitted extent = 0.927200 x 0.927200, not incorporating fit results
[Tue Nov 29 06:39:51 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 06:39:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 06:39:51 2011] Assessing source extent using major
[Tue Nov 29 06:39:51 2011] Source does appear to be extended
[Tue Nov 29 06:39:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 06:41:32 2011] XMMSAS src. selection expression = ellipse(26495.667816, 22027.229614, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 06:41:32 2011] Writing source region out to fullrun_mos1_xmm0556213901_pi300-10000_pass1_cl_src3_src.reg
[Tue Nov 29 06:41:32 2011] Extracting stamp from image fullrun_mos1_xmm0556213901_pi300-10000_cl_sm2.00.img.gz, (268, 216) - (343, 291)
[Tue Nov 29 06:41:32 2011] XMMSAS bgd. selection expression = annulus(26495.667816, 22027.229614, 1087.500000, 2175.000000, X, Y)
[Tue Nov 29 06:41:32 2011] Writing fullrun_mos1_xmm0556213901_pi300-10000_pass1_cl_src3.gif
[Tue Nov 29 06:42:47 2011] Mean detx,y = (-5341.67, -1454.77) 
[Tue Nov 29 06:42:49 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:43:28 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:43:29 2011] Setting source spectrum file to fullrun_mos1_xmm0556213901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Nov 29 06:43:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0556213901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Nov 29 06:44:22 2011] Not generating rmf since there are only 61 counts
[Tue Nov 29 06:44:22 2011] rmf not generated due to insufficient counts
[Tue Nov 29 06:46:33 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:46:33 2011] Error reading totcts from fullrun_mos1_xmm0556213901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Nov 29 06:46:33 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:46:33 2011] Using photon index=1.80, rate=0.00936, arf fullrun_mos1_xmm0556213901_pi300-10000_pass1_cl_src3.arf
[Tue Nov 29 06:46:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:46:33 2011] Updating source flux to 1.1e-13
[Tue Nov 29 06:46:34 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Nov 29 06:46:35 2011] xmm0556213901/analysis//spectral/fullrun_mos1_xmm0556213901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete