[Sun May 27 09:44:26 2012] Detection parameters: Position = (267.0, 154.0) = 10 44 9.91 59 22 3.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 58.0 +/- 10.4 Background counts = 9.8 Rate = 0.01 +/- 0.002 [Sun May 27 09:44:26 2012] Off-axis axis estimate = 10.72' [Sun May 27 10:03:16 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting [Sun May 27 10:03:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 27 10:03:16 2012] Initial guess for spatial extent in simple fitting = 11.79" [Sun May 27 10:03:16 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.874 [Sun May 27 10:03:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.79" [Sun May 27 10:15:20 2012] fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_src1.ximg exists [Sun May 27 10:15:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_src1.csv [Sun May 27 10:15:20 2012] fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_src1_1.ximg exists [Sun May 27 10:15:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_src1.csv [Sun May 27 10:15:20 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 27 10:15:20 2012] fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sun May 27 10:15:20 2012] fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sun May 27 10:15:20 2012] Fit fullrun_mos1_xmm0556212901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sun May 27 10:31:12 2012] Spatial fit model total counts = 184.820000, observed total counts = 185.000000 [Sun May 27 10:31:12 2012] Offset between fit and detection position for source 5 = 0.293224 pixels [Sun May 27 10:31:12 2012] 182.768200 total counts/ 139.232000 bgd. counts: snr = 3.689614 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.293224 pixels Position = (267.3, 154.1) = 10 44 9.75 59 22 4.5 Extent = 6.2 (4.5-8.5)", rotation angle = 0 Source counts = 43.5 +/- 13.5 Background counts = 139.2 Rate = 0.004 +/- 0.001 [Sun May 27 10:31:12 2012] Vigneting correction estimate = 1.000000 [Sun May 27 10:31:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 27 10:31:12 2012] Assessing source extent using major axis lower bound [Sun May 27 10:31:12 2012] Source does appear to be extended [Sun May 27 10:31:12 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 27 10:50:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 27 10:50:42 2012] Initial guess for spatial extent in simple fitting = 6.24" [Sun May 27 10:50:42 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.070 [Sun May 27 10:50:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.24" [Sun May 27 11:00:26 2012] fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_src1.ximg exists [Sun May 27 11:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_src1.csv [Sun May 27 11:00:26 2012] fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_src1_1.ximg exists [Sun May 27 11:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_src1.csv [Sun May 27 11:00:26 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 27 11:00:26 2012] fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sun May 27 11:00:26 2012] fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sun May 27 11:00:26 2012] Fit fullrun_mos1_xmm0556212901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sun May 27 11:16:10 2012] Warning, spatial fit 1 centroid is now closest to src. 7 [Sun May 27 11:16:10 2012] Source 1 in spatial fitting is no longer close to this source [Sun May 27 11:16:10 2012] Vigneting correction estimate = 1.000000 [Sun May 27 11:16:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 27 11:16:10 2012] Assessing source extent using major axis lower bound [Sun May 27 11:16:10 2012] Source does appear to be extended [Sun May 27 11:16:10 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 27 11:27:32 2012] XMMSAS src. selection expression = ellipse(23204.654800, 13358.005000, 374.242211, 374.242211, 0.000000, X, Y) [Sun May 27 11:27:32 2012] Writing source region out to fullrun_mos1_xmm0556212901_pi300-10000_pass1_cl_src5_src.reg [Sun May 27 11:27:32 2012] Extracting stamp from image fullrun_mos1_xmm0556212901_pi300-10000_cl_sm2.00.img.gz, (246, 133) - (289, 176) [Sun May 27 11:27:32 2012] XMMSAS bgd. selection expression = annulus(23204.654800, 13358.005000, 623.737018, 1247.474036, X, Y) [Sun May 27 11:27:32 2012] Writing fullrun_mos1_xmm0556212901_pi300-10000_pass1_cl_src5.gif [Sun May 27 11:27:35 2012] Mean detx,y = (9708.52, 5095.92) [Sun May 27 11:27:36 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 27 11:27:44 2012] Binned source spectrum to 10 counts/bin [Sun May 27 11:27:45 2012] Setting source spectrum file to fullrun_mos1_xmm0556212901_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Sun May 27 11:27:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556212901_pi300-10000_pass1_cl_src5_bgd.pi.gz [Sun May 27 11:29:19 2012] Not generating rmf since there are only 43 counts [Sun May 27 11:29:19 2012] rmf not generated due to insufficient counts [Sun May 27 11:34:54 2012] Updating aperture counts using extracted products [Sun May 27 11:34:54 2012] Error reading totcts from fullrun_mos1_xmm0556212901_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Sun May 27 11:34:54 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 27 11:34:54 2012] Using photon index=1.80, rate=0.00431, arf fullrun_mos1_xmm0556212901_pi300-10000_pass1_cl_src5.arf [Sun May 27 11:34:54 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 27 11:34:54 2012] Updating source flux to 8.5e-14 [Sun May 27 11:34:56 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting [Sun May 27 11:34:57 2012] xmm0556212901/analysis//spectral/fullrun_mos1_xmm0556212901_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete