[Tue Nov 29 02:21:23 2011] Detection parameters:
  Position = (329.5, 258.9) = 15 18 59.39 53 54 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 521.1 +/- 146.9
  Background counts = 460.7
  Rate = 0.06 +/- 0.02

[Tue Nov 29 02:21:26 2011] Off-axis axis estimate = 3.65'
[Tue Nov 29 02:31:24 2011] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:31:24 2011] Initial guess for spatial extent in simple fitting = 8.25"
[Tue Nov 29 02:31:24 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.740
[Tue Nov 29 02:31:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.25"
[Tue Nov 29 07:43:50 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Nov 29 07:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src1.csv
[Tue Nov 29 07:43:50 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Nov 29 07:43:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src1.csv
[Tue Nov 29 07:43:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 07:43:51 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Nov 29 07:43:51 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Nov 29 07:43:51 2011] Fit fullrun_pn_xmm0556213801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Nov 29 08:24:39 2011] Source 2 is offset by 5.760881 and 6.508613 pixels which is larger than
2 X fitted extent = 2.855214 x 2.855214, not incorporating fit results
[Tue Nov 29 08:24:39 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 08:24:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 08:24:39 2011] Assessing source extent using major
[Tue Nov 29 08:24:39 2011] Source does appear to be extended
[Tue Nov 29 08:24:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 08:24:56 2011] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 08:24:56 2011] Initial guess for spatial extent in simple fitting = 8.25"
[Tue Nov 29 08:24:56 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.740
[Tue Nov 29 08:24:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.25"
[Tue Nov 29 14:22:29 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src1.ximg exists
[Tue Nov 29 14:22:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src1.csv
[Tue Nov 29 14:22:29 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Nov 29 14:22:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src1.csv
[Tue Nov 29 14:22:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 14:22:29 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov 29 14:22:30 2011] fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov 29 14:22:30 2011] Fit fullrun_pn_xmm0556213801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov 29 15:15:32 2011] Spatial fit model total counts = 2408.790000, observed total counts = 2411.000000
[Tue Nov 29 15:15:32 2011] Offset between fit and detection position for source 2 = 3.973166 pixels
[Tue Nov 29 15:15:32 2011] 2297.576000 total counts/ 1755.840000 bgd. counts: snr = 12.928413
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.973166 pixels
  Position = (333.4, 259.7) = 15 18 57.47 53 54 30.0
  Extent = 16.5 (16.5-33.0)", rotation angle = 0
  Source counts = 541.7 +/- 47.9
  Background counts = 1755.8
  Rate = 0.1 +/- 0.01
[Tue Nov 29 15:15:32 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 15:15:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 15:15:32 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 15:15:32 2011] Source does appear to be extended
[Tue Nov 29 15:15:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 15:15:32 2011] Source is confused with source 14
[Tue Nov 29 15:15:48 2011] XMMSAS src. selection expression = ellipse(28959.612000, 22545.084600, 990.156028, 990.156028, 0.000000, X, Y)
[Tue Nov 29 15:15:48 2011] Writing source region out to fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src2_src.reg
[Tue Nov 29 15:15:48 2011] Extracting stamp from image fullrun_pn_xmm0556213801_pi300-10000_cl_sm2.00.img.gz, (277, 203) - (390, 317)
[Tue Nov 29 15:15:48 2011] XMMSAS bgd. selection expression = annulus(28959.612000, 22545.084600, 1650.260047, 3300.520095, X, Y) && !ellipse(25044.620000, 23740.640000, 706.639220, 706.639220, 0.000000, X, Y) && !ellipse(26743.424000, 23194.782000, 1189.720034, 1189.720034, 0.000000, X, Y) && !ellipse(27800.714000, 23276.789600, 1237.392036, 1237.392036, 0.000000, X, Y) && !ellipse(27358.480606, 22983.402337, 2623.040075, 569.929472, 14.140765, X, Y) && !ellipse(30895.446000, 22024.388200, 1442.944042, 1442.944042, 0.000000, X, Y) && !ellipse(32788.232000, 21141.754000, 1550.208045, 1550.208045, 0.000000, X, Y) && !ellipse(32673.323700, 21923.170411, 1550.208045, 1304.571513, 45.825213, X, Y) && !ellipse(30065.844000, 21154.028000, 700.857620, 700.857620, 0.000000, X, Y) && !ellipse(25128.052000, 24436.259400, 1150.568033, 1150.568033, 0.000000, X, Y) && !ellipse(24357.356000, 24461.764000, 2559.728074, 2559.728074, 0.000000, X, Y) && !ellipse(26197.626000, 24125.376000, 1183.136034, 1183.136034, 0.000000, X, Y) && !ellipse(26806.982000, 23767.614000, 2482.960071, 2482.960071, 0.000000, X, Y) && !ellipse(25734.739600, 23552.975000, 1181.568034, 689.955220, 28.336000, X, Y) && !ellipse(26309.937897, 23530.674469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27110.695800, 22010.567600, 1311.520038, 1311.520038, 0.000000, X, Y)
[Tue Nov 29 15:15:48 2011] Writing fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src2.gif
[Tue Nov 29 15:17:02 2011] Mean detx,y = (-3193.07, 5457.51) 
[Tue Nov 29 15:17:07 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 15:17:40 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 15:17:40 2011] Setting source spectrum file to fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Nov 29 15:17:40 2011] Setting bgd. spectrum file to fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Nov 29 18:47:45 2011] Updating aperture counts using extracted products
[Tue Nov 29 18:47:45 2011] Error reading totcts from fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Nov 29 18:47:47 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 18:47:47 2011] Using photon index=1.80, rate=0.148, arf fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src2.arf
[Tue Nov 29 18:47:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 18:47:47 2011] Updating source flux to 4.8e-13
[Tue Nov 29 18:50:36 2011] Flag b found in src. 2 procflags, skipping spectral fitting
[Tue Nov 29 18:50:36 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Nov 29 19:00:47 2011] xmm0556213801/analysis//spectral/fullrun_pn_xmm0556213801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete