[Thu May 9 15:25:35 2013] Detection parameters: Position = (351.0, 265.8) = 10 46 27.25 57 30 5.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 70.2 +/- 12.6 Background counts = 20.0 Rate = 0.01 +/- 0.002 [Thu May 9 15:25:35 2013] Off-axis axis estimate = 4.49' [Thu May 9 15:26:39 2013] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting [Thu May 9 15:26:39 2013] Initial guess for spatial extent in simple fitting = 8.67" [Thu May 9 15:26:39 2013] source mask rpix=2.0, npix_max = 24, mask sum = 15, frac = 0.603 [Thu May 9 15:26:39 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.67" [Thu May 9 15:40:53 2013] fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_src9.ximg exists [Thu May 9 15:40:53 2013] fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_src9_1.ximg exists [Thu May 9 15:40:53 2013] Fit fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_src9 appears to have run properly [Thu May 9 15:40:53 2013] fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Thu May 9 15:40:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_tfrozen_src9.csv [Thu May 9 15:40:53 2013] fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Thu May 9 15:40:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_tfrozen_src9.csv [Thu May 9 15:40:53 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556211601_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 16:08:21 2013] Spatial fit model total counts = 241.941000, observed total counts = 224.000000 [Thu May 9 16:08:21 2013] Offset between fit and detection position for source 10 = 0.774784 pixels [Thu May 9 16:08:21 2013] 245.148500 total counts/ 194.991000 bgd. counts: snr = 3.591936 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.774784 pixels Position = (350.9, 265.0) = 10 46 27.34 57 30 8.2 Extent = 10.3 (6.8-15.4)", rotation angle = 334 (326-339) degrees Source counts = 50.2 +/- 15.7 Background counts = 195.0 Rate = 0.008 +/- 0.002 [Thu May 9 16:08:21 2013] Vigneting correction estimate = 1.000000 [Thu May 9 16:08:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 16:08:21 2013] Assessing source extent using major axis lower bound [Thu May 9 16:08:21 2013] Source does appear to be extended [Thu May 9 16:08:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.06 [Thu May 9 16:08:21 2013] Source is asymmetric [Thu May 9 16:08:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 9 16:08:30 2013] Initial guess for spatial extent in simple fitting = 6.22" [Thu May 9 16:08:30 2013] source mask rpix=1.4, npix_max = 14, mask sum = 8, frac = 0.537 [Thu May 9 16:08:30 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 6.22" [Thu May 9 16:22:04 2013] fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_src9.ximg exists [Thu May 9 16:22:04 2013] fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_src9_1.ximg exists [Thu May 9 16:22:04 2013] Fit fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_src9 appears to have run properly [Thu May 9 16:22:04 2013] fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Thu May 9 16:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_tfrozen_src9.csv [Thu May 9 16:22:04 2013] fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Thu May 9 16:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_tfrozen_src9.csv [Thu May 9 16:22:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556211601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 16:49:48 2013] Spatial fit model total counts = 241.915000, observed total counts = 224.000000 [Thu May 9 16:49:48 2013] Offset between fit and detection position for source 10 = 0.009474 pixels [Thu May 9 16:49:48 2013] 245.126600 total counts/ 195.031000 bgd. counts: snr = 3.587135 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.009474 pixels Position = (350.9, 265.0) = 10 46 27.34 57 30 8.2 Extent = 10.2 (6.8-12.4)" x 2.2 (1.6-3.3)", rotation angle = 333 (326-339) degrees Source counts = 50.1 +/- 15.7 Background counts = 195.0 Rate = 0.008 +/- 0.002 [Thu May 9 16:49:48 2013] Vigneting correction estimate = 1.000000 [Thu May 9 16:49:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 16:49:48 2013] Assessing source extent using major axis lower bound [Thu May 9 16:49:48 2013] Source does appear to be extended [Thu May 9 16:49:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.10 [Thu May 9 16:49:48 2013] Source is asymmetric [Thu May 9 16:49:57 2013] XMMSAS src. selection expression = ellipse(30476.104220, 23009.631400, 613.068018, 129.599404, 333.309259, X, Y) [Thu May 9 16:49:57 2013] Writing source region out to fullrun_pn_xmm0556211601_pi300-10000_pass1_cl_src10_src.reg [Thu May 9 16:49:57 2013] Extracting stamp from image fullrun_pn_xmm0556211601_pi300-10000_cl_sm2.00.img.gz, (316, 230) - (386, 300) [Thu May 9 16:49:57 2013] XMMSAS bgd. selection expression = annulus(30476.104220, 23009.631400, 1021.780029, 2043.560059, X, Y) [Thu May 9 16:49:57 2013] Writing fullrun_pn_xmm0556211601_pi300-10000_pass1_cl_src10.gif [Thu May 9 16:52:55 2013] Mean detx,y = (-4545.40, -2708.60) [Thu May 9 16:52:57 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 9 16:53:10 2013] Binned source spectrum to 10 counts/bin [Thu May 9 16:53:10 2013] Setting source spectrum file to fullrun_pn_xmm0556211601_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Thu May 9 16:53:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556211601_pi300-10000_pass1_cl_src10_bgd.pi.gz [Thu May 9 17:00:51 2013] Not generating rmf since there are only 50 counts [Thu May 9 17:00:51 2013] rmf not generated due to insufficient counts [Thu May 9 17:17:14 2013] Updating aperture counts using extracted products [Thu May 9 17:17:14 2013] Total counts from fullrun_pn_xmm0556211601_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 48.00 [Thu May 9 17:17:14 2013] Total counts from fullrun_pn_xmm0556211601_pi300-10000_pass1_cl_src10_bgd.pi.gz = 701.00 [Thu May 9 17:17:14 2013] Got source and background scale factors 222332.000000, 7552776.000000 [Thu May 9 17:17:14 2013] User source parameters: Position = (350.9, 265.0) = 10 46 27.34 57 30 8.2 Extent = 10.2 (6.8-12.4)" x 2.2 (1.6-3.3)", rotation angle = 333 (326-339) degrees Source aperture counts = 27.4 +/- 8.0 Background aperture counts = 20.6 Rate = 0.004 +/- 0.001 [Thu May 9 17:17:15 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 9 17:17:15 2013] Using photon index=1.80, rate=0.00768, arf fullrun_pn_xmm0556211601_pi300-10000_pass1_cl_src10.arf [Thu May 9 17:17:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 9 17:17:15 2013] Updating source flux to 4.7e-14 [Thu May 9 17:17:21 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting [Thu May 9 17:17:22 2013] xmm0556211601/analysis//spectral/fullrun_pn_xmm0556211601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete