[Tue Jun  4 01:00:02 2013] Detection parameters:
  Position = (493.6, 357.7) = 9 11 4.28 42 5 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.8 +/- 6.0
  Background counts = 2.7
  Rate = 0.003 +/- 0.0007

[Tue Jun  4 01:00:02 2013] Off-axis axis estimate = 14.78'
[Tue Jun  4 02:07:17 2013] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 02:07:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  4 02:07:17 2013] Initial guess for spatial extent in simple fitting = 13.82"
[Tue Jun  4 02:07:17 2013] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.906
[Tue Jun  4 02:07:17 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.82"
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jun  4 02:36:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src10.csv
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jun  4 02:36:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src10.csv
[Tue Jun  4 02:36:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun  4 02:36:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun  4 02:36:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun  4 02:36:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 02:37:04 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 18.616735 pixels away
[Tue Jun  4 02:37:04 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 02:37:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 02:37:04 2013] Assessing source extent using major
[Tue Jun  4 02:37:04 2013] Source does appear to be extended
[Tue Jun  4 02:37:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 03:34:18 2013] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 03:34:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  4 03:34:18 2013] Initial guess for spatial extent in simple fitting = 13.82"
[Tue Jun  4 03:34:18 2013] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.906
[Tue Jun  4 03:34:18 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 13.82"
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jun  4 03:59:11 2013] Fit fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jun  4 03:59:11 2013] Fit fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Jun  4 03:59:25 2013] Spatial fit model total counts = 44.044600, observed total counts = 41.000000
[Tue Jun  4 03:59:25 2013] Offset between fit and detection position for source 7 = 0.308670 pixels
[Tue Jun  4 03:59:25 2013] 42.710600 total counts/ 26.682600 bgd. counts: snr = 3.102882
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.308670 pixels
  Position = (493.2, 357.6) = 9 11 4.40 42 5 52.8
  Extent = 5.8 (3.9-10.1)", rotation angle = 90 (46-303) degrees
  Source counts = 16.0 +/- 6.5
  Background counts = 26.7
  Rate = 0.002 +/- 0.0008
[Tue Jun  4 03:59:25 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 03:59:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 03:59:25 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 03:59:25 2013] Source does appear to be extended
[Tue Jun  4 03:59:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.84
[Tue Jun  4 04:30:00 2013] XMMSAS src. selection expression = ellipse(42863.672400, 31064.004000, 350.520610, 207.299406, 89.825044, X, Y)
[Tue Jun  4 04:30:00 2013] Writing source region out to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src7_src.reg
[Tue Jun  4 04:30:00 2013] Extracting stamp from image fullrun_mos2_xmm0556212801_pi300-10000_cl_sm2.00.img.gz, (473, 337) - (513, 378)
[Tue Jun  4 04:30:00 2013] XMMSAS bgd. selection expression = annulus(42863.672400, 31064.004000, 584.201017, 1168.402034, X, Y)
[Tue Jun  4 04:30:00 2013] Writing fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src7.gif
[Tue Jun  4 04:33:16 2013] Mean detx,y = (-16454.59, 64.76) 
[Tue Jun  4 04:33:18 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 04:33:38 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 04:33:39 2013] Setting source spectrum file to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jun  4 04:33:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jun  4 04:35:28 2013] Not generating rmf since there are only 16 counts
[Tue Jun  4 04:35:28 2013] rmf not generated due to insufficient counts
[Tue Jun  4 04:36:16 2013] Updating aperture counts using extracted products
[Tue Jun  4 04:36:16 2013] Total counts from fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 17.00
[Tue Jun  4 04:36:16 2013] Total counts from fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src7_bgd.pi.gz = 36.00
[Tue Jun  4 04:36:16 2013] Got source and background scale factors 230400.000000, 2231170.000000
[Tue Jun  4 04:36:16 2013] User source parameters:
  Position = (493.2, 357.6) = 9 11 4.40 42 5 52.8
  Extent = 5.8 (3.9-10.1)", rotation angle = 90 (46-303) degrees
  Source aperture counts = 13.3 +/- 5.2
  Background aperture counts = 3.7
  Rate = 0.002 +/- 0.0006

[Tue Jun  4 04:36:17 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 04:36:17 2013] Using photon index=1.80, rate=0.00187, arf fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src7.arf
[Tue Jun  4 04:36:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 04:36:18 2013] Updating source flux to 6.8e-14
[Tue Jun  4 04:36:20 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun  4 04:36:21 2013] xmm0556212801/analysis//spectral/fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete