[Sat Dec 17 05:00:25 2011] Detection parameters:
  Position = (288.9, 284.2) = 2 35 38.43 0 10 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.7 +/- 9.8
  Background counts = 4.6
  Rate = 0.005 +/- 0.0008

[Sat Dec 17 05:00:26 2011] Off-axis axis estimate = 1.24'
[Sat Dec 17 05:59:16 2011] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 05:59:16 2011] Initial guess for spatial extent in simple fitting = 7.05"
[Sat Dec 17 05:59:16 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Sat Dec 17 05:59:16 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.05"
[Sat Dec 17 06:20:31 2011] fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_src3.ximg exists
[Sat Dec 17 06:20:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_src3.csv
[Sat Dec 17 06:20:31 2011] fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Dec 17 06:20:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_src3.csv
[Sat Dec 17 06:20:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 06:20:32 2011] fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Dec 17 06:20:32 2011] fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Dec 17 06:20:32 2011] Fit fullrun_mos2_xmm0556213601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Dec 17 06:20:42 2011] Spatial fit model total counts = 142.812000, observed total counts = 143.000000
[Sat Dec 17 06:20:42 2011] Offset between fit and detection position for source 7 = 5.186950 pixels
[Sat Dec 17 06:20:42 2011] 146.302300 total counts/ 29.024300 bgd. counts: snr = 21.768859
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 5.186950 pixels
  Position = (283.8, 283.2) = 2 35 39.91 0 10 40.8
  Extent = 14.1 (13.9-28.2)", rotation angle = 0
  Source counts = 117.3 +/- 12.1
  Background counts = 29.0
  Rate = 0.01 +/- 0.001
[Sat Dec 17 06:20:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 06:20:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 06:20:42 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 06:20:42 2011] Source does appear to be extended
[Sat Dec 17 06:20:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 06:20:42 2011] Source is confused with source 9
[Sat Dec 17 07:12:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 07:12:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 07:12:44 2011] Initial guess for spatial extent in simple fitting = 14.10"
[Sat Dec 17 07:12:44 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.143
[Sat Dec 17 07:12:44 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 14.10"
[Sat Dec 17 07:36:43 2011] fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_src3.ximg exists
[Sat Dec 17 07:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_src3.csv
[Sat Dec 17 07:36:43 2011] fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Dec 17 07:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_src3.csv
[Sat Dec 17 07:36:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 07:36:43 2011] fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Dec 17 07:36:43 2011] fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Dec 17 07:36:43 2011] Fit fullrun_mos2_xmm0556213601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Dec 17 07:36:53 2011] Source 7 is offset by -5.170851 and -1.082078 pixels which is larger than
2 X fitted extent = 1.620874 x 1.620874, not incorporating fit results
[Sat Dec 17 07:36:53 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 07:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 07:36:53 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 07:36:53 2011] Source does appear to be extended
[Sat Dec 17 07:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 08:07:46 2011] XMMSAS src. selection expression = ellipse(24640.960000, 24591.548400, 845.934024, 845.934024, 0.000000, X, Y)
[Sat Dec 17 08:07:46 2011] Writing source region out to fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7_src.reg
[Sat Dec 17 08:07:46 2011] Extracting stamp from image fullrun_mos2_xmm0556213601_pi300-10000_cl_sm2.00.img.gz, (235, 235) - (332, 332)
[Sat Dec 17 08:07:46 2011] XMMSAS bgd. selection expression = annulus(24640.960000, 24591.548400, 1409.890041, 2819.780081, X, Y) && !ellipse(24361.304200, 24569.382600, 440.175213, 440.175213, 0.000000, X, Y) && !ellipse(25204.398600, 22080.116800, 351.250410, 226.592807, 198.800417, X, Y)
[Sat Dec 17 08:07:46 2011] Writing fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7.gif
[Sat Dec 17 08:08:08 2011] Mean detx,y = (330.55, -11.79) 
[Sat Dec 17 08:08:09 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 08:08:19 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 08:08:19 2011] Setting source spectrum file to fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec 17 08:08:19 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Dec 17 08:15:54 2011] Updating aperture counts using extracted products
[Sat Dec 17 08:15:54 2011] Error reading totcts from fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec 17 08:15:55 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 08:15:55 2011] Using photon index=1.80, rate=0.00976, arf fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7.arf
[Sat Dec 17 08:15:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 08:15:55 2011] Updating source flux to 1e-13
[Sat Dec 17 08:15:57 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Sat Dec 17 08:15:57 2011] Flag c found in src. 7 procflags, skipping spectral fitting
[Sat Dec 17 08:16:05 2011] Reading fit data from xmm0556213601/analysis//spectral/fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7_pl.csv
[Sat Dec 17 08:16:05 2011] Spectral fit parameter nH value = 1.53853e+21
[Sat Dec 17 08:16:05 2011] Spectral fit parameter PhoIndex value = 3.11935
[Sat Dec 17 08:16:05 2011] Failed to get F(0.3-8.0) from xmm0556213601/analysis//spectral/fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Sat Dec 17 08:16:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 08:16:05 2011] Using Nh = 1.5e+21, photon index=3.12, rate=0.00976, arf fullrun_mos2_xmm0556213601_pi300-10000_pass1_cl_src7.arf
[Sat Dec 17 08:16:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 08:16:05 2011] Updating source flux to 7.4e-14