[Mon Feb 13 20:16:23 2012] Detection parameters:
  Position = (311.4, 445.0) = 16 52 29.00 35 45 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.1 +/- 20.5
  Background counts = 15.8
  Rate = 0.04 +/- 0.003

[Mon Feb 13 20:16:23 2012] Off-axis axis estimate = 10.66'
[Mon Feb 13 20:41:24 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 20:41:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 20:41:24 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Mon Feb 13 20:41:24 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023
[Mon Feb 13 20:41:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.76"
[Mon Feb 13 20:51:29 2012] fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 13 20:51:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 20:51:29 2012] fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 13 20:51:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 20:51:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 20:51:29 2012] fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 13 20:51:29 2012] fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 13 20:51:29 2012] Fit fullrun_mos2_xmm0556211901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 13 20:51:34 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Mon Feb 13 20:51:34 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.958442 pixels away
[Mon Feb 13 20:51:34 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 20:51:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 20:51:34 2012] Assessing source extent using major
[Mon Feb 13 20:51:34 2012] Source does appear to be extended
[Mon Feb 13 20:51:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 21:11:42 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 21:11:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 21:11:42 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Mon Feb 13 21:11:42 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023
[Mon Feb 13 21:11:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.76"
[Mon Feb 13 21:23:07 2012] fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 13 21:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 21:23:07 2012] fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 13 21:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 21:23:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 21:23:08 2012] fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 13 21:23:08 2012] fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 13 21:23:08 2012] Fit fullrun_mos2_xmm0556211901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 13 21:23:13 2012] Spatial fit model total counts = 317.275000, observed total counts = 317.000000
[Mon Feb 13 21:23:13 2012] Offset between fit and detection position for source 3 = 0.203862 pixels
[Mon Feb 13 21:23:13 2012] 313.667000 total counts/ 212.724000 bgd. counts: snr = 6.920986
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.203862 pixels
  Position = (311.2, 444.8) = 16 52 29.05 35 45 15.7
  Extent = 5.7 (4.7-7.1)", rotation angle = 0
  Source counts = 100.9 +/- 17.7
  Background counts = 212.7
  Rate = 0.02 +/- 0.004
[Mon Feb 13 21:23:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 21:23:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 21:23:13 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 21:23:13 2012] Source does appear to be extended
[Mon Feb 13 21:23:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 21:33:45 2012] XMMSAS src. selection expression = ellipse(27027.309440, 38650.388200, 344.797210, 344.797210, 0.000000, X, Y)
[Mon Feb 13 21:33:45 2012] Writing source region out to fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3_src.reg
[Mon Feb 13 21:33:45 2012] Extracting stamp from image fullrun_mos2_xmm0556211901_pi300-10000_cl_sm2.00.img.gz, (291, 425) - (331, 465)
[Mon Feb 13 21:33:45 2012] XMMSAS bgd. selection expression = annulus(27027.309440, 38650.388200, 574.662017, 1149.324033, X, Y) && !ellipse(26853.764893, 37866.945892, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 13 21:33:45 2012] Writing fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3.gif
[Mon Feb 13 21:33:46 2012] Mean detx,y = (-3602.37, 10214.37) 
[Mon Feb 13 21:33:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 21:33:53 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 21:33:53 2012] Setting source spectrum file to fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 13 21:33:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Feb 13 21:39:30 2012] Updating aperture counts using extracted products
[Mon Feb 13 21:39:30 2012] Error reading totcts from fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 13 21:39:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 21:39:30 2012] Using photon index=1.80, rate=0.0207, arf fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3.arf
[Mon Feb 13 21:39:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 21:39:30 2012] Updating source flux to 5.1e-13
[Mon Feb 13 21:39:38 2012] Reading fit data from xmm0556211901/analysis//spectral/fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3_pl.csv
[Mon Feb 13 21:39:38 2012] Spectral fit parameter nH value = 2.17685e+13
[Mon Feb 13 21:39:38 2012] Spectral fit parameter PhoIndex value = 1.87328
[Mon Feb 13 21:39:38 2012] Failed to get F(0.3-8.0) from xmm0556211901/analysis//spectral/fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 21:39:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 21:39:38 2012] Using Nh = 2.2e+13, photon index=1.87, rate=0.0207, arf fullrun_mos2_xmm0556211901_pi300-10000_pass1_cl_src3.arf
[Mon Feb 13 21:39:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 21:39:38 2012] Updating source flux to 4.9e-13