[Tue Nov 29 02:21:25 2011] Detection parameters:
  Position = (215.7, 121.1) = 15 19 55.25 53 44 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.3 +/- 29.4
  Background counts = 266.6
  Rate = 0.02 +/- 0.003

[Tue Nov 29 02:21:26 2011] Off-axis axis estimate = 14.18'
[Tue Nov 29 02:31:24 2011] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:31:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 02:31:24 2011] Initial guess for spatial extent in simple fitting = 13.52"
[Tue Nov 29 02:31:24 2011] source mask rpix=3.1, npix_max = 52, mask sum = 44, frac = 0.845
[Tue Nov 29 02:31:24 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 13.52"
[Tue Nov 29 07:43:51 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src21.ximg exists
[Tue Nov 29 07:43:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src21.csv
[Tue Nov 29 07:43:51 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Nov 29 07:43:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src21.csv
[Tue Nov 29 07:43:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 07:43:52 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Nov 29 07:43:52 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Nov 29 07:43:52 2011] Fit fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Nov 29 08:24:39 2011] Spatial fit model total counts = 1959.410000, observed total counts = 1970.000000
[Tue Nov 29 08:24:39 2011] Offset between fit and detection position for source 22 = 3.088095 pixels
[Tue Nov 29 08:24:39 2011] Warning, changing simple spatial fit ID from 21 to 7
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.088095 pixels
  Position = (218.6, 122.2) = 15 19 53.83 53 44 31.6
  Extent = 26.8 (26.8-26.8)", rotation angle = 0
  Source counts = 1629.6 +/- 40.4
  Background counts = 0.0
  Rate = 0.4 +/- 0.01
 Deleting source due to low signal-to-noise ratio