[Sun Feb 26 10:21:35 2012] Detection parameters:
  Position = (369.7, 336.6) = 10 38 21.47 57 59 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.3 +/- 11.3
  Background counts = 22.2
  Rate = 0.01 +/- 0.002

[Sun Feb 26 10:21:35 2012] Off-axis axis estimate = 5.86'
[Sun Feb 26 10:24:12 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 10:24:12 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Sun Feb 26 10:24:12 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.889
[Sun Feb 26 10:24:12 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.36"
[Sun Feb 26 10:45:53 2012] fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_src3.ximg exists
[Sun Feb 26 10:45:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_src3.csv
[Sun Feb 26 10:45:53 2012] fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Feb 26 10:45:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_src3.csv
[Sun Feb 26 10:45:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 10:45:53 2012] fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 26 10:45:53 2012] fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 26 10:45:53 2012] Fit fullrun_pn_xmm0556210901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb 26 11:18:15 2012] Spatial fit model total counts = 96.998900, observed total counts = 97.000000
[Sun Feb 26 11:18:15 2012] Offset between fit and detection position for source 4 = 0.089453 pixels
[Sun Feb 26 11:18:15 2012] 94.726100 total counts/ 62.606400 bgd. counts: snr = 4.059402
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.089453 pixels
  Position = (369.6, 336.5) = 10 38 21.51 57 59 25.0
  Extent = 6.0 (3.6-9.3)", rotation angle = 0
  Source counts = 32.1 +/- 9.7
  Background counts = 62.6
  Rate = 0.009 +/- 0.003
[Sun Feb 26 11:18:15 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 11:18:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 11:18:15 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 11:18:15 2012] Source does appear to be extended
[Sun Feb 26 11:18:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 11:18:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 11:18:30 2012] Initial guess for spatial extent in simple fitting = 6.02"
[Sun Feb 26 11:18:30 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.844
[Sun Feb 26 11:18:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.02"
[Sun Feb 26 11:36:25 2012] fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_src3.ximg exists
[Sun Feb 26 11:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_src3.csv
[Sun Feb 26 11:36:25 2012] fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Feb 26 11:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_src3.csv
[Sun Feb 26 11:36:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 11:36:25 2012] fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Feb 26 11:36:25 2012] fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Feb 26 11:36:25 2012] Fit fullrun_pn_xmm0556210901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Feb 26 12:06:01 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Sun Feb 26 12:06:01 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 12:06:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 12:06:01 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 12:06:01 2012] Source does appear to be extended
[Sun Feb 26 12:06:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 12:06:14 2012] XMMSAS src. selection expression = ellipse(32109.072200, 29229.318600, 361.456210, 361.456210, 0.000000, X, Y)
[Sun Feb 26 12:06:14 2012] Writing source region out to fullrun_pn_xmm0556210901_pi300-10000_pass1_cl_src4_src.reg
[Sun Feb 26 12:06:14 2012] Extracting stamp from image fullrun_pn_xmm0556210901_pi300-10000_cl_sm2.00.img.gz, (349, 316) - (390, 357)
[Sun Feb 26 12:06:14 2012] XMMSAS bgd. selection expression = annulus(32109.072200, 29229.318600, 602.427017, 1204.854035, X, Y) && !ellipse(30171.258514, 28726.046417, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 12:06:14 2012] Writing fullrun_pn_xmm0556210901_pi300-10000_pass1_cl_src4.gif
[Sun Feb 26 12:09:08 2012] Mean detx,y = (5687.72, -457.52) 
[Sun Feb 26 12:09:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 12:09:32 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 12:09:33 2012] Setting source spectrum file to fullrun_pn_xmm0556210901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 26 12:09:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556210901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Feb 26 12:24:40 2012] Not generating rmf since there are only 32 counts
[Sun Feb 26 12:24:40 2012] rmf not generated due to insufficient counts
[Sun Feb 26 12:32:50 2012] Updating aperture counts using extracted products
[Sun Feb 26 12:32:50 2012] Error reading totcts from fullrun_pn_xmm0556210901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 26 12:32:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 12:32:51 2012] Using photon index=1.80, rate=0.00933, arf fullrun_pn_xmm0556210901_pi300-10000_pass1_cl_src4.arf
[Sun Feb 26 12:32:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 12:32:51 2012] Updating source flux to 3.3e-14
[Sun Feb 26 12:32:56 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 26 12:32:57 2012] xmm0556210901/analysis//spectral/fullrun_pn_xmm0556210901_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete