[Tue Nov 29 06:22:18 2011] Detection parameters: Position = (452.6, 192.0) = 10 44 33.10 48 39 46.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 33.9 +/- 7.6 Background counts = 2.9 Rate = 0.003 +/- 0.0007 [Tue Nov 29 06:22:19 2011] Off-axis axis estimate = 13.59' [Tue Nov 29 07:47:57 2011] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting [Tue Nov 29 07:47:57 2011] Initial guess for spatial extent in simple fitting = 13.22" [Tue Nov 29 07:47:57 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978 [Tue Nov 29 07:47:57 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 13.22" [Tue Nov 29 08:16:47 2011] fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_src9.ximg exists [Tue Nov 29 08:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_src9.csv [Tue Nov 29 08:16:47 2011] fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_src9_1.ximg exists [Tue Nov 29 08:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_src9.csv [Tue Nov 29 08:16:47 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Nov 29 08:16:47 2011] fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Tue Nov 29 08:16:47 2011] fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Tue Nov 29 08:16:47 2011] Fit fullrun_mos2_xmm0556213401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Tue Nov 29 08:17:02 2011] Spatial fit model total counts = 74.842800, observed total counts = 75.000000 [Tue Nov 29 08:17:02 2011] Offset between fit and detection position for source 3 = 3.201372 pixels Spatial fit parameters: Offset between fit and detection position for source 3 = 3.201372 pixels Position = (454.7, 194.4) = 10 44 32.20 48 40 2.6 Extent = 17.4 (9.1-21.5)", rotation angle = 0 Source counts = 71.7 +/- 8.5 Background counts = 0.0 Rate = 0.007 +/- 0.0008 Deleting source due to low signal-to-noise ratio