[Tue Jun  4 01:00:02 2013] Detection parameters:
  Position = (392.9, 250.8) = 9 11 43.68 41 58 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.7 +/- 8.2
  Background counts = 2.8
  Rate = 0.007 +/- 0.001

[Tue Jun  4 01:00:02 2013] Off-axis axis estimate = 7.67'
[Tue Jun  4 02:07:17 2013] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 02:07:17 2013] Initial guess for spatial extent in simple fitting = 10.27"
[Tue Jun  4 02:07:17 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Tue Jun  4 02:07:17 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.27"
[Tue Jun  4 02:36:48 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun  4 02:36:48 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun  4 02:36:49 2013] Fit fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun  4 02:36:49 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun  4 02:36:49 2013] Fit fullrun_mos2_xmm0556212801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun  4 02:37:04 2013] Spatial fit model total counts = 64.469200, observed total counts = 63.000000
[Tue Jun  4 02:37:04 2013] Offset between fit and detection position for source 10 = 0.156599 pixels
[Tue Jun  4 02:37:04 2013] 64.630700 total counts/ 35.739300 bgd. counts: snr = 4.832764
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.156599 pixels
  Position = (392.9, 250.6) = 9 11 43.69 41 58 8.4
  Extent = 5.5 (4.1-7.5)", rotation angle = 0
  Source counts = 28.9 +/- 8.0
  Background counts = 35.7
  Rate = 0.003 +/- 0.0009
[Tue Jun  4 02:37:04 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 02:37:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 02:37:04 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 02:37:04 2013] Source does appear to be extended
[Tue Jun  4 02:37:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 03:34:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  4 03:34:18 2013] Initial guess for spatial extent in simple fitting = 5.46"
[Tue Jun  4 03:34:18 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.974
[Tue Jun  4 03:34:18 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.46"
[Tue Jun  4 03:59:10 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun  4 03:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src2.csv
[Tue Jun  4 03:59:10 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun  4 03:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src2.csv
[Tue Jun  4 03:59:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun  4 03:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun  4 03:59:11 2013] fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun  4 03:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun  4 03:59:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556212801_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 03:59:25 2013] Warning, spatial fit 2 centroid is now closest to src. 8
[Tue Jun  4 03:59:25 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 03:59:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 03:59:25 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 03:59:25 2013] Source does appear to be extended
[Tue Jun  4 03:59:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 04:30:00 2013] XMMSAS src. selection expression = ellipse(34135.480720, 21753.184600, 327.527409, 327.527409, 0.000000, X, Y)
[Tue Jun  4 04:30:00 2013] Writing source region out to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun  4 04:30:00 2013] Extracting stamp from image fullrun_mos2_xmm0556212801_pi300-10000_cl_sm2.00.img.gz, (374, 232) - (412, 269)
[Tue Jun  4 04:30:00 2013] XMMSAS bgd. selection expression = annulus(34135.480720, 21753.184600, 545.879016, 1091.758031, X, Y)
[Tue Jun  4 04:30:00 2013] Writing fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src10.gif
[Tue Jun  4 04:30:25 2013] Mean detx,y = (-6039.69, -7321.20) 
[Tue Jun  4 04:30:28 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 04:30:40 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 04:30:41 2013] Setting source spectrum file to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun  4 04:30:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun  4 04:34:46 2013] Not generating rmf since there are only 28 counts
[Tue Jun  4 04:34:46 2013] rmf not generated due to insufficient counts
[Tue Jun  4 04:36:14 2013] Updating aperture counts using extracted products
[Tue Jun  4 04:36:14 2013] Total counts from fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 35.00
[Tue Jun  4 04:36:14 2013] Total counts from fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src10_bgd.pi.gz = 32.00
[Tue Jun  4 04:36:14 2013] Got source and background scale factors 336000.000000, 2350440.000000
[Tue Jun  4 04:36:14 2013] User source parameters:
  Position = (392.9, 250.6) = 9 11 43.69 41 58 8.4
  Extent = 5.5 (4.1-7.5)", rotation angle = 0
  Source aperture counts = 30.4 +/- 7.0
  Background aperture counts = 4.6
  Rate = 0.004 +/- 0.0008

[Tue Jun  4 04:36:17 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 04:36:17 2013] Using photon index=1.80, rate=0.00337, arf fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src10.arf
[Tue Jun  4 04:36:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 04:36:17 2013] Updating source flux to 6.2e-14
[Tue Jun  4 04:36:20 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun  4 04:36:21 2013] xmm0556212801/analysis//spectral/fullrun_mos2_xmm0556212801_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete