[Sat Jun  9 18:06:38 2012] Detection parameters:
  Position = (114.8, 306.8) = 10 43 36.98 59 38 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.4 +/- 6.9
  Background counts = 2.4
  Rate = 0.005 +/- 0.001

[Sat Jun  9 18:06:38 2012] Off-axis axis estimate = 13.33'
[Sat Jun  9 18:42:57 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 18:42:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 18:42:57 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Sat Jun  9 18:42:57 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.994
[Sat Jun  9 18:42:57 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.09"
[Sat Jun  9 18:53:01 2012] fullrun_mos2_xmm0556211701_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun  9 18:53:01 2012] fullrun_mos2_xmm0556211701_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun  9 18:53:01 2012] Fit fullrun_mos2_xmm0556211701_pi300-10000_cl_pass0_src5 appears to have run properly
[Sat Jun  9 18:53:01 2012] fullrun_mos2_xmm0556211701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun  9 18:53:01 2012] fullrun_mos2_xmm0556211701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun  9 18:53:01 2012] Fit fullrun_mos2_xmm0556211701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun  9 18:53:13 2012] Spatial fit model total counts = 53.002400, observed total counts = 53.000000
[Sat Jun  9 18:53:13 2012] Offset between fit and detection position for source 2 = 0.385554 pixels
[Sat Jun  9 18:53:13 2012] 53.116570 total counts/ 9.302270 bgd. counts: snr = 14.365522
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.385554 pixels
  Position = (115.1, 306.6) = 10 43 36.77 59 38 20.7
  Extent = 14.4 (9.2-20.5)", rotation angle = 0
  Source counts = 43.8 +/- 7.3
  Background counts = 9.3
  Rate = 0.008 +/- 0.001
[Sat Jun  9 18:53:13 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 18:53:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 18:53:13 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 18:53:13 2012] Source does appear to be extended
[Sat Jun  9 18:53:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 19:27:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 19:27:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 19:27:24 2012] Initial guess for spatial extent in simple fitting = 14.44"
[Sat Jun  9 19:27:24 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.959
[Sat Jun  9 19:27:24 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.44"
[Sat Jun  9 19:38:07 2012] fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun  9 19:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_src5.csv
[Sat Jun  9 19:38:07 2012] fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun  9 19:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_src5.csv
[Sat Jun  9 19:38:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 19:38:07 2012] fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun  9 19:38:07 2012] fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun  9 19:38:07 2012] Fit fullrun_mos2_xmm0556211701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun  9 19:38:15 2012] Spatial fit model total counts = 63.978000, observed total counts = 63.000000
[Sat Jun  9 19:38:15 2012] Offset between fit and detection position for source 2 = 0.473233 pixels
[Sat Jun  9 19:38:15 2012] 65.287700 total counts/ 34.545900 bgd. counts: snr = 5.230353
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.473233 pixels
  Position = (114.7, 306.6) = 10 43 37.04 59 38 20.4
  Extent = 11.5 (7.8-18.4)", rotation angle = 0
  Source counts = 30.7 +/- 8.1
  Background counts = 34.5
  Rate = 0.005 +/- 0.001
[Sat Jun  9 19:38:15 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 19:38:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 19:38:15 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 19:38:15 2012] Source does appear to be extended
[Sat Jun  9 19:38:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 19:55:51 2012] XMMSAS src. selection expression = ellipse(9928.341000, 26623.799200, 689.658020, 689.658020, 0.000000, X, Y)
[Sat Jun  9 19:55:51 2012] Writing source region out to fullrun_mos2_xmm0556211701_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun  9 19:55:51 2012] Extracting stamp from image fullrun_mos2_xmm0556211701_pi300-10000_cl_sm2.00.img.gz, (75, 267) - (154, 346)
[Sat Jun  9 19:55:51 2012] XMMSAS bgd. selection expression = annulus(9928.341000, 26623.799200, 1149.430033, 2298.860066, X, Y)
[Sat Jun  9 19:55:51 2012] Writing fullrun_mos2_xmm0556211701_pi300-10000_pass1_cl_src2.gif
[Sat Jun  9 19:57:40 2012] Mean detx,y = (-14234.60, -5755.00) 
[Sat Jun  9 19:57:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 19:58:07 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 19:58:07 2012] Setting source spectrum file to fullrun_mos2_xmm0556211701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  9 19:58:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556211701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun  9 19:58:43 2012] Not generating rmf since there are only 30 counts
[Sat Jun  9 19:58:43 2012] rmf not generated due to insufficient counts
[Sat Jun  9 19:59:07 2012] Updating aperture counts using extracted products
[Sat Jun  9 19:59:07 2012] Error reading totcts from fullrun_mos2_xmm0556211701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  9 19:59:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 19:59:08 2012] Using photon index=1.80, rate=0.00535, arf fullrun_mos2_xmm0556211701_pi300-10000_pass1_cl_src2.arf
[Sat Jun  9 19:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 19:59:08 2012] Updating source flux to 1.2e-13
[Sat Jun  9 19:59:10 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  9 19:59:11 2012] xmm0556211701/analysis//spectral/fullrun_mos2_xmm0556211701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete