[Tue Nov 29 02:21:23 2011] Detection parameters:
  Position = (228.5, 183.9) = 15 19 49.05 53 49 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.1 +/- 30.2
  Background counts = 428.3
  Rate = 0.02 +/- 0.004

[Tue Nov 29 02:21:26 2011] Off-axis axis estimate = 9.73'
[Tue Nov 29 02:31:24 2011] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:31:24 2011] Initial guess for spatial extent in simple fitting = 11.29"
[Tue Nov 29 02:31:24 2011] source mask rpix=2.6, npix_max = 38, mask sum = 25, frac = 0.652
[Tue Nov 29 02:31:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.29"
[Tue Nov 29 07:43:50 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src3.ximg exists
[Tue Nov 29 07:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src3.csv
[Tue Nov 29 07:43:50 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Nov 29 07:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src3.csv
[Tue Nov 29 07:43:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 07:43:51 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Nov 29 07:43:51 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Nov 29 07:43:51 2011] Fit fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Nov 29 08:24:39 2011] Spatial fit model total counts = 1516.410000, observed total counts = 1515.000000
[Tue Nov 29 08:24:39 2011] Offset between fit and detection position for source 4 = 9.389947 pixels
[Tue Nov 29 08:24:39 2011] 1494.700000 total counts/ 326.700000 bgd. counts: snr = 64.620197
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 9.389947 pixels
  Position = (237.9, 183.2) = 15 19 44.46 53 48 56.9
  Extent = 22.6 (22.6-22.6)", rotation angle = 0
  Source counts = 1168.0 +/- 38.7
  Background counts = 326.7
  Rate = 0.3 +/- 0.01
[Tue Nov 29 08:24:39 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 08:24:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 08:24:39 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 08:24:39 2011] Source does appear to be extended
[Tue Nov 29 08:24:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 08:24:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 08:24:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 08:24:56 2011] Initial guess for spatial extent in simple fitting = 22.58"
[Tue Nov 29 08:24:56 2011] source mask rpix=5.2, npix_max = 129, mask sum = 141, frac = 1.089
[Tue Nov 29 08:24:56 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 22.58"
[Tue Nov 29 14:22:29 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src3.ximg exists
[Tue Nov 29 14:22:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src3.csv
[Tue Nov 29 14:22:29 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Nov 29 14:22:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src3.csv
[Tue Nov 29 14:22:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 14:22:30 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Nov 29 14:22:30 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Nov 29 14:22:30 2011] Fit fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Nov 29 15:15:32 2011] Warning, spatial fit 3 centroid is now closest to src. 21
[Tue Nov 29 15:15:32 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 15:15:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 15:15:32 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 15:15:32 2011] Source does appear to be extended
[Tue Nov 29 15:15:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 15:15:48 2011] Counts = 1168.000000, rescaling region sizes by 2.000000
[Tue Nov 29 15:15:48 2011] XMMSAS src. selection expression = ellipse(20645.038000, 15886.255000, 2709.321677, 2709.321677, 0.000000, X, Y)
[Tue Nov 29 15:15:48 2011] Writing source region out to fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src4_src.reg
[Tue Nov 29 15:15:48 2011] Extracting stamp from image fullrun_pn_xmm0556213801_pi300-10000_cl_sm2.00.img.gz, (82, 27) - (394, 339)
[Tue Nov 29 15:15:48 2011] XMMSAS bgd. selection expression = annulus(20645.038000, 15886.255000, 9031.072256, 18062.144511, X, Y) && !ellipse(20618.476379, 18513.652786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.612000, 22545.084600, 1320.208038, 1320.208038, 0.000000, X, Y) && !ellipse(19317.596985, 10320.136131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18644.363861, 11358.574509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18384.468400, 10880.608000, 583.214417, 583.214417, 0.000000, X, Y) && !ellipse(19811.560000, 10865.842000, 1977.904057, 1977.904057, 0.000000, X, Y) && !ellipse(25044.620000, 23740.640000, 706.639220, 706.639220, 0.000000, X, Y) && !ellipse(26743.424000, 23194.782000, 1189.720034, 1189.720034, 0.000000, X, Y) && !ellipse(24314.830000, 23221.101319, 803.980345, 399.633415, 0.000000, X, Y) && !ellipse(27800.714000, 23276.789600, 1237.392036, 1237.392036, 0.000000, X, Y) && !ellipse(27358.480606, 22983.402337, 2623.040075, 569.929472, 14.140765, X, Y) && !ellipse(30895.446000, 22024.388200, 1442.944042, 1442.944042, 0.000000, X, Y) && !ellipse(32788.232000, 21141.754000, 1550.208045, 1550.208045, 0.000000, X, Y) && !ellipse(32673.323700, 21923.170411, 1550.208045, 1304.571513, 45.825213, X, Y) && !ellipse(30065.844000, 21154.028000, 700.857620, 700.857620, 0.000000, X, Y) && !ellipse(36922.026276, 18875.947464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21840.251831, 18169.108307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19963.468000, 14563.718000, 1276.248037, 1276.248037, 0.000000, X, Y) && !ellipse(19212.658279, 12234.169983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19373.067184, 11334.896957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18929.649414, 10994.769783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23488.624000, 24719.186000, 1425.608041, 1425.608041, 0.000000, X, Y) && !ellipse(25128.052000, 24436.259400, 1150.568033, 1150.568033, 0.000000, X, Y) && !ellipse(24357.356000, 24461.764000, 2559.728074, 2559.728074, 0.000000, X, Y) && !ellipse(26197.626000, 24125.376000, 1183.136034, 1183.136034, 0.000000, X, Y) && !ellipse(24725.118000, 23869.306000, 707.619220, 707.619220, 0.000000, X, Y) && !ellipse(26806.982000, 23767.614000, 2482.960071, 2482.960071, 0.000000, X, Y) && !ellipse(25734.739600, 23552.975000, 1181.568034, 689.955220, 28.336000, X, Y) && !ellipse(26309.937897, 23530.674469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22889.607025, 23594.955383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24144.580000, 23145.124000, 745.004821, 745.004821, 0.000000, X, Y) && !ellipse(27110.695800, 22010.567600, 1311.520038, 1311.520038, 0.000000, X, Y) && !ellipse(21650.954000, 19845.870600, 1514.056044, 1514.056044, 0.000000, X, Y) && !ellipse(23314.020000, 25039.376000, 1187.528034, 1187.528034, 0.000000, X, Y)
[Tue Nov 29 15:15:48 2011] Writing fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src4.gif
[Tue Nov 29 15:19:11 2011] Mean detx,y = (-12171.53, 110.55) 
[Tue Nov 29 15:19:19 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 15:33:04 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 15:33:05 2011] Setting source spectrum file to fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Nov 29 15:33:05 2011] Setting bgd. spectrum file to fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Nov 29 18:47:45 2011] Updating aperture counts using extracted products
[Tue Nov 29 18:47:45 2011] Error reading totcts from fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Nov 29 18:47:47 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 18:47:47 2011] Using photon index=1.80, rate=0.32, arf fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src4.arf
[Tue Nov 29 18:47:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 18:47:47 2011] Updating source flux to 1.5e-12
[Tue Nov 29 19:00:47 2011] xmm0556213801/analysis//spectral/fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete