[Sun May 27 09:44:09 2012] Detection parameters:
  Position = (322.7, 377.8) = 10 43 38.12 59 38 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.7 +/- 17.5
  Background counts = 51.3
  Rate = 0.03 +/- 0.004

[Sun May 27 09:44:10 2012] Off-axis axis estimate = 6.02'
[Sun May 27 09:45:34 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Sun May 27 09:45:34 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Sun May 27 09:45:34 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.877
[Sun May 27 09:45:34 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.44"
[Sun May 27 10:03:16 2012] fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 27 10:03:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_src3.csv
[Sun May 27 10:03:16 2012] fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 27 10:03:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_src3.csv
[Sun May 27 10:03:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 10:03:16 2012] fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 27 10:03:16 2012] fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 27 10:03:16 2012] Fit fullrun_pn_xmm0556212901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May 27 10:31:11 2012] Spatial fit model total counts = 156.012000, observed total counts = 156.000000
[Sun May 27 10:31:11 2012] Offset between fit and detection position for source 3 = 0.477648 pixels
[Sun May 27 10:31:11 2012] 112.911900 total counts/ 83.212900 bgd. counts: snr = 3.255716
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.477648 pixels
  Position = (322.2, 377.9) = 10 43 38.39 59 38 18.0
  Extent = 5.7 (4.2-8.0)", rotation angle = 0
  Source counts = 29.7 +/- 10.6
  Background counts = 83.2
  Rate = 0.006 +/- 0.002
[Sun May 27 10:31:11 2012] Vigneting correction estimate = 1.000000
[Sun May 27 10:31:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 10:31:11 2012] Assessing source extent using major axis lower bound
[Sun May 27 10:31:11 2012] Source does appear to be extended
[Sun May 27 10:31:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 10:31:11 2012] Source is confused with source 6
[Sun May 27 10:31:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 10:31:20 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Sun May 27 10:31:20 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.210
[Sun May 27 10:31:20 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.73"
[Sun May 27 10:50:42 2012] fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 27 10:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_src3.csv
[Sun May 27 10:50:42 2012] fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 27 10:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_src3.csv
[Sun May 27 10:50:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 10:50:42 2012] fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 27 10:50:42 2012] fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 27 10:50:42 2012] Fit fullrun_pn_xmm0556212901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 27 11:16:08 2012] Warning, spatial fit 3 centroid is now closest to src. 6
[Sun May 27 11:16:08 2012] Vigneting correction estimate = 1.000000
[Sun May 27 11:16:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 11:16:08 2012] Assessing source extent using major axis lower bound
[Sun May 27 11:16:08 2012] Source does appear to be extended
[Sun May 27 11:16:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 11:16:23 2012] XMMSAS src. selection expression = ellipse(27982.015800, 32828.012200, 344.022010, 344.022010, 0.000000, X, Y)
[Sun May 27 11:16:23 2012] Writing source region out to fullrun_pn_xmm0556212901_pi300-10000_pass1_cl_src3_src.reg
[Sun May 27 11:16:23 2012] Extracting stamp from image fullrun_pn_xmm0556212901_pi300-10000_cl_sm2.00.img.gz, (302, 358) - (342, 398)
[Sun May 27 11:16:23 2012] XMMSAS bgd. selection expression = annulus(27982.015800, 32828.012200, 573.370016, 1146.740033, X, Y) && !ellipse(28312.907000, 32843.572800, 670.711219, 670.711219, 0.000000, X, Y)
[Sun May 27 11:16:23 2012] Writing fullrun_pn_xmm0556212901_pi300-10000_pass1_cl_src3.gif
[Sun May 27 11:17:46 2012] Mean detx,y = (-5209.22, 7387.44) 
[Sun May 27 11:17:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 11:18:14 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 11:18:14 2012] Setting source spectrum file to fullrun_pn_xmm0556212901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 27 11:18:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556212901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 27 11:25:33 2012] Not generating rmf since there are only 29 counts
[Sun May 27 11:25:33 2012] rmf not generated due to insufficient counts
[Sun May 27 11:34:54 2012] Updating aperture counts using extracted products
[Sun May 27 11:34:54 2012] Error reading totcts from fullrun_pn_xmm0556212901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 27 11:34:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 11:34:54 2012] Using photon index=1.80, rate=0.00645, arf fullrun_pn_xmm0556212901_pi300-10000_pass1_cl_src3.arf
[Sun May 27 11:34:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 11:34:54 2012] Updating source flux to 3.2e-14
[Sun May 27 11:34:58 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sun May 27 11:34:58 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 27 11:34:59 2012] xmm0556212901/analysis//spectral/fullrun_pn_xmm0556212901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete