[Tue Jun  4 01:00:02 2013] Detection parameters:
  Position = (435.3, 168.0) = 9 11 27.22 41 52 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17.8 +/- 5.3
  Background counts = 2.9
  Rate = 0.002 +/- 0.0006

[Tue Jun  4 01:00:02 2013] Off-axis axis estimate = 13.71'
[Tue Jun  4 02:07:17 2013] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 02:07:17 2013] Initial guess for spatial extent in simple fitting = 13.28"
[Tue Jun  4 02:07:17 2013] source mask rpix=3.1, npix_max = 50, mask sum = 46, frac = 0.911
[Tue Jun  4 02:07:17 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 13.28"
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jun  4 02:36:49 2013] Fit fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src12 appears to have run properly
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jun  4 02:36:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jun  4 02:36:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue Jun  4 02:36:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 02:37:04 2013] Spatial fit model total counts = 34.610600, observed total counts = 32.000000
[Tue Jun  4 02:37:04 2013] Offset between fit and detection position for source 11 = 0.897687 pixels
[Tue Jun  4 02:37:04 2013] 34.836800 total counts/ 15.872800 bgd. counts: snr = 4.759959
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.897687 pixels
  Position = (436.0, 168.6) = 9 11 26.96 41 52 11.5
  Extent = 11.0 (7.5-16.0)", rotation angle = 333 (318-345) degrees
  Source counts = 19.0 +/- 5.9
  Background counts = 15.9
  Rate = 0.002 +/- 0.0007
[Tue Jun  4 02:37:04 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 02:37:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 02:37:04 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 02:37:04 2013] Source does appear to be extended
[Tue Jun  4 02:37:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.78
[Tue Jun  4 02:37:04 2013] Source is asymmetric
[Tue Jun  4 03:34:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  4 03:34:18 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Tue Jun  4 03:34:18 2013] source mask rpix=1.6, npix_max = 18, mask sum = 19, frac = 1.031
[Tue Jun  4 03:34:18 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.16"
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jun  4 03:59:11 2013] Fit fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src12 appears to have run properly
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jun  4 03:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jun  4 03:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Jun  4 03:59:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 03:59:25 2013] Spatial fit model total counts = 30.024300, observed total counts = 29.000000
[Tue Jun  4 03:59:25 2013] Offset between fit and detection position for source 11 = 0.043289 pixels
[Tue Jun  4 03:59:25 2013] 30.418100 total counts/ 12.712900 bgd. counts: snr = 4.965678
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.043289 pixels
  Position = (436.0, 168.6) = 9 11 26.98 41 52 11.4
  Extent = 9.4 (6.4-14.3)" x 2.2 (1.8-3.1)", rotation angle = 149 (138-159) degrees
  Source counts = 17.7 +/- 5.5
  Background counts = 12.7
  Rate = 0.002 +/- 0.0006
[Tue Jun  4 03:59:25 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 03:59:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 03:59:25 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 03:59:25 2013] Source does appear to be extended
[Tue Jun  4 03:59:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.09
[Tue Jun  4 03:59:25 2013] Source is asymmetric
[Tue Jun  4 04:30:01 2013] XMMSAS src. selection expression = ellipse(37881.771516, 14620.690400, 561.186016, 132.373204, 148.991776, X, Y)
[Tue Jun  4 04:30:01 2013] Writing source region out to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src11_src.reg
[Tue Jun  4 04:30:01 2013] Extracting stamp from image fullrun_mos2_xmm0556212801_pi300-10000_cl_sm2.00.img.gz, (404, 136) - (468, 201)
[Tue Jun  4 04:30:01 2013] XMMSAS bgd. selection expression = annulus(37881.771516, 14620.690400, 935.310027, 1870.620054, X, Y)
[Tue Jun  4 04:30:01 2013] Writing fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src11.gif
[Tue Jun  4 04:34:10 2013] Mean detx,y = (-8299.40, -15086.60) 
[Tue Jun  4 04:34:12 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 04:34:37 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 04:34:37 2013] Setting source spectrum file to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jun  4 04:34:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jun  4 04:35:42 2013] Not generating rmf since there are only 17 counts
[Tue Jun  4 04:35:42 2013] rmf not generated due to insufficient counts
[Tue Jun  4 04:36:17 2013] Updating aperture counts using extracted products
[Tue Jun  4 04:36:17 2013] Total counts from fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 10.00
[Tue Jun  4 04:36:17 2013] Total counts from fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src11_bgd.pi.gz = 66.00
[Tue Jun  4 04:36:17 2013] Got source and background scale factors 162325.000000, 4065519.000000
[Tue Jun  4 04:36:17 2013] User source parameters:
  Position = (436.0, 168.6) = 9 11 26.98 41 52 11.4
  Extent = 9.4 (6.4-14.3)" x 2.2 (1.8-3.1)", rotation angle = 149 (138-159) degrees
  Source aperture counts = 7.4 +/- 4.3
  Background aperture counts = 2.6
  Rate = 0.0009 +/- 0.0005

[Tue Jun  4 04:36:18 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 04:36:18 2013] Using photon index=1.80, rate=0.00206, arf fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src11.arf
[Tue Jun  4 04:36:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 04:36:18 2013] Updating source flux to 5.5e-13
[Tue Jun  4 04:36:20 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun  4 04:36:21 2013] xmm0556212801/analysis//spectral/fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete