[Wed Mar  7 14:46:36 2012] Detection parameters:
  Position = (380.5, 398.1) = 0 31 14.35 13 54 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 389.9 +/- 23.5
  Background counts = 12.2
  Rate = 0.05 +/- 0.003

[Wed Mar  7 14:46:36 2012] Off-axis axis estimate = 9.36'
[Wed Mar  7 14:49:02 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 14:49:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 14:49:02 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Wed Mar  7 14:49:02 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.126
[Wed Mar  7 14:49:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.11"
[Wed Mar  7 15:19:45 2012] fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar  7 15:19:45 2012] fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar  7 15:19:45 2012] Fit fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Mar  7 15:19:45 2012] fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 15:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar  7 15:19:45 2012] fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 15:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar  7 15:19:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556212201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 15:54:24 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Wed Mar  7 15:54:24 2012] Spatial fit model total counts = 381.740000, observed total counts = 341.000000
[Wed Mar  7 15:54:24 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar  7 15:54:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 15:54:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 15:54:24 2012] Assessing source extent using major
[Wed Mar  7 15:54:24 2012] Source does appear to be extended
[Wed Mar  7 15:54:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 15:54:40 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 15:54:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 15:54:40 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Wed Mar  7 15:54:40 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.126
[Wed Mar  7 15:54:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.11"
[Wed Mar  7 16:26:15 2012] fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 16:26:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 16:26:15 2012] fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 16:26:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 16:26:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 16:26:16 2012] fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 16:26:16 2012] fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 16:26:16 2012] Fit fullrun_pn_xmm0556212201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 17:01:24 2012] Spatial fit model total counts = 570.372000, observed total counts = 527.000000
[Wed Mar  7 17:01:24 2012] Offset between fit and detection position for source 1 = 0.232263 pixels
[Wed Mar  7 17:01:24 2012] 570.429000 total counts/ 301.473000 bgd. counts: snr = 15.490200
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.232263 pixels
  Position = (380.3, 398.1) = 0 31 14.42 13 54 34.8
  Extent = 5.9 (5.4-6.6)", rotation angle = 0
  Source counts = 269.0 +/- 23.9
  Background counts = 301.5
  Rate = 0.04 +/- 0.003
[Wed Mar  7 17:01:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 17:01:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 17:01:24 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 17:01:24 2012] Source does appear to be extended
[Wed Mar  7 17:01:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 17:01:39 2012] XMMSAS src. selection expression = ellipse(33033.928600, 34582.619400, 353.928610, 353.928610, 0.000000, X, Y)
[Wed Mar  7 17:01:39 2012] Writing source region out to fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar  7 17:01:39 2012] Extracting stamp from image fullrun_pn_xmm0556212201_pi300-10000_cl_sm2.00.img.gz, (360, 378) - (401, 418)
[Wed Mar  7 17:01:39 2012] XMMSAS bgd. selection expression = annulus(33033.928600, 34582.619400, 589.881017, 1179.762034, X, Y) && !ellipse(32532.997345, 35098.026459, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 17:01:39 2012] Writing fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1.gif
[Wed Mar  7 17:01:49 2012] Mean detx,y = (-4292.36, 12211.04) 
[Wed Mar  7 17:01:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 17:02:07 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 17:02:07 2012] Setting source spectrum file to fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 17:02:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar  7 17:35:43 2012] Updating aperture counts using extracted products
[Wed Mar  7 17:35:43 2012] Error reading totcts from fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 17:35:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 17:35:44 2012] Using photon index=1.80, rate=0.0384, arf fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 17:35:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 17:35:44 2012] Updating source flux to 2.7e-13
[Wed Mar  7 17:36:16 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Mar  7 17:36:38 2012] Reading fit data from xmm0556212201/analysis//spectral/fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar  7 17:36:38 2012] Spectral fit parameter nH value = 1.0981e+21
[Wed Mar  7 17:36:38 2012] Spectral fit parameter PhoIndex value = 1.86414
[Wed Mar  7 17:36:38 2012] Failed to get F(0.3-8.0) from xmm0556212201/analysis//spectral/fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 17:36:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 17:36:38 2012] Using Nh = 1.1e+21, photon index=1.86, rate=0.0384, arf fullrun_pn_xmm0556212201_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 17:36:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 17:36:38 2012] Updating source flux to 3.3e-13